Product

Current Transformer Testers

-

Vanguard Instruments Company, Inc.

Vanguard Instruments Company, Inc.

Performs CT excitation, current-ratio, polarity, and phase angle testsMeasures insulation resistance and winding resistance of the CT seconday windingsMeasures the CT's secondary burdenTest record header information including company, substation name, circuit ID, manufacturer, CT serial number, operator name, and test record-commentsBuilt-in 4.5-inch wide thermal printerPlot Multiple Saturation CurvesStores up to 128 CT test plans and 140 test records internallyUSB, Bluetooth, and USB Flash drive interface

Product

Clamp type AC Current Sensor／with DC Voltage Output

ACT-50H

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

ACT-50H - MULTI MEASURING INSTRUMENTS Co., Ltd.

*For current measurements of the control board*AC 1A～50A*DC 5V full scale output

Product

Clamp type AC Current Sensor／for Load Current Measurements(CT Series)

CT-33

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

CT-33 - MULTI MEASURING INSTRUMENTS Co., Ltd.

*Compact size*AC 1A～200A*Current measurements of feeder

Product

Clamp type AC Current Sensor／for Leakage Current Measurements(ZCT Series)

ZCT-1100

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

ZCT-1100 - MULTI MEASURING INSTRUMENTS Co., Ltd.

*Leakage current measurements of main cable*Ultra big CT window*AC 1mA～30A : 3080turns*AC 30A～3000A : 2000turns

Product

AC Current Probe 10 mV/A, 600A, 12 Hz LF Bandwidth, 30MHz HF Bandwidth, 1m cable

T3RC0600-HF

-

Teledyne LeCroy

T3RC0600-HF - Teledyne LeCroy

AC Current Probe 10 mV/A, 600A, 12 Hz LF Bandwidth, 30MHz HF Bandwidth, 1m cable.

Product

Eddy Current Test System

CIRCOGRAPH® Product Family

-

Foerster Instruments, Incorporated

CIRCOGRAPH® Product Family - Foerster Instruments, Incorporated

The CIRCOGRAPH eddy current test system with rotating probes guarantees maximum detection sensitivity for exposed longitudinal surface defects on bright material. The test system is primarily used for wire drawing machines, Cu tube rewinders, and finishing sections in the bright steel sector. The individually tailored test systems by FOERSTER can be fitted with rotating sensors or CIRCOSCAN rotating discs. They scan flat and profiled material, e.g. when testing rails and billets.

Product

AC Current Shunts

CSA Series

-

Ohm-Labs, Inc.

CSA Series - Ohm-Labs, Inc.

Ohm-Labs’ CSA series of ac current shunts are designed as laboratory standards for ac current measurement up to high frequencies.

Product

Eddy Current Data Acquisition Unit

MIZ-80iD

-

Zetec, Inc.

MIZ-80iD - Zetec, Inc.

The MIZ-80iD is an all-in-one integrated eddy current instrument, probe pusher, and control system that has transformed the way eddy current data is obtained.

Product

For Detecting Low Range And Leakage AC/DC/Pulsed Current.

FDAZCT-20LSP-0.6S

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

FDAZCT-20LSP-0.6S - MULTI MEASURING INSTRUMENTS Co., Ltd.

*Lowest Influence from Magnetization,Temperature *Change,Residual Current and Terrestrial Magnetism.*Low Cost and High Performance (Output Linearity ±1% F.S)

Product

SpikeSafe DC Current Sources

-

Vektrex Electronic Systems

Vektrex Electronic Systems

The Vektrex SpikeSafe DC Current Sources provide reliable drive for LED/laser diode reliability, IESNA LM-80 test, and other current-driven test applications. Models support currents from 500mA to 60A and compliance voltages from 50V to 400V. All models feature individual channel control, precise current, and high power density — typically 6.4kW-8kW.

Product

8 SE Or 4 Diff. Input Channels, 4 Analog Current Output Channels, PCI Express

APCIE-3121-8-4C

-

TEAM SOLUTIONS, INC.

APCIE-3121-8-4C - TEAM SOLUTIONS, INC.

Input range:?± 10 V, 0-10 V software programmable0-5 V, ± 5 V, 0-2 V, ± 2 V, 0-1 V, ± 1 V (gain)0-20 mA (option) ? software-programmable amplifier:PGA x1, x2, x5, x10 ? Conversion triggered through software,scan, timer, external event ? Onboard FIFO buffering for 256 analog values ? Data exchange through 16-bit I/Oor 32-bit memory (PCI DMA) ? Sequence RAM ? Overvoltage protection ? input filter: 160 kHz

Product

Bias Networks

-

Keysight Technologies

Keysight Technologies

RF and microwave bias networks are used in a wide variety of biasing applications for test and measurement requirements in laboratory and production environments. Bias networks provide the means of supplying DC bias to the center conductor of the coax connector for your device while blocking the DC to the RF ports.

Product

Current Injection Sets

-

AJIT Electronics Co.

AJIT Electronics Co.

Built in c based Time Interval Meter measuring from1 millisec to 9999 sec. Panel with easy and clear legends to read. Continuosly variable outputs. Auto Cut-off & output isolated. Self sensing of contacts i.e. NO or NC Potential free star stop signals Available in Portable / Lab type models with metal cover

Product

Current Probe

-

Vernier Software & Technology, LLC

Vernier Software & Technology, LLC

Simplify your experimental setup with the Go Direct Current Probe. It connects wirelessly via Bluetooth® or wired via USB to your device. The wireless connection eliminates additional cables that can clutter the lab bench. Capture small currents like those produced by a magnet falling through a coil.

Product

Stand-Alone Current Sensors

-

Aanderaa Data Instruments AS

Aanderaa Data Instruments AS

The Aanderaa Current Sensors are based on the backscatter acoustic Doppler principle.

Product

Non-destructive Eddy Current Testing of Long Products such as Tubes, Rods, Wire, and Profiles

DEFECTOMAT® Product Familiy

-

Foerster Instruments, Incorporated

DEFECTOMAT® Product Familiy - Foerster Instruments, Incorporated

The DEFECTOMAT systems by FOERSTER were specially developed for quality testing and process monitoring of long products. From hot testing to all bright steel processing steps, the surfaces of semi-finished products made from austenitic, (non) ferromagnetic metals can be tested for defects. The DEFECTOMAT systems operate in a contactless and non-destructive manner in accordance with the eddy current method and are used for detecting short defects, such as holes or localized defects and transverse defects. The systems detect defective materials fully automatically and reliably. Defects can be marked, classified, and automatically discarded. the test speed of up to 150 m/s facilitates 100% testing, even at high production speeds. The systems benefit from low operating costs and frugal energy consumption as well as low maintenance costs, few wear parts, and low use of materials.

Product

Clamp-On Type Earth Resistance Tester / Leakage Current Clampmeter

KM 1620 / KM 1720

-

Kusam Electrical Industries Limited

KM 1620 / KM 1720 - Kusam Electrical Industries Limited

KM-1620 / KM 1720 single-jaw type Earth Resistance Tester is widely used for earth resistance testing of the equipments in the field of power, telecommunication, as well as the other electrical equipments. It features easy operation, high-accuracy and good adaptation of testing environment.

Product

Current Measurements Of PWM Or Inverter, AC/DC 10～200A, Φ24mm

CTF-200DC-U24V

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

CTF-200DC-U24V - MULTI MEASURING INSTRUMENTS Co., Ltd.

*AC/DC 10～200A*Current measurements for PWM or inverter

Product

Current Caliper

KH23101

-

Beijing KeHuan Century EMC Technology Co,.LTD

KH23101 - Beijing KeHuan Century EMC Technology Co,.LTD

The KH23101 current caliper is a toroidal transformer used to measure EMI current. When measuring, the caliper does not directly touch the electrical conductor or the cable under test. The conductor passing through the caliper window is used as the single-turn primary wire of the transformer, and the secondary is designed to be multi-turn. Use with 50 Ω receiving system (such as EMI electromagnetic interference field strength meter or spectrum analyzer). In order to facilitate installation and rapid measurement of EMI current, it is designed as a caliper that can be opened.

Product

AC Current Probe 2 mV/A, 3,000A, 0.11 Hz LF Bandwidth, 6.5MHz HF Bandwidth, 4m cable, 300mm coil

T3RC3000-LF

-

Teledyne LeCroy

T3RC3000-LF - Teledyne LeCroy

AC Current Probe 2 mV/A, 3,000A, 0.11 Hz LF Bandwidth, 6.5MHz HF Bandwidth, 4m cable, 300mm coil.