Product

High Coil Resistance Reed Relays

Series 118

-

Pickering Electronics

Series 118 - Pickering Electronics

The Pickering Series 118 is a range of very sensitive reed relays that are ideal for portable electronic instruments or other applications where low power consumption and a very small footprint is important. They have 5 volt coils with a resistance up to 2200 Ohms and the option of an internal diode.

Product

Resistance Tester

METRISO® 3000

-

Wolfgang Warmbier GmbH & Co. KG

METRISO® 3000 - Wolfgang Warmbier GmbH & Co. KG

Suitable for resistance point-to-point and resistance to ground measurementsIntegrated data logger with USB communication port for data transmission (50.000 test values). The supplied Report Generating Software ETC allows to generate a complete test reportA barcode scanner can be used in order to record measurement points before testing

Product

Suitable For Temperature And Potentiometer Sensors

SEM1600T

-

Labfacility Ltd.

SEM1600T - Labfacility Ltd.

The SEM1600T accepts resistance or mV signals from RTD, Slidewire or Thermocouple sensors.

Product

PHOTOELECTRIC Sensor

PE2

-

Adtek

PE2 - Adtek

● Wide range power supply for AC24~260V and DC12~260V● A wealth of models ideal for limit control, counting control, and other applications.● Sensing distance of 30~300cm for Diffuse reflective models, 3M~8M for Retro reflective models and 10M~20M for Through beam models.● Housing by PBT with strong structure and acid resisting.

Product

Insulation Testers

-

Shenzhen Everbest Machinery Industry Co.,Ltd.

Shenzhen Everbest Machinery Industry Co.,Ltd.

The insulation resistance (IR) test (also commonly known as a Megger) is a spot insulation test which uses an applied DC voltage (typically either 250Vdc, 500Vdc or 1,000Vdc for low voltage equipment <600V and 2,500Vdc and 5,000Vdc for high voltage equipment) to measure insulation resistance.

Product

Rebar Corrosion Rate Determination System

Gecor 6

-

James Instruments Inc.

Gecor 6 - James Instruments Inc.

Measures the rate of corrosion and other parameters of rebars. The Gecor 6 utilizes the polarization resistance technique to establish the corrosion rate. This is a quantitative measure of the amount of steel oxidizing at the time of measurement. Up to 100 readings can be stored in memory for later uploading to a Personal Computer.

Product

HV High Performance Circuit Breaker Analyzer

CBV-19

-

Zensol Automation Inc.

CBV-19 - Zensol Automation Inc.

We conceived the CBV-19 to provide the best range of testing for electrical facilities such as circuit breakers (using gaz, oil, air, vacuum…) or synchronous condensers all the way up to 800kV and more. It combines Timing, Motion, Dynamic Resistance Measurements, and Vibration, all in a single test.

Product

5lb Conductive Rubber Electrode

PRS-801W

-

Prostat Corporation

PRS-801W - Prostat Corporation

Probe to test resistance of floors, worksurfaces, floor mats, or other flat objects.

Product

Software-controlled Generator

IPTN16

-

Holding Informtest

IPTN16 - Holding Informtest

*The module provides output of constant stabilized voltage through 16 independent channels in 2 ranges ± 2 V and ± 10 V with a step of 5 mV, as well as a stabilized current of ± 10 mA with a step of 5 μA.The IPTN16 module is intended for use in information measuring VXI systems and can be used to power resistive temperature sensors or strain gauges with voltage or current with an accurate and stable value.*The IPTN16 module can also be used to simulate voltage or current sensors when checking measuring instruments and channels of measuring systems.

Product

Load cell simulator

PC2M

-

Vetek Weighing AB

PC2M - Vetek Weighing AB

PC2M signal calibrator has been realised to perform periodicalchecks and calibrations on indicators with a 2mV/V input anda 4 or 6 wires systems. Provided with a main switch with 6 selectable steps, it allows to control the linearity on both positive and negative field. Internally, the 350W full bridge unbalancing, is generated by high stability passive resistances (1 ppm/C).

Product

Microohmmeter

MMR-6500

-

Sonel S.A.

MMR-6500 - Sonel S.A.

The MMR-6500 digital meter is designed for measuring low resistances with a stabilised current of up to 100 A. The use of test clamps enables the safe measurement of breakers (high-, medium- and lowvoltage), isolators and other components earthed on both sides. The MMR-6500 series meters are equipped with a unique module in their class that measures inductive components which have a current of up to 10 A, enabling the winding resistance of motors, transformers and other inductive components to be measured. Another useful function is the temperature measurement and the automatic compensation of results with relation to the measured temperature or temperature set by the user. The system is completed with a recorder function. Special measuring algorithms and additional functions allow an appropriate measuring method to be chosen depending on the measured component and measurement conditions, thus, widening the application areas of the meter. The state-of-the-art user interface, various communication interfaces, wireless communication and communication with the computer, printer, 2D code reader are integrals features which enable full, comfortable and intuitive management of not only measurements and their results but also ID data of measured components.

Product

Earthing Resistance Tester

JYD-10A

-

Kingrun Instrument Co., Ltd.

JYD-10A - Kingrun Instrument Co., Ltd.

transformer neutral grounding resistor is the vital need in medium voltage AC distribution network that are also called by different names like Neutral Earthling Resistors. They are taken into use to limit the current that would flow through the neutral point of a transformer or generator in the event of an earth fault. They are also used for resistance grounding of connected generators and transformers.

Product

Digital Multimeter and Phase Rotation Tester

3000 MPR

-

Standard Electric Works Co., Ltd

3000 MPR - Standard Electric Works Co., Ltd

● 4000-count LCD● Auto ranging● Voltage, Resistance, Current, Continuity, Diode measurement● Can measure Resistance up to 200.0 Mohm● Checks a wide range of 3-phase power sources (80~750VAC)● Phase Rotation indication : clockwise and counter-clockwise on LCD● The LCD will show AC voltage between phases and Phase Rotation● Wide range for capacitance test: 0~40000μF(40.00mF)● REL / Auto-Zero function● MAX /MIN function● VAHz function● Frequency : 40.00 MHz● Data hold function● Over range indication● Low battery detection● Auto power off in 15 minutes● Convenient stand for viewing● Comply with EN 61010-1, CAT III 600V for the range of 600V AC/DC

Product

Ozone Aging Test Chambers

-

Dongguan Amade Instruments Technology Co., Ltd

Dongguan Amade Instruments Technology Co., Ltd

Ozone aging test chamber is also called as ozone climate simulator or ozone aging tester. It is one of climatic testing instruments, which is to simulate and intensify the ozone condition for determining the cracking resistance of vulcanized or thermoplastic rubbers when subjected to dynamic or static tensile strain exposed at a man-made constant temperature to atmosphere containing given concentration of ozone in conformance with relevant specification. Ozone test is an indispensable method for people to research effects and mechanisms of ozone on rubbers, quick identify and evaluate anti-aging performance of rubbers and find solutions for improvement of quality and lifespan.

Product

Semiconductor

-

KITA Manufacturing Co.,Ltd.

KITA Manufacturing Co.,Ltd.

You can find Spring probes used for test process for production of semiconductor here. Spring probe is probe with spring inside and is also called Double-ended probe and Contact probe. It is assembled in IC socket and becomes electronic path, which vertically connects Semiconductor and PCB. By our excellent machining technique, we can provide spring probe with low contact resistance and long life. “MARATHON” series is our standard lineup of spring probe for testing semiconductor.

Product

Near Field Probes 30 MHz up to 3 GHz

RF1 set

-

Langer EMV-Technik GmbH

RF1 set - Langer EMV-Technik GmbH

The RF1 near field probe set consists of 4 passive near field probes for making measurements in the development phase of E-field and magnetic field in the ranges of 30 MHz to 3 GHz on electronic assemblies. The probe heads of the RF1 set allow for measurements close to the electronic assemblies, e.g. on single IC pins, conducting paths, components and their connectors in order to localize interference sources. Field orientation and field distribution on an electronic assembly can be detected through a trained special use of the near field probe. The near field probes are small and handy. They have a sheath current attenuation and are electrically shielded. They can be connected to a spectrum analyzer or an oscilloscope with a 50 Ω input. They do not have an internal terminating resistance.

Product

Megger Tester

-

Shenzhen UYIGAO Electronic Technology Co., Ltd

Shenzhen UYIGAO Electronic Technology Co., Ltd

Megger is an instrument which in addition to measurement of high resistance can be used to test the quality of the insulation.

Product

Battery Monitoring System

BDS-Pro

-

Eagle Eye Power Solutions

BDS-Pro - Eagle Eye Power Solutions

Eagle Eye's BDS-Pro Battery Monitoring System is designed to measure the aging status of up to 24 jars (or 24 cells) by measuring and recording: string voltage and current, as well as jar/cell voltage, internal resistance, connection resistance and temperature. The BDS-Pro Battery Monitoring Solution is the most accurate, user-friendly and economic solution for monitoring 24 jars (or 24 cells) systems using 1.0-16V batteries. Although the BDS-Pro is utilized in many industries, it is most frequently used in 24 cell, 48Vdc applications.