Product

3-Phase Programmable AC Source

61700

-

Chroma Systems Solutions, Inc.

61700 - Chroma Systems Solutions, Inc.

Power: 1500VA, 3 (61701); 3000VA, 3 (61702); 4500VA, 3 (61703); 6000VA, 3 (61704); 12000VA, 3 (61705)Voltage: 0~150V/0~300VFrequency: 15~1.2KHzPhase angle: 0~360Built-in PFC, provides input power factor over 0.98Advanced PWM technology delivers high power density in a compact rack-mountable packageBuilt-in output isolation relaysAC+DC output modeProgrammable slew rate setting for changing voltage (optional function)Turn on, turn off phase angle controlUser-definable power-on statusPower line disturbance (PLD) simulation capability (optional function)Comprehensive measurement capability: V, Irms, Ipk, I inrush, P, PF, CF of current etc.Programmable r.m.s. current limitFull protection: OP, OC, OV and OT protectionGPIB and RS-232C interface (optional)Easy-use software for operation

Product

300W to 400W - Single Output

EFE Series

-

TDK-Lambda Corp.

EFE Series - TDK-Lambda Corp.

*Open frame, U channel, Cover options*High Efficiency*Active Power Factor Correction*Universal input (90 - 264VAC)*High peak loading capability*Suitable for 1U applications

Product

Sigital Uninterruptible Power System

DT Series ET

-

Clary Corporation

DT Series ET - Clary Corporation

The DT Series ET is a digital Uninterruptible Power System (UPS) which features Clary’s On-Line Double Conversion, Power Factor Corrected technology built for extreme temperature. Not only does the DT Series ET offer the highest reliability available on the market today, we consider it On-Line Double Conversion technology at its best.

Product

Rack-Mount Power Supplies

-

Advanced Energy

Advanced Energy

Explore rack-mount high voltage power supplies that feature IGBT switch mode technology or active power factor correction. And check out our rack-mount modules equipped with disc sets, which are ideal for ion-beam and electron-beam systems and X-ray equipment. Choose from standard modules or customize.

Product

Three Phase Multifunction Static kWh Meter

SY 1065

-

Hong Kong Songyang Industrial Ltd.

SY 1065 - Hong Kong Songyang Industrial Ltd.

This kind of meter integrates many functions into one, realizes the functions of time-sharing electricity measurement for active double-direction, measuring demand, sinusoidal reactive, calculating power factor, displaying and tele-transmitting present voltage, current, power and load curve etc. and it realizes the function of recording all the missing voltage, missing current and the percent of pass for voltage,

Product

Single Phase Portable Energy Meter Test Bench Type KP-P1003-C

-

Bofa Instrument & Equipment Co., Ltd

Bofa Instrument & Equipment Co., Ltd

Single-phase portable test bench, Type KP-P1003-C, is an ideal device to test all kind single-phase energy meters accuracy below 1.0. The equipment can generate single-phase voltage, current and all power factor. The equipment is box structure, light, and easy to carry, it is a very ideal device for energy meter factory to adjust meter at production line, it also can be used as testing equipment in R&D institute.

Product

Adjustable AC Power Meter

APS-6000

-

Matrix Technology Inc.

APS-6000 - Matrix Technology Inc.

The APS-6000 adjustable AC power source is a multi-function AC power source that integrates voltage, current, power and power factors. The internal high-speed processor is a cost-effective, high-stability AC power source.

Product

Automatic Battery

BATLV480

-

Lifasa - International Capacitors, SA

BATLV480 - Lifasa - International Capacitors, SA

LIFASA automatic capacitor banks are used for centralized compensation of power factor in low voltage instalations.

Product

Bench Power Supply, Single, Adjustable, 2 Output, 1 V, 15 V, 60 A

72-7655

-

Tenma

72-7655 - Tenma

High current switch mode power supply with remote sensing and control.*Bright 3 digit dual LED displays*Simultaneous display of output voltage and current*Excellent load and line regulation*Low ripple and noise*Overload (constant current limiting), short circuit, over temperature and OVP protections*Variable speed thermal static control fan for cooling*Highly efficient active power factor corrector*Front panel banana jacks for loads up to 5A*Rear panel binding posts for loads up to 60A*12-month limited warranty *view Terms & Conditions for details

Product

DC Power Supply

CSP-3

-

Adtek

CSP-3 - Adtek

● Universal power AC90~264V/DC127~380V● Build in power factor control circuit in high power model(120W~500W)● Available for series and parallel operation● To be a Back up power function with relay output in option( not available in model 20W and 24W)● RoHS & UL version in option● DIN rail mounting

Product

Split Core Current Transformers

-

AYA-Instruments

AYA-Instruments

Application:Watt Transducer, Current Transducer, KWH Meter, Demand Meter, Power Factor Meter, Current Sensing Relays, Energy Management SystemsContinuous Thermal: Rating 1.25 at 30° C, 1.0 at 55° C Standard 5-amp secondary. Others available.

Product

175W - Single Output / Multiple Output

NV CONFIGURABLE Series

-

TDK-Lambda Corp.

NV CONFIGURABLE Series - TDK-Lambda Corp.

*1-5 Outputs*Up to 90% Efficient*Active Power Factor Correction*Universal Input (90 - 264VAC)*No Minimum Loads*Medical Approvals

Product

Injection Transformer

J2101A

-

PICOTEST Corp.

J2101A - PICOTEST Corp.

The injection transformer is presently the prevalent method for connecting the network analyzer to the circuit being tested, and is primarily used for control loop stability measurements. The goal of the transformer is to inject a signal into the control loop being measured, without impacting the performance of the loop. In order to accomplish this to a reasonable degree, The transformer is isolated and therefore is capable of floating on a high voltage, such as a Power Factor Corrector (PFC), which is often close to 400VDC. Measuring voltages that exceed the voltage rating of the FRA inputs require attenuation probes.

Product

LED Tester0.3m-2m Integrating Sphere

CX-8000

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-8000 - Shenzhen Chuangxin Instruments Co., Ltd.

Measure Luminous Flux, Luminous efficacy, radiant power, Spectral Power Distribution, Chromaticity Coordinate, Correlated Color Temperature, Peak Wavelength, Dominant Wavelength, Spectral Half Width, Color Rendering Index, Colorimetric Purity, red ratio, Standard deviation of color matching(SDCM), voltage, current, power, power factor, harmonics, and etc. It meets the requirements of CIE standards.

Product

Light Compensation Capacitor

CBB80

-

CABO Electronics

CBB80 - CABO Electronics

Designed for lighting applications such as fluorescent lamps,high-pressure mercury vapor lamps,sodium lamps,and metal halide lamps. The capacitors are used for power factor compensation of transformers and magnetic ballasts in lamps with a frequency of 50Hz or 60Hz,which makes the power factor to achieve cosφ 0.9. The temperature

Product

Digital PFC Controllers with Power Metering

-

Analog Devices Inc.

Analog Devices Inc.

Are digital power factor correction (PFC) controllers that provide accurate input power metering capability and inrush current control for ac/dc systems.

Product

Portable Power Factor Meter

ST-2000 Cos∮

-

Standard Electric Works Co., Ltd

ST-2000 Cos∮ - Standard Electric Works Co., Ltd

● Principle : Phase angle sensing transducer● Rated Accuracy : ±3% phase angle● Scale : Power Factor：Lead 0 – 0.3 – 1.0 – 0.3 – 0 Lag Power Angle： Lead 90° – 0° – 90° Lag● Effective Power Factor Measuring Range : Lead 0.5 – 1.0 – 0.5 Lag● Scale Length : Approx. 135mm(5-3/8”)● Frequency Influence : Within ±1.5° phase angle at 45 to 65Hz

Product

LED Lighting Test Instrument Integrating Sphere

CX-I.5S

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-I.5S - Shenzhen Chuangxin Instruments Co., Ltd.

Measure Luminous Flux, Luminous efficacy, radiant power, Spectral Power Distribution, Chromaticity Coordinate, Correlated Color Temperature, Peak Wavelength, Dominant Wavelength, Spectral Half Width, Color Rendering Index, Colorimetric Purity, red ratio, Standard deviation of color matching(SDCM), voltage, current, power, power factor, harmonics, and etc. It meets the requirements of CIE standards.

Product

Electronic Ballast Tester

WT4000

-

Lisun Electronics Inc.

WT4000 - Lisun Electronics Inc.

• Measure parameter: 1) Input: Vrms, Lrms, W, PF, Hz, Phasic angle, total harmonic and 0-39 component of harmonic. 2) Output: Lamp voltage, Lamp current, Filament current, Guided cathodic current, Lamp power, crest factor and oscillatory frequency, single high frequency analysis. • Startup: Startup lamp voltage, lamp current, filament current, guided cathodic current curve and parameter, preheating time; • Simultaneously display on 8 windows for input and output parameters, convenient for comparison and analysis; • Test preheat energy, filament preheat time. And the parameters changes from 0 to 5s of filament voltage, filament current and filament power; • Up to 1MHz lrms test content to every EB; • Analysis symmetry of high Frequency curve of lout; • 12-bit high-speed A/D, sampling rate up to 10MHz, can easily analyse signal curve of output; • Finish an input and output testing at the same time within 1 minute; • Portable, can test, display, print without computer. Test report include data and curve, comply with international standard; • Communication port for PC, run under Windows98 or Windows2000, English Version available.

Product

3-phases Power Analyzers

-

PeakTech Prüf- und Messtechnik GmbH

PeakTech Prüf- und Messtechnik GmbH

s a power analyzer with a large LCD display. Measured power can be recorded with the analyzer, but it is also possible to record and display various voltages, currents, power factors and many other variables. Several electrical variables are attracted during a measurement, so it is possible to show the power and the cos φ at the same time.

Product

Automatic Battery

BATLV800

-

Lifasa - International Capacitors, SA

BATLV800 - Lifasa - International Capacitors, SA

LIFASA automatic capacitor banks are used for centralized compensation of power factor in low voltage instalations.

Product

50W to 300W - Single Output

ZWS-BAF Series

-

TDK-Lambda Corp.

ZWS-BAF Series - TDK-Lambda Corp.

*Universal input (85 - 265VAC)*10 Year e-cap Lifetime*Power Factor Corrected*Convection Cooled*Compact Design*Five year warranty

Product

1-phase Power Analyzers

-

PeakTech Prüf- und Messtechnik GmbH

PeakTech Prüf- und Messtechnik GmbH

Is a high-precision energy cost measuring device for recording the energy consumption of electrical devices and for calculating the current consumption of a device by entering the electricity price. Thanks to the integrated power factor calculation, all modern consumers such as Switching power supplies, TV sets, fluorescent lamps, LED systems and of course ohmic loads such as Electric heaters and hobs can be measured accurately. In addition, the high resolution, the low response characteristic and even very small or stand-by consumers from approx. 1 W can be measured.

Product

Injection Transformer

J2100A

-

PICOTEST Corp.

J2100A - PICOTEST Corp.

The injection transformer is presently the prevalent method for connecting the network analyzer to the circuit being tested, and is primarily used for control loop stability measurements. The goal of the transformer is to inject a signal into the control loop being measured, without impacting the performance of the loop. In order to accomplish this to a reasonable degree, The transformer is isolated and therefore is capable of floating on a high voltage, such as a Power Factor Corrector (PFC), which is often close to 400VDC. Measuring voltages that exceed the voltage rating of the FRA inputs require attenuation probes.