Product

USB-C® Tx & Long Chnnel Rx Precet. Test Fixture

AUT20044 Rev:B0

-

Allion

AUT20044 Rev:B0 - Allion

The original Intel USB-C 3.1 Tx Test Fixtures includes two types of fixtures, UFP and DPF. Allion Pre-Cert Test Fixture integrates functions of the two fixtures into an one-board solution, eliminating the hassel to frequent switching of two fixtures.

Product

RF Functional Test Fixtures

-

EMC Technologies Inc.

EMC Technologies Inc.

EMC Technologies’ design team has developed a variety of test adaptors and test stations for testing RF circuit assemblies and microwave sub-assemblies.

Product

Fiber Optic Light Source

-

Huihong Fiber Inc

Huihong Fiber Inc

Fiber optic light source is a fiber optic test equipment to measure the fiber optic loss for both single mode fiber cable and multimode fiber cables; usually the fiber optic light source is used with the fiber optic power meters. This fiber optical light source can provide wavelength output according to the specific requirements including the 650nm red source, 1310nm/1550nm wavelength for the single mode fiber and 850nm/1300nm wavelength for the multimode fiber. Used together with our fiber optic power meter, they act as an economic and efficient solution for the fiber optic network works.

Product

Light Source

LS-HA

-

OtO Photonics Inc.

LS-HA - OtO Photonics Inc.

provides the stable and smooth wide-band spectral output. It’s proper for most visible to near infrared range measurement. This light source is also designed to be used in the standard measurement package. It ‘s a simple and quick measurement platform.

Product

Handheld Optical Light Source

X5002

-

Shinho Optics Limited

X5002 - Shinho Optics Limited

Optical Light Source X-5002 is new-type light source. It provides single to quad-wavelength output including 650nm visible light source and 850/1300nm wavelength for multi-mode fiber or 1310/1550 nm dual-wavelength for single mode fiber. Together with new-type power meter, they combine the accurate test solution for the optical fiber networks.

Product

Mode-Conditioned Light Sources

-

Thorlabs, Inc.

Thorlabs, Inc.

Thorlabs' Mode-Conditioned Light Sources are fiber-coupled LED sources that have an output with a flat-top profile in the far field. Common applications include the testing of multimode fused fiber components as well as verification of modal behavior in fiber-based setups. Standard fiber-coupled LED sources can have a range of output profiles that are usually not uniform and vary from source to source. This can be dependent on emitter orientation, alignment with fiber tip, and connector assembly. These mode-conditioned sources have been engineered to distribute light evenly into all transverse modes, resulting in an equilibrium modal distribution at the output. The front panel includes an adjustment knob to control the power and an output port that accepts 2.2 mm wide-key FC/PC connectors. A DS15 15 V power supply with a location-specific plug is included with each device.

Product

Lamp-Based Calibration Light Sources

-

Gamma Scientific Inc.

Gamma Scientific Inc.

Lamp-based calibration light sources from Gamma Scientific are used for optical calibration of light measurement instruments including spectroradiometers, photometers and radiometers. All of our calibration light sources meet rigid quality standards for use in the most challenging testing environments. A wide range of light sources is available to serve as precision standards of radiant flux and white-light standards of spectral irradiance or luminance.

Product

Forensic Light Source

Mini-CrimeScope Advance

-

HORIBA, Ltd.

Mini-CrimeScope Advance - HORIBA, Ltd.

The Mini-CrimeScope Advance builds on the knowledge and expertise of more than 20 years of Forensic Light Source design. It incorporates the same ease of use and unmatched reliability of its predecessor, along with the latest in arc lamp technology. The result – a unit that is unsurpassed in performance.

Product

Through Connector Functional Test Fixtures

-

Circuit Check, Inc.

Circuit Check, Inc.

Circuit Check is a pioneer in the development and implementation of access mechanisms enabling testing of circuits through on-board connectors.

Product

Light Meter

DL1076

-

Pacer Instruments

DL1076 - Pacer Instruments

Switchable between LUX and FC (footcandles). Auto-ranging. Auto-zero at turn-on. Display hold function. Analog output (2 VDC F.S.)

Product

Monochromatic, Fiber-Coupled LED Light Sources

-

lightsource.tech GmbH

lightsource.tech GmbH

LED light sources in the LS-MC1 series provide a constantly growing selection – currently amounting to over 20 – of narrow band single wavelength LEDs with a bandwidth of 15-50 nm FWHM, allowing precise work in a defined wavelength range. As a result of optimized optical coupling into the optical fiber – as with all of our light sources – with our LS-MC1 series we have achieved the highest possible luminance. The advantage of directly emitting monochromatic LEDs is their very high level of efficiency, because the entire radiated output is in the useful wavelength range.

Product

Sound and Light Controlled Environment

SmartChamber

-

Metris B.V.

SmartChamber - Metris B.V.

SmartChamber provides a sound isolated, ventilated and light controlled environment to perform high performance ultrasonic vocalization experiments. The chamber can be provided with a built-in Sonotrack ultrasonic microphone and has an interior which effectively removes sound echo's, external noise and sounds and magnetic fields. SmartChamber can be seamlessly integrated with our product Sonotrack

Product

Uniform Light Sources

-

SphereOptics GmbH

SphereOptics GmbH

It includes universal mounting points and wireless light controls. It is offered with a variety of color temperatures as well as near-infrared.

Product

Light Meters For Horticulture (PAR, UV And NIR)

-

Gigahertz-Optik GmbH

Gigahertz-Optik GmbH

Light meters for measuring horticultural lighting in terms of PAR, UV and NIR irradiance.

Product

Monochromatic High Power LED Light Sources

LS-HP1 Series

-

lightsource.tech GmbH

LS-HP1 Series - lightsource.tech GmbH

The LS-HP1 is a series of high-power, high brightness light sources for liquid light guides (LLG). It is characterized by its outstanding luminance and thus delivers very high light output from liquid light guides. The LS-HP1 works with the latest generation of high-power LEDs with up to 100W power from an area of less than 15mm². With the LS-HP1 series, we achieve the highest luminance levels through optimized optical coupling into the liquid light guide without heating it up too much. The LS-HP1 is available for liquid light guides with core diameters of 3 or 5mm.

Product

Length Gauges For Measuring Stations And Multi-gauging Fixtures

METRO series

-

Heidenhain Corp.

METRO series - Heidenhain Corp.

*High repeatability*Very high system accuracy of down to: ±0.2 µm*Ball-bearing-guided and zero-backlash plunger*Variant with reduced gauging force*Very long measuring ranges of up to 100 mm*Interfaces: 1 VPP, TTL, 11 µAPP*Protection rating of up to IP67

Product

LIGHT RANGER MUTT

TT9103

-

Matco Tools

TT9103 - Matco Tools

*Portable and water resistant trailer light tester and trailer brakes tester that allows the user to perform all testing functions without the use of the vehicle*Tests 7-spade, 6-round and 4/5-flat pin type trailer harnesses*Short circuit protection*Turn signal simulation and power verification LED*Water resistant*Trickle charger and trailer plug adapter includedInternal battery compartment (battery not included)

Product

Light Curtains

-

Leuze electronic GmbH + Co. KG

Leuze electronic GmbH + Co. KG

Switching light curtains are perfect for monitoring large measurement fields. They react as soon as anything or anyone penetrates this field. Their fast configuration and simple handling save time and money compared to imaging processes. Thanks to different beam spacings and measurement field lengths, switching light curtains can be used to solve a range of application problems.

Product

ICT/FCT-Fixtures, Max UUT 370 × 300 mm (wxd)

CK-2-228X (Small IF) / 230540

-

Columbia Elektronik AB

CK-2-228X (Small IF) / 230540 - Columbia Elektronik AB

The series of In-Circuit testers that are Teradyne for the 228x and TestStation are dedicated tools that rely on the tester hardware for diagnostics and test pattern delivery. The integration of the stand-alone BTS with the Teradyne ICT can enhance the system’s capability. In other words, it can provide access to additional tools. It provides the user with a common platform and portability of test patterns from stand-alone to ICT and later on to functional test and depot test stations.