Code Analysis
-
Product
Impact Analysis
MetaDex™
-
Allows you to instantly see the impact of any changing data object or application on all downstream objects and applications.
-
Product
Individual UPC Bar Code Standards
-
The UPC Verification Calibration standards are a unique set of symbols that assures an exact and reliable primary bar code standard exists for UPC codes based on ANSI X3.182/ISO 15416 methodology. These standards assures that manufactures of verification equipment, scanners, QC labs and end users now have an accurate basis for checking the measurement capabilities of their equipment. These standards are intended as a fundamental calibration tool for an QC program, providing a continuous scale from best to worse case characteristics of each parameter. With complete NIST traceable data supplied, it is ideally suited to those requiring traceability, such as ISO certification. Each symbol is individually calibrated to ANSI X3.182/ISO 15416 standards using a custom built microdensitometer. These cards are supplied calibrated for use with a 6 mil scan aperture and 660nm wavelength. (calibration wit other aperture sizes or wavelengths is available)
-
Product
Gas Analysis
Si-CA 030
-
The Si-CA 030 offers everything heating engineers need to inspect and maintain residential and commercial boilers, with wireless connection to our smartphone app and automatic generation of servicing reports and certificates.
-
Product
Protocol Analysis
-
GL's protocol analyzer provides monitoring a communication link in accordance with industry protocol standards by non-intrusively tapping the network under test. The simple framework of the protocol analysis software helps you easily identify the improper sequence of protocol messages, and filter out frames causing the protocol violation.
-
Product
Corrosion Analysis
Resipod
-
Resipod is a fully integrated 4-point Wenner probe, designed to measure the electrical resistivity of concrete in a completely non-destructive test. It is the most accurate instrument available, extremely fast and stable and packaged in a robust, waterproof housing designed to operate in a demanding site environment. The Resipod is the successor of the classic CNS Farnell Resistivity Meter.Surface resistivity measurement provides extremely useful information about the state of a concrete structure. Not only has it been proven to be directly linked to the likelihood of corrosion and the corrosion rate, recent studies have shown that there is a direct correlation between resistivity and chloride diffusion rate and even to determination of early compressive strength. This makes it one of the most versatile NDT methods for concrete.
-
Product
Analysis Software
-
Analysis software that can streamline how you collect, analyse and report your bat call data.
-
Product
Signal Analysis
Histograph
-
The Histograph software is used for statistical signal analysis: finding the statistical values characterizing the signal and building the theoretic histograms based on the data obtained.
-
Product
HEAVY-DUTY CODE READER
MDBSCHD240
-
*Color display*Rugged enclosure for durability*Global OBDII quick test*Gasoline and diesel engine coverage*Read and clear diagnostic trouble codes*On-screen text in Spanish, French and English*On-screen definitions of diagnostic trouble codes*Set measurement units in SAE English/Metric*Internet upgradeable
-
Product
MILLENNIUM HEAVY-DUTY PRO CODE READER
MDM90HD
-
*Read and clear DTCs; read I/M readiness, data stream, freeze frame, O2 sensor info, on-board monitoring, vehicle information on (1996 and newer OBDII protocols based) vehicles*Read and clear DTCs; read data stream on heavy-duty (J1587, J1708, J1939, J1939/13 protocol based) vehicles*Supports 4 PIDs graphing at the same time
-
Product
Source to Object Code Analyser
RTT-STO
-
Verified Systems International GMBH
RTT-STO is a software analysis tool-suite that automatically performs static program analyses of C code and assembly required to receive certification credit for source-to-object code validation in the context of safety-critical avionics software.
-
Product
Automated System for Identification and Control of Pharmaceutical Codes
-
The automated system for identifying pharmaceutical codes includes two scanners of the pharmaceutical code, two sensors for the presence of an object and a data processing unit (BOD). When the box or instructions are passed under the object presence sensors, the farm code is read by the corresponding scanner and the results are transmitted to the computer via the Ethernet interface. The BOD verifies the correctness of the read out farm code by comparing this code with the reference farm code set at the beginning of the system operation. If the farm code has not been read or does not match the standard, the packaging machine stops and the type of error is displayed on the indicators.
-
Product
XRF Analysis
-
Elemental analysis (Be-U) from sub-ppm to 100% in solids, powders or liquids, X-ray Fluorescence.
-
Product
Quantitative Analysis Program
AutoQuant Pro
-
AutoQuant Pro is a powerful new automated, multi-component, quantitative analysis program for analyzing gas phase mixtures in real time. The program provides a comfortable user interface for operating a MIDAC FTIR analyzer, defining analytical methods for computing concentrations of compounds, displaying and outputting results, and automating data collection for multiple sample stream installations.
-
Product
Multi-omics Analysis Package
-
The Multi-omics Analysis Package, developed for metabolic engineering applications, provides the ability to automatically generate metabolic maps and perform a variety of data analysis for the vast data generated in fields like metabolomics, proteomics and flux analysis. It offers a powerful platform to support drug discovery, bioengineering and other life science research applications.
-
Product
Network Forensic Analysis
nChronos
-
nChronos is a Network Forensic Analysis Application for high performance & critical enterprise networks. It combines nChronos Console and nChronos Server to deliver the capability of 7*24 continuous packet capturing, unlimited data storage, efficient data mining and in depth traffic analysis.
-
Product
Signal Analysis
Super-Resolution Spectrum
-
Super-resolution Spectrum is used for spectral signal analysis with high frequency resolution. The program is used in diagnostics and monitoring systems of buildings and for analyzing non-stationary signals. The Software enables solving the following tasks:
-
Product
Analysis Tool
CANalarm
-
The CANalarm is a low priced analysis tool that can be installed in the bus permanently. It makes it possible to build up a separate and redundant monitor without change of configuration and program of the master controller. It works passive and is therefore non reactive
-
Product
Gas Analysis
HPR-20 S1000
-
The Hiden HPR-20 S1000 gas analysis system configured for continuous analysis of gases and vapours at pressures near atmosphere in standard form, alternative systems being offered for applications requiring direct sampling from higher pressures to 30 bar.
-
Product
Analysis
-
External appearance due to non-destructive semiconductor · X-ray fluoroscopic observation, SAT observation, electrical operation confirmation, ESD fracture analysis, plastic opening observation of Chip, search for abnormal portions by EMS / OBIRCH, package (PKG) analysis, Please do not hesitate to contact us anything related to semiconductor analysis, such as observation by polishing / parallel polishing (ball and bump observation etc.), peeling observation of defective part, analysis of foreign matter by EDX · FT - IR etc.
-
Product
Signal Analysis
Harmonic Distortion Analysis
-
The software is used for automatic measurement of the harmonic distortion factor and voltage r.m.s. of signals coming to the input channels of FFT spectrum analyzers. Adjustment to the frequency of the main component is performed automatically. The program is based on the measurement of the voltage r.m.s. of higher components by an external or internal reference signal.
-
Product
Data Analysis Software
APP ClearView
-
APP ClearView™ is the ideal data analysis software for engineeres and managers that need system information and answers quickly. It has a wide varity of graphics, math functions, reports, and file manipultion features that allow the user to easily navigate through their data. It supportsimporting of indisustry standrad formats such as COMTRADE (Common Data Transient Data Exchange) version 1996, 1997, and 1999.
-
Product
Signal Analysis Software
-
Signal analysis software solutions support a wide spectrum of applications ranging from manual signal processing and individual signal analysis to fully automated signal recognition and processing in wideband scenarios. The products are available as standalone units or as integrable subsystem solutions for R&S COMINT system software or third-party system software.
-
Product
Source Code Review
-
If code is legacy and massy and application is not performing well enough ,want to optimize your application internal structure.
-
Product
Trace Sulfur Analysis
-
Some sulfur compounds are known to be not only hazardous but also catalytic poisons. ppb sulfur analysis is conducted by gas chromatography. The Nexis SCD-2030 is a next-generation sulfur chemiluminescence detection system. The dramatically enhanced sensitivity and reliability, the excellent maintainability, and the automation functions, a first for the industry, will improve laboratory productivity.
-
Product
Surface Analysis
-
Bruker Nano Surfaces provides industry-leading surface analysis instruments for the research and production environment. Our broad range of 2D and 3D surface profiler solutions supply the specific information needed to answer R&D, QA/QC, and surface measurement questions with speed, accuracy, and ease. Bruker’s AFMs are enabling scientists around the world to make discoveries and advance their understanding of materials and biological systems. Our tribometers and mechanical testers deliver practical data used to help improve development of materials and tribological systems.
-
Product
Surface Analysis
-
A UHV surface analysis system for thin film depth profilingMeasures the surface composition of the first few nanometers and/or micrometers depth of solid samples.
-
Product
Code Verification Systems for Machine-Readable Barcodes
-
Nearly all products in today´s world provide coded information. Manufacturer data, product IDs, prices, item numbers and so on are translated into machine-readable barcodes. This information needs to be read at supermarket checkouts and at many places in operational goods logistics in an error-free, fast and reliable manner.
-
Product
Signal Analysis
Cross-Correlation Analysis
-
The software is used for correlation analysis of signals coming from the input channels of FFT spectrum analyzers in real time or recorded time realization view mode, as well as for viewing various correlation characteristics of signals. Correlation analysis is a set of methods based on the mathematical correlation theory and is used for detecting the correlation dependence between two random attributes or factors. For solving a number of diagnostic tasks, cross-correlation analysis of signals in two or more control points distributed across space is often used.
-
Product
Power Analysis Software
PAS
-
PAS is SATEC's comprehensive analysis and engineering software designed to program and monitor all SATEC devices. It includes a variety of additional tools to assist in system setup, such as the communication debugging module.





























