Step Attenuators
-
Product
Attenuator Modules
-
The Analog Devices portfolio of wideband digital attenuators and voltage variable attenuators (VVAs) modules helps meet designers’ diverse needs. Low cost, high accuracy control, and small package options provide solutions for RF and IF applications, including the space, communications, and military industries.
-
Product
Step Probes F73216B1019G150SP
1006575
-
The F73216B1019G150SP Step Probes, designated under the model number F732SP, are engineered for precision and reliability in various industrial applications. With a pitch of just 2.54 mm, these step probes are designed to maintain consistent contact under fluctuating temperatures ranging from -45°C to +100°C. They embody a host of mechanical advantages, including a preload force of 60 cN and a maximum travel of 5 mm, ensuring optimal performance in demanding environments.
-
Product
Step Probe F73316B0064G300SP
1000971
-
The F73316B0064G300SP Step Probe represents the pinnacle of precision engineering, specifically designed for applications requiring meticulous measurements in testing environments. With a pitch of 4.00 mm and capable of operating under extreme temperatures ranging from -45°C to +100°C, this probe is perfect for diverse industrial applications. It ensures reliable performance with a continuous current rating of 10.00 A and a typical contact resistance as low as 25.00 mOhm, making it a valuable tool for engineers and technicians alike.
-
Product
Manual Attenuator (Waveguide)
-
RF Lambda’s manual waveguide attenuators are used to control signal levels using a manual control knob. These are commonly used in test setups or systems where an operator is present and there is a need to change signal levels manually.
-
Product
Step Probes (F733SP) F73316B1036G150SP1
1009014
-
The Step Probes (F733SP) F73316B1036G150SP1 are precision engineered to deliver superior performance across a range of demanding applications. Featuring a pitch size of 4.00 mm (157 mil), these probes can operate efficiently in extreme temperatures ranging from -45°C to +100°C. The design is optimized for durability and accuracy, making them suitable for high-quality contact and measurement tasks in various technical environments.
-
Product
Fixed Attenuators
DC to 220GHz
-
RF Attenuators are components that reduce the amplitude level of an incoming frequency signal. They are used to protect systems from receiving a signal with a power level that is too high to process. There are various types of fixed attenuators that can fit your engineering needs. Precision MMW will help you with the highest quality fixed attenuator products needs.View more Fixed Attenuators
-
Product
Dual Attenuator
V859
-
The Model V859 is a passive dual section attenuator housed in a 1-unit VME module; the module does not require any power supply since it is made up of resistive cells
-
Product
Source - 20 GHz Source with Amp Attenuator
RI8554A
-
Automated Instruments, Powerful Development Tools and Worldwide Support
-
Product
Coaxial Attenuators Set
11581A
Attenuator
The Keysight 11581A contains a set of four Keysight 8491A attenuators 3, 6, 10 and 20 dB with type-N connectors, furnished in a walnut accessory case. This set is ideal for calibration labs or where precise knowledge of attenuation and SWR is desired.
-
Product
50 GHz Digital Setp Attenuator
PE43508
-
The PE43508 is a 50Ω, HaRP™ technology-enhanced, 6-bit RF digital step attenuator (DSA) that supports a wide frequency range from 9k to 50 GHz. It supports 1.8V control voltage and optional VSS_EXT bypass mode to improve spurious performance, making this device ideal for test and measurement, point-to-point communication systems, and very small aperture terminals (VSAT).
-
Product
Optical Attenuators
-
Guilin GLsun Science and Tech Group Co., LTD
Optical Attenuators by GLSN
-
Product
Variable Optical Attenuators
5418
-
The FOD 5418, 5419, 5420 Variable Optical Attenuators are designed for singlemode application at 1310 and 1550 nm or multimode application at 850 and 1300 nm. They allow variable attenuation settings in range from 0 to 80 dB with resolution 0.05 dB.
-
Product
Digital Attenuators
-
Compact microwave digital step attenuators with low insertion-loss, USB control and power, 60 or 90dB max setting, 0.25 or 0.5dB step size, ranging from 10MHz to 24GHz. Front OLED display and user control buttons standard.
-
Product
Step Probes F17511B0005G100SP
1019058
-
The F17511B0005G100SP Step Probes are precision instruments designed to meet rigorous engineering standards. With compatibility confirmed for both the F175SP and F176SP models, these probes offer unrivaled performance in a variety of applications. Operating efficiently within a temperature range of -45°C to +100°C, they ensure reliable performance under extreme conditions. The innovative design features a compact pitch of 1.90 mm, making them well-suited for high-density circuit board applications.
-
Product
Step Probe (F732SP) F73216B0079G300SP
1001002
-
The Step Probes (F732SP) F73216B0079G300SP are designed with precision and durability for demanding applications. With a pitch of 2.54 mm, these probes are optimized for high-performance connectivity, enabling reliable interactions in various electronic settings. They can function effectively within a temperature range of -45°C to +100°C, making them suitable for environments that experience a wide range of thermal conditions. The additional definition of 'SP' indicates their specialized application in high-density circuits, allowing for compact designs without sacrificing connectivity integrity.
-
Product
HVFO10X +/-20V (20x Attenuation) Universal Tip Accessory
HVFO100-20X-TIP-U
-
HVFO10X +/-20V (20x Attenuation) Universal Tip Accessory.
-
Product
Variable Optical Attenuator
CARY-VA3301B
-
The CARY-VA3301B handhold variable optical attenuator is used for continuously variableoptical signal attenuation. Since the variable optical attenuator is used in the laser system for the on-line testing, CARY-VA3301B can be used in the digital system of communicationdevices (such as: PHD, SDH) and also can be used in the CATV system testing.
-
Product
Attenuator Interconnect Kit, SMA
11716C
Interconnect Adapter
The Keysight 11716C quickly and conveniently connects 1 dB step and 10 dB step attenuators together to achieve greater dynamic range with 1 dB steps. The Keysight 11716C can be utilized to connect any of the two Keysight 8494/95/96 attenuators in series.
-
Product
NI-5191, 800 MHz, ±30 V, 10X Attenuation, Differential Active Oscilloscope Probe
781785-01
Oscilloscope
The NI-5191 is a differential, active voltage probe that offers 800 MHz of input bandwidth with a 10:1 attenuation ratio. You can use it with oscilloscopes that provide 50 Ω input impedance. You can power the probe using a Type-N barrel power connector from a USB port or using a 9 V alkaline battery.
-
Product
Small Step Broadband Synthesizer
SBC Series
-
*Connectorized Package *Fine Resolution Design *Broadband Designs Available *Low Phase Noise *Ultra-Low Spurs *Optional Internal Reference
-
Product
Step Up Transformer
MagD
-
SCOPE proudly introduces Step-Up Transformer - MagD, specially designed to cater the needs of testing of instrument Transformers. Before new systems are put into service or after any occurrence of fault, the instrument transformers need to be tested for their outputs. It is to be ensured that these instrument transformers are giving proper outputs to the protective relays. MagD is used to plot excitation curves for instrument transformers. Inbuilt voltmeter and ammeter, eliminates the need of external meters for plotting of curves. It can also be used for de-magnetization of transformer cores and also turns-ratio tests can be conducted using MagD.
-
Product
Digital Attenuator
-
Chengdu KeyLink Microwave Technology Co., Ltd.
The products can be used in microwave electronic components. Its attenuation values are determined by the input TTL/LVTTL control signal. So that the link can be achieved the desired gain or loss value.KeyLink's digital attenuators can be categorized as follows.
-
-
Product
Step Probe F73216B1092G150SP
1029785
-
The F73216B1092G150SP, designated as Step Probe, is engineered for precision measurements and reliability across various applications. This model boasts a pitch measurement of 2.70 mm, making it versatile for use in devices requiring high accuracy in proximity sensing or electrical connectivity. Operating efficiently in temperatures ranging from -45°C to +100°C, the Step Probe is ideal for environments with extreme conditions, ensuring consistent performance without compromising safety or functionality.
-
Product
Step Probe (F732SP) F73211B0042G100SP
1139338
-
The Step Probes (F732SP) model F73211B0042G100SP offers meticulous precision and robust functionality, making it an essential component for specialized electronic testing and assembly applications. With a pitch of 2.54 mm (100 mils), these probes are engineered to operate effectively within extreme temperature variations ranging from -45°C to +100°C. This product seamlessly integrates into tight layouts and is ideal for improved contact reliability across diverse environments. Crafted from high-quality materials, including a beryllium copper plunger plated in gold, the Step Probes ensure excellent electrical characteristics while maintaining a durable design for longevity and performance.
-
Product
Power/Voltage Rail Probe. 4 GHz Bandwidth, 1.2x Attenuation, +/-30V Offset, +/-800mV
RP4030
-
The Teledyne LeCroy RP4030 Power Rail Probe meets the specific requirements of those who need to acquire a low-voltage DC signal as part of a:-Comprehensive power integrity, digital power management IC (PMIC), voltage regulator module (VMR), point-of-load (POL) switching regulator, or low-dropout regulator testing- Complete embedded power management system that includes PMICs, VRMs, POLs, and LDOsThe RP4030 will faithfully acquire a low-impedance, low-voltage DC power/voltage rail signal without unduly loading the device under test (DUT), while providing high offset to allow DC power/voltage rail signal display on an oscilloscope with high gain.
-
Product
Step & Contact Meter
HT2055
-
HT2055 consists in a power unit and a voltmetric unit, necessary for carrying out step and contact voltage measurements in industrial electric installations (TN systems, transformer cabinets) with a rated test current up to 50A.
-
Product
CP400X, 400 MHz, ±60 V, 10X Attenuation, Single-Ended Passive Oscilloscope Probe
784254-01
High Current Probe
The CP400X is a coaxial passive probe with fixed 10X attenuation for oscilloscopes that provide 1 MΩ input impedance. It is 2 meters in length. The CP400X attaches to BNC connections on both the signal input and instrument sides.
-
Product
Step Probes (F733SP) F73316B1002G150SP
1006286
-
The Step Probes (F733SP) F73316B1002G150SP offer precise and reliable measurement capabilities for various applications across industries. With a pitch of 4.00 mm (157 mil), these probes are engineered for optimal performance in environments ranging from -45°C to +100°C. Constructed from high-quality materials, including a beryllium copper plunger with gold plating, and featuring a brass barrel also plated in gold, these probes ensure longevity and resistance to wear and corrosion.In addition to their robust construction, the Step Probes provide superior electrical specifications with a continuous current rating of 10.00 A and a typical contact resistance of just 25 mOhm. Their mechanical specifications include a preload of 50 cN and a maximum travel of 5.00 mm, ensuring accuracy with a pointing precision of +/- 0.10 mm. These features make the F733SP a reliable choice for precision tasks that require both excellent electrical connectivity and mechanical durability.
-
Product
RF Attenuators
-
Home > Products > Test and Measurement > AttenuatorsBird - The RF ExpertsRF AttenuatorsBird manufactures a broad spectrum of devices from 2 W to 4000W. Our resistive product portfolio includes air-cooled, water-cooled, oil-dielectric, convection cooled, and conduction cooled RF attenuators with a wide range of connectors and attenuation values.
