Product

Universal A/V Tester

Tester

JGB Consulting, Inc.

JGB Consulting, Inc.

This tester was built for our client with the specific requirement that specific UUTs can be added to the system by our client. We handled developing test software for the first 2 UUTs utilizing an open programming structure that allowed programming modules to be strung together to create test programs for any additional UUT that our client wants to add in the future.

Product

Bit Error Rate Tester - MATRIQ

Tester

Quantifi Photonics Inc.

Quantifi Photonics Inc.

The BERT is 2 or 4-channel PPG and Error Detector for the design, characterization and production of optical transceivers and opto-electrical components at data rates up to 30 Gb/s.With scalability and exceptional signal fidelity, it is a cost effective test solution for 400 Gb/s communication eco-systems.

Product

Hoist Tester

Tester

JGB Consulting, Inc.

JGB Consulting, Inc.

The system has the capability of operating hyraulic powered hoists, DC powered hoists and 400Hz AC powered hoists. When a unit is connected to the system it is automatically detected and the system will load the unit's control software, acceptance procedures and operational safety limits. By doing all of this the operator does not need to worry about anything other than installing the unit and clicking Run to execute a full test procedure.

Product

Gearbox Tester

Tester

JGB Consulting, Inc.

JGB Consulting, Inc.

The gearbox tester was designed to test the Azimuth Drive Unit (ADU) for a missile launcher. The ADU is the horizontal position controller for the launcher. It consists of a main drive shaft, a manual drive shaft and an output drive shaft. This system uses a multi-axis motion controller to operate.

Product

PAM4 Bit Error Rate Tester.

BERT-1102

Tester

Quantifi Photonics Inc.

BERT-1102 - Quantifi Photonics Inc.

The BERT-1102 is a 4 or 8-channel PPG and Error Detector for the design, characterization and manufacturing test of optical transceivers and opto-electrical components with symbol rates up to 29 GBaud/s in both NRZ and PAM4 formats. With scalability and exceptional signal fidelity, it is a cost-effective test solution for up to 400 Gb/s communication eco-systems.

Product

ABex PXI to Analog Bus Bridge with Digital IOs

ABex AM-300 Controller

BUS Tester

Konrad Technologies GmbH

ABex AM-300 Controller - Konrad Technologies GmbH

The ABex system controller ABex AM-300 is required to control the analog bus of a ABex chassis. It is used as an interconnection bridge between PXI and ABex backplane.In addition it features a whole bunch of additional functionality. Despite the 96 open drain outputs it has galvanically isolated IOs, and communication interfaces.

Product

AXIe M8000 Series of BER Testers

Bit Error Rate Tester (BERT)

Keysight Technologies

Keysight Technologies

Simplified time-efficient testing is essential when you are developing next-generation computer, consumer, or communication devices. The Keysight M8000 Series is the highly integrated BER test solution for physical layer characterization, validation, and compliance testing. With support for a wide range of data rates and standards, the M8000 Series provides accurate, reliable results that accelerate your insight into the performance margins of high-speed digital devices.

Product

KVS Rugged Igniter Tester With Current Monitor

4314

Tester

Valhalla Scientific Inc.

4314 - Valhalla Scientific Inc.

The Valhalla Scientific Model 4314 KVS Digital Igniter Tester is designed to provide extremely safe and reliable resistance testing of explosive or volatile devices.  Proven uses include fuses, squibs, igniters, explosive bolts, automobile airbag initiators and many others.

Product

Bit Error Rate Tester - PXI

BERT 1001/1005 Series

Tester

Quantifi Photonics Inc.

BERT 1001/1005 Series - Quantifi Photonics Inc.

The BERT is 2 or 4-channel PPG and Error Detector for the design, characterization and production of optical transceivers and opto-electrical components at data rates up to 30 Gb/s.With scalability and exceptional signal fidelity, it is a cost effective test solution for 400 Gb/s communication eco-systems.

Product

MTM-Bus Tester

PXIe-1149.5

BUS Tester

Corelis, Inc.

PXIe-1149.5 - Corelis, Inc.

The Corelis PXIe-1149.5 is a versatile, multi-mode instrument for interfacing with MTM-Bus modules. The PXIe-1149.5 adds MTM-Bus master, slave, and monitoring with full IEEE-1149.5 electrical and protocol compatibility with a standard PXIe interface for convenient integration into any Test Program Set (TPS).

Product

64 Gbaud High-performance BERT

M8040A

Bit Error Rate Tester (BERT)

Keysight Technologies

M8040A - Keysight Technologies

The Keysight M8040A is a highly integrated BERT for physical layer characterization and compliance testing. With support for PAM-4 and NRZ signals and data rates up to 64 Gbaud (corresponds to 128 Gbit/s) it covers all flavors of 200 and 400 GbE standards.

Product

120 GBd High-performance BERT

M8050A

Bit Error Rate Tester (BERT)

Keysight Technologies

M8050A - Keysight Technologies

The Keysight M8050A high-performance bit error ratio tester (BERT) enables accurate characterization of receivers used in next-generation data center networks and server interfaces. With uncompromised signal integrity, support for NRZ, PAM4, PAM6, and PAM8 signals, and data rates up to 120 GBd, the flexible architecture of the M8050A supports 1.6T pathfinding as well as other leading-edge technologies.

Product

Error Detector Remote Head 32 and 17 Gb/s

N4952A

Bit Error Rate Tester (BERT)

Keysight Technologies

N4952A - Keysight Technologies

The N4952A is an affordable and compact error detector remote head available in 4 to 17 Gb/s and 5 to 32 Gb/s configurations. Compatible with the N4960A Serial BERT controller, it is the perfect solution to test up to 32 Gb/s per channel for 100 Gigabit Ethernet applications and other high-data rate devices. The N4952A error detector supports PRBS or user patterns and operates up to 32 Gb/s in a single band with no gaps or missing data rates. The remote head allows the test equipment to be located very close to the device under test, eliminating the need for long cables that degrade signal quality.

Product

Open/Short Tester for Reverse Engineering Applications

Panther 2K-CT

Tester

Qmax Test Technologies Pvt. Ltd.

Panther 2K-CT - Qmax Test Technologies Pvt. Ltd.

Panther 2K-CT is a versatile open\Short tester designed especially for reverse engineering application of tracing circuits of undocumented PCBA’s.Its innovative measurement technology helps tracing PCB tracks between components in a given circuit board. It can accommodate various types of clips\grabbers and connectors to access the device pins to trace the connectivity. Its user friendly software guides the user to place and move cluster of IC clips and probes to learn the connectivity and to generate netlist.

Product

Automated Coherent Receiver Tester

CoRx Tester.

Receiver Tester

Quantifi Photonics Inc.

CoRx Tester. - Quantifi Photonics Inc.

Quantifi Photonics’ CoRx Tester provides automated measurement of key coherent receiver performance parameters. The CoRx Tester is comprised of a pre-configured PXI chassis, a two-channel tunable laser, a polarization controller, and a two-channel Variable Optical Attenuator (VOA) with built-in power meter. Just connect the two optical outputs to your Integrated Coherent Receiver (ICR), connect your ICR to the oscilloscope and let the CoRx Tester software do all the rest.

Product

MXE EMI Test Receiver, 3 Hz to 44 GHz

N9038B

Receiver Tester

Keysight Technologies

N9038B - Keysight Technologies

The Keysight N9038B is a standards-compliant MXE EMI test receiver and diagnostic signal analyzer built on an upgradeable platform. You choose the frequency coverage you need to fully test devices with outstanding accuracy and sensitivity across required ranges.