Product

01 With Pins For PCB | 12 Positions | M6

01-1xxx-20/70xx-12-M

-

ELMA Electronic, Inc.

01-1xxx-20/70xx-12-M - ELMA Electronic, Inc.

Multi wafer compact selector with 30° detent angle, 3 mm shaft diameter, 25'000 switching cycles and with up to 6 Ncm switching torque

Product

Position Sensors

-

CTS Valpey Corp.

CTS Valpey Corp.

High-performance position sensors for automotive, industrial, and medical applications.

Product

Positional Current Probe, PCB Track Touch And Measure

I-prober 520

-

Aim-TTi

I-prober 520 - Aim-TTi

Current measurement from insulated probing of conductorSuitable for observation and measurement of current in PCB tracks, component leads and ground planesWide dynamic range of 10mA to 20A peak to peakWide bandwidth of DC to 5MHzLow noise figure equivalent to <6mA rms at full B/WSafety rated to 300V Cat II (600V Cat 1)Suitable for connection to any oscilloscopeHigh accuracy general purpose H-field probeConverts to 'closed magnetic circuit' current probe

Product

Perforated Positive Coin Cell Case For In-Situ Testing

PCC1

-

PotentioLab

PCC1 - PotentioLab

Perforated CR2032 stainless steel coin cell case (4-piece set) with customizable hole diameters for in-situ electrochemical testing, gas diffusion studies, and battery material research.

Product

X, Y, Θ Position Calibration Plate For Machine Vision and Microscopy

nanoGPS OxyO Scale

-

HORIBA, Ltd.

nanoGPS OxyO Scale - HORIBA, Ltd.

nanoGPS OxyO® Scale is a position calibration plate for Machine Vision and Microscopy, available as OEM or stand-alone solution from HORIBA Scientific.nanoGPS OxyO® technology is based on taking a picture of a patented patterned substrate, and interpreting this picture into position (x, y) and orientation (θ). The nanoGPS OxyO® Encoder is also based on this technology.

Product

Quadrature Position & Rate Meter

-

Laurel Electronics, Inc

Laurel Electronics, Inc

Accepts low-level differential or single-ended 5 V logic level quadrature signals from shaft encoders to display scaled position or scaled rate. One, two or four transitions may be counted at a maximum combined rate of 250 kHz and be mathematically scaled to display in engineering units from -999,999 to +999,999. An analog output scaled to the display and relay outputs are optional.

Product

MR50 THT Vertical | 16 Positions | 2 Poles | 1/4''-28 UNF

MR50-A3/4xA/B

-

ELMA Electronic, Inc.

MR50-A3/4xA/B - ELMA Electronic, Inc.

Highly robust Ø 1/2" selector with 22.5° indexing angle, up to 6 Ncm switching torque and operating temperature from -45 to 85° C

Product

ALD Periodic Table

-

Veeco Instruments Inc

Veeco Instruments Inc

The ALD Periodic Table is a visual guide to the elemental building blocks of atomic layer deposition. Organized by both chemistry and purpose, it helps engineers quickly find materials that meet their priorities, whether that’s conductivity, durability, clarity or thermal stability.

Product

Positive Displacement (PD) Meters

-

AW Gear Meters

AW Gear Meters

Positive Displacement (PD) flow meters are volumetric flow measurement instruments ideal for low flow rates, highly viscous fluids, and measurement of flows involving starts and stops or pulsing. Positive displacement flow meters are similar in design to the gear pump. The principle of operation is reversed however; instead of the gears driving the fluid, the fluid drives the gears. A non-intrusive hall-effect sensor detects the movement of the gear and as each gear tooth passes the sensor, a square wave pulse is produced and a discrete volume of liquid is measured. The resulting pulse train is proportional to the actual flow rate and provides a highly accurate representation of the fluid flow.

Product

Isocratic Pumps - Single Piston, Positive Displacement Piston Pumps

ReaXus LS Class

-

Teledyne LABS

ReaXus LS Class - Teledyne LABS

The reliable ReaXus LS Class consists of single-headed, positive displacement piston pumps incorporating advanced cam designs for very low pulsation.The pumps are ideal for a wide variety of applications, Semi-Prep LC, metering & dispensing​, and general laboratory use. Standard fluid path materials are Stainless Steel with PEEK options. Other available features include jacketed heads for temperature controlled processes. With 5 mL/min, 10 mL/min, and 40 mL/min versions available, and pressure capability up to 6,000 psi, these versatile pumps will meet the most demanding applications.Features include automatic pressure compensation, Pulse Dampener, integrated Prime-Purge Valve, interactive keypad control, and complete PC control and status through RS-232 and Micro USB 2.0 ports. The unique LS Class provides the highest performance/cost ratio in a compact package.

Product

MR50 THT Vertical | 16 Positions | 1 Pole | 1/4''-28 UNF

MR50-A1/2xA/B

-

ELMA Electronic, Inc.

MR50-A1/2xA/B - ELMA Electronic, Inc.

Highly robust Ø 1/2" selector with 22.5° indexing angle, up to 6 Ncm switching torque and operating temperature from -45 to 85° C

Product

PMC Carrier with 4 positions

PMC-MC-X4

-

Dynamic Engineering

PMC-MC-X4 - Dynamic Engineering

The PMC-MC-X4 adapter / carrier converter card provides the ability to install up to 4 (four) PMC cards into a small enclosure. The PMC-MC-X4 has two PMC card slots mounted front and rear to create a compact arrangement with 4 PMC slots. Suitable for 32/64 with 33/ 66 MHz bus operation.

Product

Position / Distance / Proximity Sensors

-

Panasonic Industrial Devices Sales Company of America

Panasonic Industrial Devices Sales Company of America

Easy-to-use Inductive Proximity Sensors provide stable detection for automation, with Sensors for standard to high speed, high performance solutions. These Inductive Proximity Sensors detect the presence and position of ferrous and non-ferrous metal objects and come in a range of IP Ratings (IP50 / 67 / 68 / 68g). The IP68g enclosure allows usage in very harsh environments. For high speed, high accuracy measurement, Laser Measurement Sensors are ideal for the precise measurement of thickness, diameter and height.  Panasonic’s HG-C Series CMOS Type Micro Laser Distance Sensors deliver high repeatability for measurement distances (center) of 30mm, 50mm, 100mm, 200mm and 400mm. Ideal to measure insertion depths or thickness, these Sensors can also be used to detect warping, overlaps and presence helpful for preventative maintenance and remote monitoring.  Select models are IO-Link compatible for ease of use.

Product

Switch Probe (Position Sensor System) PS73217B140G020

1150058

-

FEINMETALL GmbH

1150058 - FEINMETALL GmbH

The Switch Probes (Position sensor system) PS73217B140G020, with order code 1150058, is a precision instrument designed for high-performance applications. This model features a basic contact probe design that ensures superior accuracy in measuring positional data. Operating within a temperature range of -45°C to +100°C, it is suitable for a variety of environments. With a pitch of 2.54 mm, these probes offer excellent functionality for tight spaces and intricate systems where precision is crucial.

Product

Breakout Boxes 9D thru 104DD Positions

D-SS Series

-

Silver Engineering, Inc.

D-SS Series - Silver Engineering, Inc.

Silver Engineering's D-SS Series Breakout Box is aheavy duty break out box designed to withstand theabuses of the test environment. The heavy dutyconstruction and the use of high quality stainlesssteel connector shells and components insurethese units will last for years.

Product

Non-contacting Position Sensors

-

Vishay Intertechnology, Inc.

Vishay Intertechnology, Inc.

For use in harsh environments, Vishay offers non-contacting position sensors based on Hall Effect technology. Linear displacement, rotational (single- and multi-turn), and kit design options all provide a full 360° measurement range with no dead angles and very long life, since there is no wear and tear on sensor elements. Applications for Vishay’s non-contacting position sensors include any system where vibration, shock, or dithering is to be expected, such as embedded applications in vehicles.

Product

Test Tables / Test Consoles

-

adaptronic Prüftechnik GmbH

adaptronic Prüftechnik GmbH

Adaptronic test tables and test consoles are a decisive component of the adaptronic kit for the assembly of comfortable and high-quality test systems for the wiring test of manufactured cable harnesses of all types.