Product

Standard for Mass Interconnect Performance

TITAN

-

MAC Panel

TITAN - MAC Panel

TITAN sets the standard for Mass Interconnect performance, configuration modularity and long term reliability. TITAN has been designed to offer exceptional configuration flexibility for use with any ATE platform and offers unparalleled I/O density coupled with the widest selection of contact types available for Mass Interconnect.

Product

Reference Frequency Generator

MFCh

-

Holding Informtest

MFCh - Holding Informtest

*Frequency reproduction accuracy ± 2 x 10 -9 *Output frequency 1 Hz - 10 MHz *Output pulse signal 1 kHz The MFC is designed to generate high-frequency pulse signals with a frequency of 1 kHz and a frequency in the range from 1 Hz to 10 MHz along two output lines. The MFC is designed to operate in measuring systems based on the VXIbus trunk. In the MFC, a rubidium frequency standard is used as a reference frequency source. Time to reach the mode when the power source of the rubidium standard is turned on, no more than 10 min

Product

Standard Measuring

Standards

-

Mitutoyo Corporation

Standards - Mitutoyo Corporation

Gages, height masters, scales

Product

FREQUENCY SYNTHESIZERS (Insight FS) FROM 30 TO 1250 GHz

-

Insight Product Company

Insight Product Company

Insight Product Company introduces a family of new wide band synthesizers of millimeter and submillimeter waves (Insight FS). Insight FS cover frequencies from 30 to 1250 GHz and generate substantial output power. In the millimeter wave range, each synthesizer covers a full waveguide band (Q, U, V, E, W, F, D, G, Y, J). IPWBS provides several options for frequency and amplitude modulation (analog FM/AM modulation, frequency manipulation, pulses modulation).

Product

Standard Voltage 37 Pin D-Type Cables - Connector to Unterminated

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

The connector to unterminated cable assemblies below are not compatible with Pickering products, however, are offered for developing a connection solution for use with other products.

Product

Oxygen/Nitrogen/Hydrogen by Inert Gas Fusion Infrared and Thermal Conductivity Detection

836 Series

-

Leco Corp.

836 Series - Leco Corp.

The ONH836 Oxygen/Nitrogen/Hydrogen Elemental Analyzer is designed for wide-range measurement of oxygen, nitrogen, and hydrogen content of inorganic materials, ferrous and nonferrous alloys, and refractory materials using the inert gas fusion technique.

Product

Standard Method Compliant

-

Shimadzu Corp.

Shimadzu Corp.

Shimadzu System GC Analyzers are built and tested to meet the specific analysis requirements of applicable industry standards.

Product

Impedance Analyser Frequency Response Analyser

C60

-

Cypher Instruments

C60 - Cypher Instruments

The C60 investigates the opaque world of analog networks. The unit operates in two test modes. It can measure the frequency response of a two port system producing a gain/loss and phase graph. It can also measure the reactive response of a two terminal network producing an impedance/admittance and phase graph. Electronic, electrical, electro-acoustic and other networks can be tested with sine wave excitation and the results displayed on a PC.

Product

Standard Precision GNSS Module

AIW-213

-

Advantech Co. Ltd.

AIW-213 - Advantech Co. Ltd.

Half size mini-PCIe form factorStandard Precision GNSS L1 band92 Channels u-blox NEO-M9 engine (GPS, GLONASS, BeiDou, Galileo, QZSS and SBAS)USB 2.0 communication interfaceSupport Dead Reckoning (DR), Including IMU and Oscillator2 second TTFF for Hot Starts, Open sky code start 24 second.Accuracy 1.5M CEPOperating temperature: -40°C ~ +85°C / -40°F ~ 185°F

Product

Radio Frequency Probe (Industrial) HF830SMAm014G500MCXfP

1133673

-

FEINMETALL GmbH

1133673 - FEINMETALL GmbH

The Radio Frequency Probes (Industrial) HF830SMAm014G500MCXfP, with order code 1133673, is designed for precision measurements in testing and development environments. Engineered for a broad temperature range of -45°C to +100°C, this coaxial probe is essential for maintaining signal integrity in various applications. Its robust construction ensures longevity and reliability under rigorous conditions, thanks to materials such as beryllium copper and high-grade steel used in key components.

Product

Frequency Synthesiser

RA062-F2

-

Teledyne Defence & Space

RA062-F2 - Teledyne Defence & Space

The RA062-F2 is a multiple LO module used to generate three pairs of LO signals, each pair being phase matched in order to provide the capability to drive two phase and amplitude matched, high sensitivity narrowband receivers such as might be required for an EW receiver system with DF functionality.The Stepped Frequency Synthesiser is based upon Direct Frequency Synthesis, DFS, whereby the 1GHz input reference signal is multiplied, filtered and mixed to generate a given number of isolated and filtered single tone CW signals from the 1GHz comb. A finely tuned signal is then generated using a multi-way switch to select between the 1GHz spaced CW tones and mixed with fine resolution signals generated using a custom DDS/VCO PLL network. In this way finely tuned signals can be generated between 7.5GHz and 23GHz.

Product

Radio Frequency Probes (Automotive) HF860GT13m011G930MCXfS

1109014

-

FEINMETALL GmbH

1109014 - FEINMETALL GmbH

The Radio Frequency Probes (Automotive) HF860GT13m011G930MCXfS is expertly designed for precision in automotive and electronic applications. This coaxial probe is engineered to operate reliably within a temperature range of -45°C to +100°C, making it suitable for various environments. With a compact pitch of 6.50 mm and the capability to handle a continuous current of up to 10 A, the HF860 provides robust electrical performance with an impedance of 50 ohms and a frequency range of up to 1 GHz. The cleverly constructed probe ensures optimal electrical connectivity while minimizing signal loss, allowing for clear and accurate transmission of radio frequencies.

Product

Frequency and Timing System for ESAs Deep Space Antennas DSA1&2

-

TimeTech GmbH

TimeTech GmbH

TimeTech Frequency and Timing System for ESAs Deep Space Antennas DSA1&2

Product

Conformance Calibration Standard Test Card for ISO/IEC Data Matrix and GS1 DataMatrix Symbol Verifiers

AI-CCS-DM-G Rev A

-

Applied Image, Inc.

AI-CCS-DM-G Rev A - Applied Image, Inc.

This precision 2D barcode Conformance Calibration Standard Test Card is the first 2D test card to provide ALL 12 of the Primary Reference Symbols specified by ISO 15426-2 for barcode verifiers. They are sized from 0.5mm to 0.2mm so that all the symbol sizes specified in Annex A.3.1 can be tested. Symbols 1-4 are GS1 DataMatrix symbols, while symbols 5-12 are ISO/IEC Data Matrix symbols consistent with the ISO/IEC 16022 standard. The card also includes four calibrated reflectance patches.

Product

Standard Gain Horns

-

Anteral S.L.

Anteral S.L.

26 dB typical gain at center frequency. Aluminium made High performance Standard Gain Horn. From 75 GHz up to 500 GHzUG-387 U/M flange. Specific gain values can be requested. We offer two Standard Gain Horn product lines that go from 75 GHz up to 500 GHz, one with high performances for the most demanding of lab applications and the other with reduced prices and sufficient quality for the majority of SGH applications. Anteral makes sure that each client can have the best SGH for their particular needs.

Product

Shaper Of The Reference Frequency

MFC

-

Holding Informtest

MFC - Holding Informtest

The mezzanine module (mezzanine) of the MFC is designed to reproduce on six output lines high-precision frequency values ​​obtained by dividing the frequency from the built-in reference frequency generator.

Product

Standard Brinell Hardness Tester

BRIN400 Series

-

Qualitest International Inc.

BRIN400 Series - Qualitest International Inc.

The Standard Brinell Hardness Tester - BRIN400 Series of closed loop Brinell hardness testers represent the latest in Brinell hardness testing technology. They are robust, reliable, proven and designed to meet a customer’s most demanding requirements in harsh industrial environments such as those found in foundries, forges and steelworks.

Product

AC Wide Frequency Current Shunts

-

Guildline Instruments Ltd

Guildline Instruments Ltd

High-performance, wide-band precision measurement standards used to convert alternating current (AC) into a proportional, measurable voltage output across a broad frequency range.

Product

Global Standard Model For 4 Point Probe Sheet Resistance Automatic Measurement System

RT-3000/RG-1000F

-

NAPSON Corp.

RT-3000/RG-1000F - NAPSON Corp.

*Fully automatic system for large sizes of flat panel with glass loading robot*Tester self-test function, Measurement position correction function, wide measurement range*Min. 0.1 mm meas. resolution and user programmable test pattern*Host (CIM) communication and 2-D/3-D Mapping software

Product

Frequency Counters/Timers

-

Tektronix, Inc.

Tektronix, Inc.

The Tektronix FCA Series frequency counter / timer / analyzer packs the functionality of a frequency counter, frequency meter and timer into one feature-rich instrument. With unprecedented resolution, you can capture very small frequency and time changes. Tektronix frequency counters and timers offer comprehensive analysis modes, including measurement statistics, histograms, and trend plots.