Product

Programmable DC Power Supply

CBCT

-

Manta Test Systems

CBCT - Manta Test Systems

The CBCT is a variable voltage DC power supply designed specifically to test substation circuit-breaker Open and Close coils. The CBCT uses the substation’s DC power supply to electronically generate a programmable output voltage from 5% to 95% of the source voltage. The CBCT can maintain up to an 80A test current while maintaining 2% or better voltage regulation during the circuit breaker coil operation.

Product

Programmable Digital Attenuator

LDA-602EH

-

Vaunix Technology Corporation

LDA-602EH - Vaunix Technology Corporation

The LDA-602EH has a large attenuation range of 120 dB with an exceptional 0.1 dB step size, allowing for both precision and accuracy during fading tests or device characterizations. This attenuator also features a fast 15 us switching speed, an operating temperature from -30oC to 50oC, a maximum RF input of +28 dBm, and is priced at $875. The LDA602-EH operates with a low insertion loss of 9 dB to 6 GHz, an input IP3 of +55 dBm and a typical VSWR of 1.3:1. Easily programmed for ATE applications, the LDA digital attenuators are a cost effective solution whether you are in engineering, the production test lab, or in the field. Units are ROHS compliant and can be used with any PC or laptop computer with USB 2.0 port (or powered USB hub) and Windows operating system. Lab Brick Signal Generators are provided with easy to use Lab Brick GUI software, 32 and 64 bit API DLL files, LabVIEW and Linux compatible drivers.

Product

Programmable AC Laboratory Power Supplies, Current-controlled

-

ET System Electronic GmbH

ET System Electronic GmbH

*Fast regulation of the current*Voltage depends on the load*Current and voltage values ​​are configured based on the customer's actual requirements*Power from 250VA to 36kVA*Output voltages 1VAC to 300VAC*Maximum currents up to 2000A per phase

Product

AC Relays

-

E-Max Instruments

E-Max Instruments

The E-MAX ATR and ACV Relays are the AC equivalents of the industry standard E-MAX TIR Trip Indication Relays and AVR Auxiliary Voltage Relays. While the TIR and AVR Relays are designed for use in DC trip circuits, the ATR and ACV are designed for use in AC trip circuits. The relay outputs may be used to record breaker, relay, communication and control system operations, and to activate alarm and/or annunciator contacts. Relays do not require standby power to operate; they are powered by their inputs.

Product

AC DC High Voltage Divider

-

Neutronics Manufacturing Co.

Neutronics Manufacturing Co.

NMC make products are the ideal equipment for HV measuring products are the ideal equipment for HV measuring instruments, apply in power system, electronic equipment factory to test frequency AC high voltage and DC high voltage. This product is composed by HV measuring part and LV display instrument. HV part and LV display instrument are separate when working, it is safe and reliable.

Product

Programmable RS-232, IR, and I/O Controller

HR-4P

-

Hall Research Inc.

HR-4P - Hall Research Inc.

The Model HR-4P is a programmable RS-232 device designed for control & automation of a Projector, LCD, or any other device with serial or IR port.

Product

Precision DC Source Instrumentation

-

Marvin Test Solutions, Inc.

Marvin Test Solutions, Inc.

High power, dual channel PXI User Power Supplies as well as precision DC source instrumentation. These products are offered in both PXI and GTXI formats.

Product

AC Load Bank (Resistive & Inductive)

K-1000 Resistive & Inductive

-

Kongter Test & Measurement Co., Limited

K-1000 Resistive & Inductive - Kongter Test & Measurement Co., Limited

Kongter resistive & inductive AC load banks are used to simulate the motor loads or other electromagnetic devices working at their rated power factor. Many backup generators and turbines are rated at 0.7, 0.8 or 0.85 power factor and need to be commissioned at nameplate capacity using a combination of resistive and reactive load to fully qualify their operating capability. Using a resistive & reactive load bank enables comprehensive testing from a single unit.

Product

Precision Voltage and Current Sources

VI-700

-

IET Labs

VI-700 - IET Labs

The VI-700 Voltage and Current Source is a versatile precision dialable or remotely programmable voltage and current source. Its three ranges provide up to 20 V full scale (200 V with the HV option), and down to 100 mV resolution; and 20 mA full scale down to 0.1mA resolution. Both voltage and current outputs are available simultaneously. The output is set by a range selector and thumbwheel switches in the LOCAL mode, or by a digital input at the rear panel. The REMOTE mode control can be a RS232 or IEEE-488 interface.

Product

*Energy Sensors For IPL Sources

-

MKS Ophir

MKS Ophir

Ophir has several ways to measure intense pulsed light IPL radiation used in cosmetic treatments. The light from these sources is broadband and usually has a high divergence. Furthermore, the light source is often coupled to the skin via an index matching gel. For these reasons, we need special solutions to accurately measure the energy of the IPL pulses.

Product

AC Clamp Meter

2940 CL

-

Standard Electric Works Co., Ltd

2940 CL - Standard Electric Works Co., Ltd

Pocket size. 4000 counts. Full automatic measurement (Voltage measurement, Current measurement, Resistor measurement). Data hold function. Continuity check. Diode measurement. Select function. Low battery indication. Auto off function. Flashlight (Auto off in 1 minute).

Product

Programmable DC Power Supply

IT6100B Series

-

I-TECH Electronic Co., Ltd

IT6100B Series - I-TECH Electronic Co., Ltd

IT6100B series (86 ~ 1200W) high speed high precision programmable DC power supply is withultra high voltage rising time, the fastestfull load up to 500us, resolution up to 0.1mV / 0.01mA, the latest output waveform priority mode allows rising waveform ofvoltage or current  is with high-speed and no overshoot, which is widely used inaerospace power modules and other high-precision test occasions. IT6100B hasbuilt-in standard USB / RS232 / GPIB communication interface and the panel supports List programming, which canprovide multi-purpose solutionaccording to customer design and testing demands, easy to use.

Product

Noise Sources

NC1128A

-

DVTest Inc.

NC1128A - DVTest Inc.

This noise source by Noisecom produces white Gaussian noise up to +13 dBm. It contains a hermetically packaged noise diode that has been pre-selected for special performance characteristics. This module is ideal for many different applications including CATV, Secure communications, Jamming systems, OC-192 Testing, EW & EC.

Product

DC to AC Power Inverter

TE-1206B

-

Prokit's Industries Co., Ltd.

TE-1206B - Prokit's Industries Co., Ltd.

Help to operate all kinds of devices need the AC power, such as electric lights, kitchen appliances, power tools, TVs, radios, computers and more. The extra USB can provide power for using/charging mobile phones and digital devices conveniently.

Product

Small Engine AC Motoring Dynamometers

-

Dyno One Inc

Dyno One Inc

SAKOR Technologies developed its new Small Engine AC Motoring Dynamometer specifically to meet the needs of engine manufacturers who must now comply with engine testing procedures required by new emission standards contained in 40 CFR Part 1065. These new requirements apply to almost every kind of small internal engine, including those in handheld power tools and lawn and garden tools.

Product

Split type AC Current Sensor

CTF-13NF

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

CTF-13NF - MULTI MEASURING INSTRUMENTS Co., Ltd.

* Ultra compact size and high accuracy. * Easy installation in the distributing box. * Compliant with RoHS drective.

Product

DC Power Source for Standard Lamp

DC502

-

Lisun Electronics Inc.

DC502 - Lisun Electronics Inc.

DC502 is CONSTANT CURRENT DC POWER SUPPLY for standard lamp. Function and technical indexes are as follows: • output voltage 4 grades: 6V/12V/24V/50V • output current: DC 0~2.5A (adjustable) • Output current drift at full scale: ±0.05% reading value/10 mins • Monitor range of ampere meter: 0.0000A ~1.9500A, 1.950 A ~2.500A • Accuracy of ampere meter: ± (0.08% reading value + 0.02% full scale) • Max output power: 80W • Continuous working time: 8 hours • Work environment: Temperature 0℃ -25℃, humidity ≤ 85%R.H, supply source: AC220 ±10%, 50/60HZ • Holding conditions: -20~50℃ humidity < 75%R.H • Outside dimension (W×H×D): 333mm×114mm×307mm • Weight: about 8kg • Power: about 1000VA

Product

3 AXIS DIGITAL AC GAUSSMETER

IDR-fw4180

-

Integrity Design and Reseach Corp.

IDR-fw4180 - Integrity Design and Reseach Corp.

This FWBELL 4190 model features three axis sensors which insure that measurements remain accurate regardless of the orientation of the instrument.

Product

Split type AC Current Transformer

CTF-200T

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

CTF-200T - MULTI MEASURING INSTRUMENTS Co., Ltd.

*1A output for metering application.*Wire stopper is equipped for the slipping protection.*The special connector is not necessary as the output terminals are provided.*Open circuit protection and nonflammable plastic material.

Product

6 Digital Microprocess AC Watt-hour Meter

WHM

-

Chitai Electronic Corporation

WHM - Chitai Electronic Corporation

‧ 6 Digits Display (999999)‧ CT×PT rate free setting 1~4095 times.‧ Pulses output (option).‧ DIN Size 96×48mm.

Product

Programmable Logic Unit PLUS

V2495

-

CAEN S.p.A.

V2495 - CAEN S.p.A.

The V2495 can be controlled and programmed “on the fly” via the VME Bus or directly through the Mini-USB connector on the front panel. A Software tool is provided for free to easily upload the custom Firmware on the User FPGA.

Product

AC Source

AFC

-

Intepro Systems

AFC - Intepro Systems

The AFC Series products are single and three phase AC Power sources ranging from 0.5kVA to 2000kVA. This AFC series has a continuous and adjustable output voltage between 5~300V. This allows for quick and convenient 3 scales of preset voltage for high and low voltage simulation. Power is supplied by state-of-the-art IBGT pulse width-modulated power amplifiers resulting in highly efficient power conversion, compact design and maximized performance. With up to 90% efficiency the AFC minimizes heat dissipation so less infrastructure cooling is required.

Product

Surface Mount Noise Sources

-

Pasternack Enterprises, Inc.

Pasternack Enterprises, Inc.

Surface Mount Noise Sources from Pasternack