Product

4 (High Current) D/A Outputs (±40 VDC or +100 mA)

DA3

-

North Atlantic Industries

DA3 - North Atlantic Industries

The DA3 module features 4 high-current D/A output channels with a full-scale range of ±40 VDC or ±100 mA (max). The DA3 provides either voltage or current control loop modes that are programmable for the particular application.

Product

Rogowski AC Current Probe

RCP500

-

Shenzhen Micsig Instruments Co., Ltd.

RCP500 - Shenzhen Micsig Instruments Co., Ltd.

Adopts the Rogowski coil current measurement system: within the range, the output signal of the system and the current signal to be measured are always linear, so the accuracy will not change with the current; The RCP500 measures AC current up to 500A pk, minimum to 200mA pk, with bandwidth ranging from 15Hz to 300KHz, 1% accuracy, and has less than 2mV noise. Directly powered by Micsig UPI interface, realise auto scaling setup,

Product

Precision Current Sources

-

Guildline Instruments Ltd

Guildline Instruments Ltd

DC Precision Current Sources provides precise and very stable output currents from 3 A to 10,000 A. The 6623A-PCS Series provides the best uncertainties of any DC high current sources (i.e. < 5 ppm of precision and stability at 1000A). In addition this Series is modular and initial output currents can be expanded at any time.

Product

Clamp type AC Current Sensor／for Power Monitor

ZCT-23

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

ZCT-23 - MULTI MEASURING INSTRUMENTS Co., Ltd.

*Compact size*AC 0.1A～120A*Current measurements of terminal feeder

Product

DC Bias

DU2020/2030/2040

-

Delta United Instrument Co., Ltd.

DU2020/2030/2040 - Delta United Instrument Co., Ltd.

Frequency: 10KHz - 200KHz Veracity:3% + 3 digitsTiming: 0.1 - 999 H, settable 3 1/2 bits LCD Display

Product

16-Channel VME Current Source & Analog Measurement Module

V460

-

Highland Technology, Inc.

V460 - Highland Technology, Inc.

The V460 is a VME-based versatile source/measurement unit. It includes a programmable constant-current source, a precision programmable gain 16-bit analog-to-digital converter, and a 4-wire, 16-channel analog multiplexer. An internal microprocessor supervises channel scanning according to user loaded parameters, reporting sensor voltage drops or, for selected sensor types, engineering-unit data.

Product

Programmable DC Current Source

Model 121

-

Lake Shore Cryotronics, Inc.

Model 121 - Lake Shore Cryotronics, Inc.

The Model 121 programmable DC current source is a precision instrument suitable for bench-top use or panel-mounted operation in labs, test facilities, and manufacturing environments. It provides a low-noise, highly stable source of current up to 100 mA, with convenient manual selection through 13 pre-set output levels, each representing a ten-fold change in power when attached to a resistive load. A “user” setting allows the current output to be defined anywhere within the operating range of the unit, from 100 nA to 100 mA.

Product

Clamp type AC Current Sensor／for Load Current Measurements(CT Series)

CT-23S

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

CT-23S - MULTI MEASURING INSTRUMENTS Co., Ltd.

*Ultra compact size*AC 1A～200A*Current measurements of terminal feeder

Product

Current / Voltage input Panel meter with output options

DM3420

-

Labfacility Ltd.

DM3420 - Labfacility Ltd.

The DM3420 panel meter accepts Voltage and Current process signals and displays the process value on a high efficiency daylight readable LED display. A built in transmitter power supply is also provided.

Product

Current Probes

XQ13

-

Beijing GFUVE Electronics Co.,Ltd.

XQ13 - Beijing GFUVE Electronics Co.,Ltd.

The model XQ13 ac micro amp clamp on current probe is suitable for 10A-100A cable online measurement, it belongs to high performance current sensor field.

Product

Eddy Current Testing

-

Shanghai Xianda Denshijiki Industry Co.,Ltd

Shanghai Xianda Denshijiki Industry Co.,Ltd

And the eddy current generated on the specimen by the specimen by the action of the magnetic field can not be detected (defect) and the change due to the influence of the material is detected.

Product

Calibrator, Calibrated, Current, 185 mm, 78 mm, 38 mm, ± (0.25% FS +1 digit), ± (0.5%FS + 1 digit)

72-6694 CAL

-

Tenma

72-6694 CAL - Tenma

The 72-6694 CAL from Tenma is a current calibrator. It provides quality and accuracy of handheld calibrator of precision current source. It features large LCD display (maximum display counts 1999, 13mm (0.5") digit size). The current calibrator has 006P DC 9V, MN1604/PP3 battery or equivalent alkaline type or heavy duty type power supply. The dimension is 185mm × 78mm × 38mm (7.3" × 3" × 1.5") and weight is 265g/0.58lb (including battery). It has adjustable 0 to 24mA current source, 2 ranges (0 to 19.99mA (0.01mA display resolution, ±(0.25% FS + 1d) accuracy), 0 to 24mA (0.1mA display resolution, ±(0.5% FS + 1d) accuracy).

Product

Portable Three-Phase Current Load

EE-120A-3

-

EMSYST Ltd

EE-120A-3 - EMSYST Ltd

The Current Source is able to generate three-phase currents, synchronized with the service voltage, with unprecedented stability and measurement accuracy. The amplitude and phase-shift of each current is individually adjustable. The values of voltage, current, power, power factor, phase shift, THD and frequency are indicated on the LCD display.

Product

Eddy Current Probes and Drivers

-

Monitran Ltd.

Monitran Ltd.

Proximity sensors work on the eddy current principle. A proximity system consists of an eddy current probe, extension cable and driver. A high-frequency RF signal is generated by the driver, sent through the extension and probe cables and radiated from the probe tip. The tip consists of a precision wound copper coil inside a chemical and temperature resistant PEEK case.

Product

Current Generator

MIG12100

-

EMC Partner AG

MIG12100 - EMC Partner AG

MIG12100 is a current generator with wave shape 8/20 ìs. The exact waveform delivered is a function of the surge generator and the impedance to which the surge is applied. The generator can deliver up to 100kA impulse current supported by 12kV impulse voltage, making it ideal for testing big varistors with high hold-on voltage. Mechanically the MIG12100 consists of two large racks and a separate control console with high voltage output terminals protected by a glass acrylic test cabinet.

Product

Current Loop Expansion Kit

OP-SB85C

-

LINEEYE Co., Ltd.

OP-SB85C - LINEEYE Co., Ltd.

This expansion kit supports current loop communications.The kit incorporates a communications circuit with photo-coupler isolation and constant-current power supply of insulated type, thus realizing not only monitoring but also easy communications testing with passive or active current loop devices.

Product

Zero Bias Schottky Detectors

-

Fairview Microwave Inc.

Fairview Microwave Inc.

Fairview Microwave’s line of coaxial packaged zero bias Schottky detectors feature matched inputs for excellent VSWR, voltage sensitivity levels that range from 100 to 500 mV/mW for small signal detection, negative video output polarity, and can withstand maximum input power levels up to +20 dBm CW. Operating temperature range covers 0°C to +90°C and storage temperature of -65°C to +125°C. These zero bias Schottky detectors utilize compact cylindrical package outlines that are made of passivated stainless steel and offer a variety of popular input/output SMA and BNC connector configurations that make them ideal for use with precision test and measurement, instrumentation, and subsystems assemblies. Numerous applications include power measurement, leveling pulsed signal sources, AM noise measurements, radar or missile guidance systems, monitoring system level performance, and pulsed RF measurements.

Product

High Current DC Load

3350F Series

-

PRODIGIT Electronics Co, Ltd.

3350F Series - PRODIGIT Electronics Co, Ltd.

3350F has its own control and display panel, CC/CR/CV/CP/Dynamic modes, 150 sets Store/Recall memory which provides load set-up more efficiently, also can be remote controlled via GPIB, RS232、USB and LAN interface.

Product

Current Loop Data Loggers

-

Bestone Industrial Ltd.

Bestone Industrial Ltd.

This data logger can measure and store 4~20mA DC current readings automatically. The professional applications can be provided by the PC software DGraphTM. Logger status, alarm indication and low battery indication are via flashing red/green LED and yellow LED. The button on housing can be used to start logging, or confirm and clear LED alarm when LED alarm is hold status.

Product

High Power Precision Current Sensing Resistors

HPCR4T

-

RARA Electronics Corporation

HPCR4T - RARA Electronics Corporation

High Power Precision Current Sensing Resistors of HPCR4T designed with four terminals, are distinguished by excellent long term stability & TCR. The Kelvin connections of this device allow for high precision measurements even with low resistance values. HPCR 4T has a non-inductive copper manganin element inserted into the ceramic case and finally sealed with a cement molding.

Product

Eddy Current Testing Instruments

INSITE HT & CT

-

Zetec, Inc.

INSITE HT & CT - Zetec, Inc.

The Zetec InSite HT and InSite CT are multi-channel, multi-frequency eddy current testing instruments. They are both designed to operate at full production line speeds in tough manufacturing environments. Both the InSite HT and InSite CT are available in 2, 4, and 8 channel versions.

Product

SparkFun Current Sensor Breakout

INA169

-

SparkFun Electronics

INA169 - SparkFun Electronics

The INA169 is a “high-side current monitor,” which means that you place a resistor (a “shunt resistor”) on the positive power rail and the INA169 measures the voltage drop across that resistor. The INA169 outputs a small current based on the measured voltage drop. If you place a resistor from the output of the INA169 to ground, you can measure the voltage at the output.

Product

Medical Leakage Current Tester

2675Y

-

Shenzhen Chuangxin Instruments Co., Ltd.

2675Y - Shenzhen Chuangxin Instruments Co., Ltd.

The 2675Y Medical Leakage Current Tester Series Is The Test Equipment Used For Measuring Continuous Leakage Current And Patient Auxiliary Current Of Medical Electrical Equipment.It Designs And Products According To The GB9706.1_2020 (IEC60601-1:2012) .And The Test Circuit (MD)Input Impedance To Simulate The Body Impedance,It Accord With The Requirements Of GB9706.1-2020 (IEC60601-1:2012),The Test Current Can Run Up To 5A,And Provide Users With An Isolation Power Supply Which Adjustable Output Voltage For 0~250V Continuously Of The Basic Capacity Configuration For The 500VA And Provide Another 110% Voltage Source Of The Maximum Rated Voltage.It Can Satisfy The I,II, Various Types Of Equipment Test The Earth Leakage Current,Shell Leakage Current,Patient Leakage Current,Patient Auxiliary Leakage Current Under Normal Condition And The Single Fault.

Product

Through Hole type DC Current Sensor／for DC Leakage Current Measurements

DCZCT-45SH

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

DCZCT-45SH - MULTI MEASURING INSTRUMENTS Co., Ltd.

Through Hole type DC Current Sensor／for DC Leakage Current Measurements