Product

High Voltage Amplifier

WMA-100A

-

Falco Systems

WMA-100A - Falco Systems

The WMA-100A model is our cost-effective, compact, general purpose high voltage amplifier. With its high quality and small form factor, it is the ideal choice for any experiment that requires an all-round, reliable high voltage amplifier. It can also be used as a stand-alone low noise high voltage power supply. Two WMA-100A amplifiers and a WMA-IB-HS phase inverter - buffer can be used to double the output voltage.

Product

Super MUTT Deluxe Standard Edition

#9008-SE

-

Innovative Products of America

#9008-SE - Innovative Products of America

The Super MUTT places a load on the trailer's electrical circuits to identify wiring problems while providing remote control operation over both air brakes and lights. Built to facilitate a one-man testing operation, the Super MUTT reduces guesswork and inspection time to prevent failures that lead to expensive road calls and citations. The remote control allows for repetitive air brake actuation at each axle to reveal developing problems often missed by normal testing procedures.

Product

Working Standard Shunts

CSW

-

Ohm-Labs, Inc.

CSW - Ohm-Labs, Inc.

CSW shunts are rated to 100 % continuous current with no loss of accuracy. They are largely immune from connection errors common to many shunts. All CSW shunts include ISO17025 accredited calibration through full current range.

Product

Dielectric Withstanding Voltage Test

-

Aero Nav Laboratories, Inc.

Aero Nav Laboratories, Inc.

The dielectric withstanding voltage test (also called high-potential, over-potential voltage-breakdown, or dielectric-strength test) consists of the application of a voltage significantly higher than rated voltage for a specific time, between mutually insulated portions of a component part or between insulated portions and ground. This is used to prove that the component part can operate safely at its rated voltage and withstand momentary over-potentials due to switching, surges, and other similar phenomena.

Product

DC Voltage & Current Data Logger

-

Monarch Instrument

Monarch Instrument

The Track-It™ DC Voltage and Current Data Loggers are two channel battery powered stand alone compact data loggers that record up to 32,000 samples each of DC Voltage or Current data. Units are available in 4 DC voltage ranges or for DC current. Simply plug the data logger into an available USB port on your PC and customize the settings or transfer data with the included Track-It Software program.

Product

NI-9205, cDAQ-9171, and cRIO-9940 USB Voltage Measurement Bundle

865683-01

-

NI

865683-01 - NI

NI-9205, cDAQ-9171, and cRIO-9940 USB Voltage Measurement Bundle - The USB Voltage Measurement Bundle with NI-9205, cDAQ-9171, and cRIO-9940 includes the NI-9205 C Series Voltage Input Module and the cDAQ-9171 CompactDAQ Chassis for voltage measurements. This bundle also includes the cRIO-9940 Backshell for strain relief and operator protection from high-voltage signals. The included NI-9205 features a channel-to-earth ground double isolation barrier for safety, noise immunity, and high common-mode voltage range. Additionally, the NI-9205 provides up to 60 V of overvoltage protection between input channels and common, and it is rated for 1,000 Vrms transient overvoltage protection.

Product

Voltage Sag Generator

SKS-1120GTB

-

Shanghai Sanki Electronic Industries Co., Ltd.

SKS-1120GTB - Shanghai Sanki Electronic Industries Co., Ltd.

The cycle drop simulator is used to reproduce the voltage fluctuation phenomenon of commercial power supplies. Simulate the grid voltage drop and short-term interruption caused by the accident or the sudden change of the large load in the low-voltage power grid, or the grid voltage change caused by the continuous change of the load. Used to evaluate the performance of the equipment under these voltage changes.

Product

Voltage Maintenance Program

VoltRef

-

Data Proof

VoltRef - Data Proof

VoltRef provides the power of automation formaintaining statistical control of the volt in yourlaboratory. This program controls a low thermalscanner and voltmeter to compare voltagestandards using the process recommended by NISTand other national laboratories.

Product

Dropout, Surge, Ripple Simulator and AC/DC Voltage Source

DSR 100 Series

-

AE Techron, Inc.

DSR 100 Series - AE Techron, Inc.

DSR 100 Series systems provide complete, single-box solutions for immunity testing. They include a simple-to-use yet powerful standards waveform generator matched with an industry leading power supply technology and come with an extensive library of tests for many automotive and aviation standards.

Product

12 Pulse SCR Controlled High Voltage Power Supply

-

Carl E. Holmes Company

Carl E. Holmes Company

- 12 Pulse SCR Controlled Power Supply, P/N 19435PS- Input: 480 VAC, 300 Amps, 3 PH, 60 Hz- Output: 0 to 3000 VDC ± 10%, 80 Amps max adjustable with potentiometers, and 4/20 mA input signals from the PLC- Output voltage and current are provided as 4/20 mA signals to PLC- Contactor and overload relay are installed for protection- Power ON Light- Start / Stop capability- EPO capability- Manual voltage control and current limit- PLC interface- Output voltage and current are displayed on the voltmeter and ammeter.- A selector switch is used to select between manual Control or PLC Control- The customer is responsible for the PLC controller and PLC programming- Power enclosure, 68″H x 65″W x 44″D- Control enclosure: 20″H x 16″W x 9″D- Weight: 5000 lbs. approximately- All input/output connections are inside the enclosure

Product

High Voltage 50 Ω Pulse Generator

TLP-12010A

-

High Power Pulse Instruments GmbH

TLP-12010A - High Power Pulse Instruments GmbH

The high-current TLP/HMM test system TLP-12010A offers advanced features intended for the characterization of semiconductor devices, discrete components, such as TVS, varistors, capacitors, gas tubes, circuits and systems in the high power time domain. It includes high current I-V characteristics inpulsed operation mode, turn-on/off transient characteristics of the device, breakdown effects, charge recovery effects e.g. reverse recovery, Safe-Operating-Area (SOA) and ESD measurements in general.

Product

Voltage Probe

VOL-PBE

-

Lisun Electronics Inc.

VOL-PBE - Lisun Electronics Inc.

• EMI Receiver equipped with voltage probe can test disturbance voltage from load terminals or control terminals

Product

Low Voltage Power Supply Solutions

-

Advanced Energy

Advanced Energy

AC-DC Configurable. Advanced Energy is proud to offer highly reliable and cost-efficient low voltage power supply solutions. The Excelsys low voltage power supply product line has more than 20 years of experience of engineering power-density rich and extremely efficient supplies for a variety of markets.

Product

Low Level, DC Voltage Data Logger

Volt101A

-

MadgeTech, Inc

Volt101A - MadgeTech, Inc

The Volt101A is one of MadgeTech's newest data loggers. It is part of a new series of low cost, state-of-the-art data logging devices. MadgeTech has taken the lead in offering the most advanced, low cost, battery powered data loggers in the world today.

Product

High Voltage Impulse Test Set Up

-

NEO TELE-TRONIX PVT. LTD

NEO TELE-TRONIX PVT. LTD

We are renowned as the foremost manufacturer and exporter of High Voltage Impulse Test Set Up. This testing equipment is demanded in electrical, power generation and engineering sector. It is incorporated with fiber optic isolated digitizers to test various types of transformers. We utilize excellent grade raw materials to engineer and develop this High Voltage Impulse Test Set Up in accordance with industry standards. Our clients can get this equipment from us at competitive price.

Product

PC Controlled High Voltage Tester

Cablescan H8

-

Cablescan, Inc.

Cablescan H8 - Cablescan, Inc.

The Cablescan H8 provide the PC-based power of the larger PC based testers, but in an economical package for users who do not require more than 512 test points. This analyzer is designed to operate under the control of your PC.

Product

Calibrated Leak Standards

-

LeakMaster

LeakMaster

LeakMaster is a leader in the industry when it comes to the manufacturing of calibrated leak standards  (calibrated leak orifices). Each leak standard is meticulously manufactured to a specific leak or flow rate at a predetermined pressure. The purpose of each leak standard is to teach, or calibrate a leak test program, and allow the leak test instrument to memorize the characteristics of a leaking part. These leaks are also introduced into production parts to simulate a “leaking or failed” part condition. LeakMaster supplies a calibrated leak standard with every leak test instrument, and provides recertification services for all of their leak standards

Product

Voltage And Current Amplifier

KINGSINE KA30 / KA60

-

KINGSINE Electric Automation Co., Ltd.

KINGSINE KA30 / KA60 - KINGSINE Electric Automation Co., Ltd.

KINGSINE's KA30 / KA60 voltage and current amplifier is high accuracy, high power, Panel-mounted type real time simulation power amplifier with four-phase voltage and three-phase current.

Product

Conformance Calibration Standard Test Card for GS1-DataBar Symbol Verifiers

AI-CCS-DATABAR

-

Applied Image, Inc.

AI-CCS-DATABAR - Applied Image, Inc.

This test card is ideal for testing verifiers, scanners, and other GS1-DataBar barcode reading equipment. It also can serve as an excellent training aid to ensure new operators are using the proper methodology and are proven competent in the use of verifiers.