Product

Balanced Photo-Receivers

-

Optoplex Corporation

Optoplex Corporation

Coherent detection has been found increasing applications in fiber sensing as well as in conventional RF and optical communications. In the past several years, coherent technology has been advanced dramatically in high-speed optical communications. With this, key parts and components (such as narrow linewidth lasers, optical hybrid, balanced photo-receivers and DSP, etc.) are commercially available and cost-effective for many applications beyond telecommunications.

Product

Digital Interface

DNTBOB-88

-

Lectrosonics, Inc.

DNTBOB-88 - Lectrosonics, Inc.

BOB 88 is a high quality, general purpose interface to transmit and receive line level analog audio signals via a Dante network. Analog inputs are converted to digital and appear on the network as transmit channels. Audio for the analog outputs is taken from subscriptions to transmit channels on the network from other sources. When connected to a network, each break out box will appear as a separate device in the Dante Controller software interface.

Product

Tx/Rx BenchBlade

-

F9 Systems, Inc.

F9 Systems, Inc.

This ATCA compatible test card offers the flexibility to verify the performance of Advanced TCA fabric and base channels. The set of four Transmit pairs and four Receive pairs allows access to a full channel's eight pairs for logic card characterization. The card includes a HM-ZD male right angle connector segment for access to the Zone 2 connectors of a switch fabric or node card. Edge-launch SMA connectors are utilized for ease of test cable attachment. SMT pads are included on the receive pairs.

Product

Frequency Hopping Spread Spectrum

FHSS

-

Futaba

FHSS - Futaba

Futaba introduced FHSS (Frequency Hopping Spread Spectrum) systems in 2010, to offer modelers a less expensive way to enjoy 2.4GHz dependability. Other advantages include extremely low latency, exceptionally fast frame rates, transmitters with no external antennas and low-cost receivers with Easy Link convenience.As the name implies, the transmitter signal of an FHSS system literally hops from frequency to frequency in a pseudorandom sequence. The combination of frequency hopping with Futaba's advanced algorithms creates 100% frequency security.

Product

3.6 GS/sec Ultra Wideband RF/IF Extreme 1/2 ATR Recorder

Talon RTX 2589

-

Mercury

Talon RTX 2589 - Mercury

- Rugged 1/2 ATR MIL-spec chassis- Designed for harsh mechanical and thermal environments- Environmentally sealed- Internally conduction-cooled- Fully sealed for RF emissions with EMI power line filter- MIL-STD circular connectors- Compact and lightweight design - 22 lb (10kg)- Ideal for UAVs, military vehicles, aircraft pods and outdoor environments- Capable of recording RF/IF frequencies to 2.8 GHz- Ultra Wideband recording with 3.6 GHz 12-bit A/D- Selectable 1.8 GHz dual channel mode- Up to 61 TB of solid state storage in removable QuickPac- Sustained real-time record rates up to 4 GB/s- 12 to 28 VDC power supply- Optional GPS receiver for precise time and position stamping- SystemFlow API, GUI and Signal Viewer analysis tools- Optional telnet remote connection to recorder

Product

Terahertz Synthesizer 0.45 THz to 2.85 THz

-

Insight Product Company

Insight Product Company

Advantages: -Significant output power -Extremely stable frequency -Wide tunability -Wide possibility of frequency and amplitude modulation and manipulation, -Convenient for heterodyne and direct detection receiver systems -Ease of control and operation -High reliability

Product

MIPI C-PHY Receiver Conformance Test Software

N5991MC2A

-

Keysight Technologies

N5991MC2A - Keysight Technologies

Maximize the usage of your test instruments with a fast and reliable application to automate system calibration and C-PHY 2.0 receiver conformance tests.

Product

Cable Assemblies - Receiver

-

Virginia Panel Corporation

Virginia Panel Corporation

VPC has a large number of pre-configured cable assembly solutions to meet a variety of interface needs. TriPaddleQuadraPaddleMini/Micro CoaxOther

Product

VHF/UHF Digital RF WATT/VSWR Meter

PMR 3030

-

LBA Group, Inc

PMR 3030 - LBA Group, Inc

The PMR 3030 EXT Power Meter is a very versatile instrument covering communication bands from 30-1000 MHz. (The PMR 3030 is available for 30-500 MHz only. The PMR Power Meter is capable of measuring forward and reflected power in the range of a few milliwatts up to 500 Watts. The internal operating system controls measurement, display and the I/Os allowing serial communication to PC, USB to memory stick and USB Serial communication. The I/O options are used to write plots to either memory sticks or to a connected PC, the I/Os can also be used to operate the instrument, giving commands and receiving data. For documentation reference the instrument has a real time clock. Multilayer menus are used to setup and control the operation of parameters.

Product

HDMI Extender via One SC Multimode Fiber Optic Cable to 3,280 feet

ST-FOHD-SC50

-

Network Technologies Inc

ST-FOHD-SC50 - Network Technologies Inc

The XTENDEX® HDMI Extender via Fiber Optic Cable locates an HDMI display up to 3,280 feet (1,000 meters) away from a video source using a single SC multimode fiber optic strand. Each extender consists of a transmitter that connects to a video source and a receiver that connects to a display.

Product

High Speed Optical Receiver Modules

-

Macom Technology Solutions Holdings Inc.

Macom Technology Solutions Holdings Inc.

Macom High Speed Optical Receiver Modules

Product

Ground Fault Locator

DC Trace

-

Scope T&M Pvt, Ltd.

DC Trace - Scope T&M Pvt, Ltd.

SCOPE introduces DC Trace, the most advanced and user friendly DC Earth (Ground) Fault Locator. This portable instrument consisting of Signal Generator & Signal Receiver (DC TraceR) uses latest digital signal processing technology. It’s ability to detect earth faults in live DC system quickly & accurately in online condition greatly relieves the substation maintenance engineers from nightmare of earth leakages & it’s detection.

Product

PCI To PCI Express Board

MS 1718

-

Meltronics Systemtech

MS 1718 - Meltronics Systemtech

PCI to PCI Express card is used to extend PCI / PCI-X bus from one PCI system to another system over an optical fiber medium up to 500meters or over a copper medium up to 7 meters using a PCI express interface. This card receives/transmit PCI signals from/to the Host System. These PCI signals are converted into PCI Express using PCI / PCI-x to PCI Express cross bridge and vice versa. The PCI Express signal is transmitted / received through the optical interface or copper interface.

Product

Indoor Mini Optical Receiver

SR1020

-

Hangzhou Softel Optic Co., Ltd.

SR1020 - Hangzhou Softel Optic Co., Ltd.

Designed for FTTH(Fiber To The Home) networks ●Excellent linearity and flatness●Wide range of optical input power ●Single-mode fiber high return loss ●Using GaAs amplifier active devices ●Ultra low noise technology ●Smaller size and easier install ●Red-LED for power indication ●Color-LED for optical power indication●Double color LED for optical power indication (Non-lighted: optical power<-10dBm, Green:-10dBm+3dBm)

Product

Pulse Radar Reference Test Solution

-

Guzik Technical Enterprises

Guzik Technical Enterprises

Compact Reference Solution with ADP7104, M8195A, WR15CCU, WR15CCD, N5183B combines commercial off-the-shelf COTS modular hardware and software from Guzik, Keysight Technologies, KJ Microwave and Virginia Diodes, which provides a flexible testbed for radar waveform generation and analysis. Generate and analyze pulse radar waveforms. Pre-correct waveforms for overall channel response. Supports many topologies for radar transmitter / receiver testing (IQ, IF, RF, microwave, millimeter-wave).

Product

RS-422 RS-423 RS-485

-

STMicroelectronics

STMicroelectronics

The low-power, high-speed transceivers of this family are designed for RS-485, RS-422 and RS-423 communication applications. They usually contain one driver and one receiver in half duplex configuration. Each driver output and receiver input is protected against electrostatic discharge up to ± 15 kV and has no latch-up. These transceivers operate with a 5 V supply and draw a very low supply current when unloaded or fully loaded but with disabled drivers.

Product

Radar Front Ends

FMCW

-

Farran Technology Ltd

FMCW - Farran Technology Ltd

The transmit signal is derived from an external VCO signal, internally multiplied, which also acts as the LO for the receive mixer. The resulting IF is conditioned for gain and filtering as required. The IF also contains an industry leading IF noise figure, especially in the frequency range below 500MHz. Custom designs available, visit our custom design page for more information.