Product

Antenna, Biconical

EM-6912A | 30 Mhz – 300 MHz

-

Electro-Metrics Corp.

EM-6912A | 30 Mhz – 300 MHz - Electro-Metrics Corp.

A balun, feedline, and element cage give the Electro-Metrics EM-6912A response curves that are almost linear, making it ideal for swept measurements. An added benefit is that the EM-6912A has an improved BALUN design, which makes it insensitive to changes of orientation while vertically polarized. Readings obtained will be the same no matter which element is closest to the ground plane, eliminating a potential source of measurement error.

Product

Multi-Truck Steri-Dry™ Sterilizer

-

Gruenberg

Gruenberg

The Gruenberg Steri-Dry™ Dry Heat Lab Animal Science Sterilizer provides the lab animal science market with equipment to sterilize habitat cages through the process of dry heat sterilization. Gruenberg dry heat sterilizers are designed for lab animal science applications.

Product

Animal Temperature Controller - Low Voltage

TCAT-2LV

-

Physitemp Instruments

TCAT-2LV - Physitemp Instruments

Our TCAT-2 family of general purpose PID Autotuning Controllers provides accurate temperature control in a variety of laboratory applications. Combined with a heat lamp or heating pad, the TCAT-2 may be used to maintain the body temperature of anesthetized animals during surgery or stereotaxic procedures. Small animal cages are easily warmed with a heat lamp. The TCAT-2 may also be used in cooling applications, such as to control independent perfusate cooling systems. Realizing that laboratory applications are diverse, Physitemp can provide several versions of the TCAT Controller. The model specified depends on whether a laboratory has a general or specific need for the controller

Product

Analog Input Module, 12-bit A/D

IP320A

-

Acromag, Inc.

IP320A - Acromag, Inc.

The IP320A monitors 20 differential or 40 single-ended input channels. When used with a carrier that holds four IP modules, up to 160 inputs can be obtained from a single card cage slot.

Product

Single Truck Steri-Dry™ Sterilizer

-

Gruenberg

Gruenberg

The Gruenberg Steri-Dry™ Dry Heat Lab Animal Science Sterilizer provides the lab animal science market with equipment to sterilize habitat cages through the process of dry heat sterilization. These sterilizers are designed and built for lab animal science applications.

Product

VITA, Type 11V, 19" Rackmount Family

11V-VITA

-

ELMA Electronic, Inc.

11V-VITA - ELMA Electronic, Inc.

Elma Type 11 family of enclosures, VITA System applications. Designed to IEEE 1101.10/.11, EMC shielding. 3U-9U cards mounted vertically or horizontally with custom sizes possible. Systems can be configured with or without rear I/O card cage.

Product

Edge Mini Server System

UBX-510SZ

-

Advantech Co. Ltd.

UBX-510SZ - Advantech Co. Ltd.

Edge Mini Server System with Intel® Xeon® W-12xx or 10th Gen. Core™ i7/i5/i3 Series Processor. Built-in an Intel® Xeon® W-12xx or 10th Gen Core™ i3/i5/i7 processor, Supports Windows Server 2019/2022 or Windows 10/11. Plentiful I/O ports for various apploications, Easy-maintenance hard drive cage for large storage (RAID) capability, Flexible PCIe expansion.

Product

Extender Boards

-

VECTOR Electronics and Technology, Inc.

VECTOR Electronics and Technology, Inc.

Extender boards are designed to bring a circuit card completely out of a card cage or enclosure so that it can be tested or debugged. This provides access to both sides of the test board.

Product

Rodent Behaviour Measurement System

LABORAS®

-

Metris B.V.

LABORAS® - Metris B.V.

LABORAS is a high throughput system for automated recognition of a large number of rat and mouse behaviors. LABORAS is completey non-invasive, uses a home cage environment and automatically determines accurate and consistent behavioral data without the need of human observers. In addition LABORAS calculates precise position tracking parameters.

Product

Vivarium Dry Heat Sterilizers

-

Gruenberg

Gruenberg

Gruenberg manufactures a range of lab-animal science sterilizers for the decontamination and sterilization of animal-habitat cages and equipment. Available in cabinet style; open-truck, bulk configurations; closed-container style; and pod configurations, Gruenberg vivarium sterilizers eliminate harmful pathogens to protect both scientists and laboratory animals.

Product

RF Shielding Services

-

LBA Group, Inc

LBA Group, Inc

LBA offers complete architectural RF shielding capabilities, including RF shielding for communications, medical and other radio frequency interference sensitive facilities. LBA is a major provider of architectural shielding solutions for buildings, laboratories and other spaces. LBA also offers other RF shielding materials, such as paints, fabrics and faraday cages, as well as an integrated line of shielding components to provide a comprehensive shielding system.

Product

Electric Burn-in Board Carts

-

Micro Control Company

Micro Control Company

Conforms to SEMI ergonomic standards Holds and transports card cages for semi-automatic loading/unloading. Holds up to 10 burn-in boards. Raises and lowers the burn-in boards for easy loading/unloading of boards into ovens or onto test benches. Cart can be adapted to dock with any Micro Control oven.

Product

Fibre Channel Modules

-

AIM GmbH

AIM GmbH

AIM’s Fibre Channel test, simulation and analysis modules use our field proven Common Core hardware design giving you the best performance, best feature set and highest functional integration on the market. The use of SoC (System on Chip) based core designs with one dual core RISC processor per port, massive and scalable DDR3 memory and IRIG-B time encoder/decoder functions are standard. The new ultra high performance intelligent 4-lane PCIe 2.0 interface modules offer 2 ports with full function test, simulation, monitoring and analyzer functions for Fibre Channel networks. The dual core processor provides onboard processing and data transfer capabilities for the most demanding Fibre Channel applications including upper layer protocol support done on board level. Large and high data throughput DDR3 RAM is accessible for the onboard processor as is a high performance FPGA implementing the customized Fibre Channel interfaces enabling the board to analyze incoming and modify outgoing data in real time. Each module provides 2 Fibre Channel compliant full duplex ports, implementing the full link level services. SFP cages make it suitable for different media types as optical or electrical network technologies. Ports operate either in Traffic Simulator or Analyzer/Monitor mode with support for port related Frame Statistics. Sophisticated packet capturing mechanism and monitoring features are complimented with powerful triggering and filtering capabilities.

Product

Small Form Factor (SFF)

-

ELMA Electronic, Inc.

ELMA Electronic, Inc.

The modular design of the Mini ATR platform allows for various configurations. The chassis can easily be scaled up or down while using the same side walls. DC and AC power variations as well as custom front I/O configurations are available. Elma also offers a wide selection of backplanes in various architectures and has different milled card cage sizes off-the-shelf.

Product

3U VPX RL Thermal Load Simulation Module

-

PCI EmbeddedComputer Systems

PCI EmbeddedComputer Systems

The 3U power test module is an ideal solution for evaluating heat dissipation in a rugged conduction cooled VPX cage or chassis. This card is a thermal load in the chassis to evaluate the heat dissipation. The chassis can be monitored with temp sensing probes and or FLIR imaging. Different wattages are selected by setting dip switches. The +5 and 3.3V loads are on the top of the module. The +12V and -12V loads are on the bottom side of the module.

Product

Faraday Cages

-

LBA Group, Inc

LBA Group, Inc

LBA's EMFaraCage® faraday cages are EMI and RFI shielding boxes and RF test enclosures that bring convenience to device testing. Faraday cages are ideal for isolating critical systems in high field RF environments or wherever RF ingress or egress must be minimized. Security, production testing, biomedical research and semiconductor testing are only a few of the many areas where EMFaraCage® faraday shielded enclosures are employed. EMFaraCage® faraday cage enclosure systems are fully featured to support a wide variety of test missions. The standard faraday cages include effective power, dataline and RF signal isolation in large test volumes. EMFaraCage® faraday cages are much more affordable than shielded room solutions and offer the convenience of portability.

Product

Heavy Load Ball Screw with Caged Ball Structur

HBN

-

THK America, Inc.

HBN - THK America, Inc.

Heavy Load Ball Screw with Caged Ball Structure. Heavy load ball screws with the caged ball structure (HBN model) drastically improve the rated load compared to the conventional products by utilizing the optimum internal structure for use in heavy load condition. In this model, the caged ball structure is adopted between balls to eliminate collisions and mutual frictions of the balls and improve the lubricant maintenance. This modification brings about a longer lifetime under heavy load conditions.

Product

Analog Output Industry Pack Module, 12-bit D/A

IP220A

-

Acromag, Inc.

IP220A - Acromag, Inc.

The IP220A outputs analog voltage signals to drive up to 16 devices. When used with a carrier that holds four IP modules, up to 64 voltage outputs can be obtained from a single card cage slot.

Product

Low Voltage DC / Battery Powered HV Amplifiers

WMA-01 And WMA-01LF

-

Falco Systems

WMA-01 And WMA-01LF - Falco Systems

The Falco Systems WMA-01 is a high voltage amplifier that runs from an 24 - 30V DC power supply and can be battery powered if required, e.g. for use in a Faraday cage. Its internal high voltage generator is inductor-free and hence does not spread magnetic interference in sensitive experimental setups. The output noise is impressively low at 3mVrms. For extremely low noise applications where bandwidth is not an issue, a dedicated WMA-01LF version is available that contains an output low pass filter capacitor which reduces the bandwidth to 50Hz, but makes the noise drop to below 0.1mVrms. This bandwidth-limited amplifier is ideal for MEMS or piezo positioning with manual voltage adjustment.

Product

Cell Stand

CS-3A

-

ALS Co., Ltd

CS-3A - ALS Co., Ltd

The CS-3A Cell Stand is adopted with CHI series Electrochemical Analyzers and other apparatus directly. The cell is enclosed in a Faraday cage to reduce electrical interference. A built-in gas control allows purging a sample. Gas line is provided to purge next sample, while analyzing the present sample separately, thus increasing productivity. Magnetic stirrer allows for controlling the mixing of the sample for experiments requiring mass transport of electrolyte or analyte to the electrode surface. Cell top positioner with detachable cell cap allows easy removal and replacement of the cell vial as well as the electrodes for rinsing, cleaning, and replacement.

Product

2-in-1 High-Voltage Test Hood

LX-HVE600EC

-

LXinstruments GmbH

LX-HVE600EC - LXinstruments GmbH

2-in-1 high-voltage test hood with integrated interchangeable setHV hood for electrical safety test & function test.The test cells are made of stable, highly insulating plastic and are closed by a swiveling, transparent cover. The built-in safety switch is used to lock the hood and release the high-voltage sources. This ensures that no high voltage is active when the door is open. There is a generously dimensioned wiring space in the floor of the test cage. An interchangeable adapter plate in the test cell - optionally with an interchangeable interface or an interchangeable adapter cassette - allows quick adaptation to different types of test items. Prepared openings enable connectors and other common interfaces or cable bushings to be easily attached. The hood is opened and closed almost effortlessly thanks to precisely coordinated gas springs.