System Integrators
incorporation of all integral elements, orchestrated.
See Also: System Integration, Systems, ATE Integrators
-
Product
nanoSynth® Integrated 6 GHz SMT Synthesizer
Nano Series
-
The SC800 nanoSynth® is a fully integrated broadband CW signal synthesizer that combines multiple PLL, DDS, and frequency dividers into a rugged and miniature 2”x1” surface mountable package. The output frequency range is 25 MHz to 6 GHz with average output power of +10 dBm. Tuning at 1 Hz resolution, the multiple PLL architecture eliminates close-in phase spurs that are associated with fractional-N PLLs. To simplify user communication with the device, an onboard microprocessor performs all necessary computations to control and set the output frequency, reducing the number and complexity of instruction registers.
-
Product
Glare Measurement System
GMS-1000
-
Hangzhou Hopoo Optoelectronics Technology Co., Ltd
Glare is one of the main factors affecting the health of the light environment. At present, there are many different models for glare evaluation, and different evaluation models are used according to the specific lighting application environment. According to the glare evaluation model, glare evaluation needs to be based on a number of key physical parameters. In actual field measurement and analysis, due to the influence of many factors such as the environment, there are higher requirements for the performance of measuring instruments.
-
Product
Metrology & Inspection Systems
-
Our optical and e-beam wafer metrology and inspection products quickly and accurately measure pattern quality before and during high-volume chip manufacturing.
-
Product
Integrated Receivers/Demodulators/Bit Synchronizers
-
Lumistar provides a wide variety of rack mount integrated receiver and diversity combiner systems. Some of these can be configured with multiple receivers, diversity combiners, and bit synchronizers depending on custom requirements. Lumistar does not manufacture any computers, but selects only the finest of the industrial machines available to provide a high performance package. Basic system setup, control, and display software is included with each of these systems at no additional cost.
-
Product
Integrating Sphere
-
The standard test temperature is 25, but high power lamps such as HID lamps and LED outdoor luminaires will produce a lot of heat during the test, thus the temperature inside the integrating sphere can not meet the requirements of IEC standards. Lisun Group designed the Constant Temperatured Integrating Sphere which allows the lamp was tested in a constant air temperature.
-
Product
Cloud-Based One System Platform
VeSion
-
VeEX''s VeSion is a Cloud-Based, One System Platform, representing the next step in innovation for Network Monitoring. VeSion integrates RFmonitoring systems (Return and Forward), advanced DOCSIS Monitoring, DOCSIS Burst Demodulation, Sweep, Ethernet, MPEG, and Workflow and Asset management system, all under one umbrella. VeSion''s one system concept reduces network troubleshooting and problem resolution time significantly.
-
Product
F9 Systems CalBlade
-
The CalBlade backplane calibration fixture isdesigned to permit accurate and convenient impedance and transmission measurements of a HM-Zd backplane. The CalBlade is used to calibratethe logic card connector interface to the backplane rather than to the usual far-end of the coaxial measurement cables. Very accurate impedance, skew and propagation delay measurements are possible since parasitic fixturing effects are removed.
-
Product
Terminal Blocks with System
-
The Phoenix Contact terminal blocks enable a high degree of flexibility in terminal strip design. Choose between various connection technologies and combine the terminal blocks by installing bridges in the double function shaft. The terminal block system features standardized bridging, marking, and test accessories.
-
Product
Dust Monitoring System
CDMS-1000
-
CDMS-1000 is designed with light scattering technology for continuous real-time measurement of particulate concentration along with noise and meteorological parameters. This combination consists of a particle analyzer, camera, sound level meter, and GPRS module.
-
Product
Digital Map Systems
-
Elbit Systems of America’s Global Digital Map Unit is built on a proven design that accommodates multiple data formats and provides unmatched situational awareness to aircrews. The GDMU displays detailed map, flight plan, and threat information to aircrews. Each system performs interactive functions with the mission computers and generates digital video map data for head down displays.
-
Product
VPX Development Systems
-
development system with Backplane Profile BKP6-CEN06-11.2.5-n. Specifically supports OpenVPX and VPX REDI 6U convection or conduction cooled boards and modules.
-
Product
Tool Support Systems
-
New AIMCO FRLs--the supply of clean, dry air is essential to the operation of pneumatic tools. Ensure longer life with proper maintenance for your valuable tools. Ask about our extended warranty on Uryu tools.
-
Product
FMET Systems
-
The Failure Mode and Effect Testing system allows the shorting of any I/O pin to any other I/O pin, including one of 4 common "Rails". Users can establish rules to prevent unwanted shorting conditions.
-
Product
Network Integrated Test, Real-time Analytics & Optimization Solution
Nitro
-
The VIAVI Network Integrated Test, Real-time analytics and Optimization (NITRO) solution is the first real-time intelligence platform that connects testing and service activation data from instruments with software-based planning, provisioning, assurance and optimization probes and applications, working seamlessly across mobile, fiber, cable, cloud and enterprise networks.
-
Product
Defect Inspection System
NovusEdge
-
The NovusEdge System provides high sensitivity inspection for the edge and backside of bare unpatterned wafers for current and advanced nodes. Multiple modules can be configured on the same automation platform for increased throughput while maintaining a small footprint for an improved cost of ownership.
-
Product
System Controllers
-
Kratos Defense & Security Solutions, Inc.
- Precise and accurate six-axis tracking control- An easy-to-use graphical user interface accessible from anywhere on the network- Optional integrated control capabilities and hardware, such as an integrated spectrum analyzer, beacon receiver, uplink power control, auto acquisition, carrier monitoring & logging, and much more
-
Product
ATE Test Systems
-
Introducing the Procyon ATE System! When it comes to ATE Test Systems for a for low- to high-volume production, Intepro has the testing power you require to be successful. For more than three decades, Intepro Systems has designed, built and integrated power supply test equipment for the world’s largest and smallest power supply manufacturers.
-
Product
Test System
MxDSRC™
-
The MxDSRC Test System simulates systems in the vehicle that interact with the DSRC radio module to create tests closely replicating real-world scenarios. Its integrated approach allows the DSRC components, such as RF quality and protocol conformance, to be exercised with multiple system components. MxDSRC provides a powerful and easy-to-use framework for testing your DSRC system.
-
Product
Electronic System Design
ESD
-
Smart connected devices are everywhere, in homes, in transportation, and at work. This means electronic system design (ESD) is having a greater influence on almost every type of product requiring new simulation tools to help achieve electronic, electrical, mechanical, thermal, and connectivity goals. Altair’s simulation-driven design tools enable your team of specialized engineers to collaborate across all aspects of printed circuit board development from concept to manufacturing. Our products streamline your process, eliminate design iterations, and reduce time-to-market.
-
Product
MirrorLink Test System
Catena 2210
-
The Catena 2210 is a test tool with two USB Network Control Model ("NCM") devices. These devices create a bridge between two USB hosts. Validation testing is made possible by connecting a test control computer to the USB host being tested. Ethernet traffic from the test host is transferred through the Catena 2210 device to the control host, and vice versa.
-
Product
Industrial Weighing Systems
-
Micro Edge Electronics Private Limited
These are fabricated using the best quality raw material and latest technology in accordance with the set industry standards. Well-known for their high durability, optimum performance and resistant to adverse conditions, these can also be customized as per the varied requirements of clients. Our team of quality controllers rigorously check these systems on various specific parameters to ensure their flawlessness.
-
Product
DC SQUID System
-
Quantum Design's patented high-symmetry SQUID design and electronics provide the most rugged and sensitive all-thin-film sensors commercially available, and give you everything you need to configure flexible, powerful detection systems for your research. These sensors can easily withstand the rigors of a laboratory environment such as repeated temperature cycling. Their robust performance offers a level of reliability and adaptability that has earned QD a worldwide reputation as the SQUID of choice. OEM services are also available for special commercial applications.
-
Product
USB System Timer
SKU-077-0X
-
The USB System Timer uses a standard USB interface to synchronize IP signals. This system timer provides accurate clock timing for Asterisk® open-source PBX software.
-
Product
Built-in MOSFET Integrated SiP
-
Renesas Electronics offers SiP products with integrated MOSFETs to enable easy configuration of high-performance multi-phase power supplies. They combine in a single package either controller, driver, and MOSFETs or driver and MOSFETs. These products make it easy to build a high-performance DC/DC converter while reducing stray capacitance and inductance, and achieving higher mounting density.
-
Product
Measurement System
A0010A RIN
-
Realizes world's widest 40 GHz measurement bandwidth with high-sensitivity, low-noise 40 GHz optical receiver and Agilent high-performance X-series signal analyzer. SYCATUS developed unique calibration method, which achieves high accuracy and repeatability.
-
Product
Automated Testing System
PV-LIT
-
Thermographic solutions ensure high quality of solar cells and modules.Usable for all types of solar cells and modules (silicon-based or thin-layered)Testing in laboratory and in-line in the course of the manufacturing processTesting of various solar cells and modules through contact and non-contact measurementCell-specific system configuration and determination of test criteria and kind of defects
-
Product
Compact Baking System
LSC series
-
HORIBA's best-selling baking system has been developed to meet the requirements of today’s high technology industries. Without the need of a carrier gas, the system can provide stable vaporization of materials such as TEOS (at a rate of 600 SCCM) and H2O (at a rate of 2 SLM). For ease of access all device maintenance can be performed from the front of the unit.
-
Product
Semiconductor Switching Systems
Keithley 700 Series
-
The high speeds and low currents of semiconductor devices demand high quality, high performance switching of I-V and C-V signals. We offer switching solutions for both semiconductor R&D and production test applications with mainframes that can support up to 2,880 channels and a family of matrix cards designed specifically for semiconductor applications.
-
Product
Streaming System
-
When intermittent errors need to be captured with high speed camera and streaming systems we offer mobile and fix installed systems combined with a powerful software. Slow down your fast processes and gain insight into what happens."
-
Product
330 System
NSX
-
With a combination of inspection plus metrology, NSX 330 System measures multiple applications including wafer-level metrology for micro bumps, RDL, kerf, overlay, and through silicon via (TSV) in a single wafer load.
