Product

Voltage Controlled Phase Shifters To 3200 MHz

-

Pulsar Microwave Corporation

Pulsar Microwave Corporation

Pulsar's Voltage Controlled Phase shifters utilize a DC voltage to control the phase of the RF signal applied. These phase shifters utilize varactor diodes to produce the necessary phase requirements. Phase of the 180 and 360 degree designs are available, and phase can be controlled with a DC voltage 0-20 Vdc. Modulation of these phase shifters is typically 100 kHz, and maximum input power is +5 dBm.A wide variety of package styles are available, such as plug-in, flatpack, TO-cans, and connectorized housings, though the most popular are the miniature surface mount packages. Surface mount packages are available on tape and reel, for automated assembly techniques.

Product

High Voltage 50 Ω Pulse Generator

TLP-8010C

-

High Power Pulse Instruments GmbH

TLP-8010C - High Power Pulse Instruments GmbH

*Wafer and package level TLP/VF-TLP/HMM testing*Combines TLP-8010A and TLP-4010C into one system*Can be operated together with TLP-8012A5 and TLP-3011C pulse width extenders*Ultra fast 50 Ω high voltage pulse output with typical rise time 100 ps (0-40 A) and 300 ps (> 40 A)*Up to 80 kW peak output power into 50 Ω load*Built-in HMM pulse up to ±15 kV with 50 Ω configuration*High pulse output current up to ±80 A (short circuit) with minimum 6 dB reflection suppression*High speed 50 Ω trigger output for oscilloscopes (synchronous to high voltage pulse output)*6 GPIB programmable pulse rise times: 100 ps to 50 ns*8 programmable pulse widths: 1 ns to 100 ns (0-40 A), 1 built-in pulse width: 100 ns (> 40 A)*The optional pulse width extender TLP-3011C enables pulse width up to 1.6 µs in 68 GPIB programmable steps (0-40 A)*Optional external pulse width extensions from 5 ns to 500 ns (> 40…80 A) using the external pulse width extender TLP-8012A5*Built-in pulse reflection suppression*Fast measurement time, typically less than 0.2 s per pulse including one-point DC measurement between pulses*Efficient software for system control and waveform data management*The software can control automatic probers for fast measurements of complete wafers*High performance and high quality components

Product

Voltage & Continuity Tester

-

Morris Products Inc.

Morris Products Inc.

Heavy Duty Solenoid Voltage & Continuity Tester - LCD Live Wire and Stud Detector for carpenters and electricians.

Product

Closed Loop Hall Effect Current Sensors/Transducers

-

ChenYang Technologies GmbH & Co. KG

ChenYang Technologies GmbH & Co. KG

This Hall Effect current sensor is based on closed loop compensating principle and can be used for measurement of DC and AC current, pulse currents etc. The output of the transducer reflects the real wave of the current carrying conductor

Product

High Frequency Current Transformer Clamps

HFCT-20HD & HFCT-60HD™

-

ndb Technologies Inc.

HFCT-20HD & HFCT-60HD™ - ndb Technologies Inc.

The HFCT-20HD™ and HFCT-60HD™ are high frequency current transformer sensors designed for partial discharge detection on electric apparatus’ ground returns. Made from superior quality materials, it is designed for any environment.

Product

Eddy Current Dynamometer

EC Series

-

Power Test, Inc.

EC Series - Power Test, Inc.

Specifically designed for small displacement diesel engines, the Eddy Current (EC-Series) engine dynamometer features in-line eddy current absorption units in a robust, compact frame. The air-cooled eddy current absorbers eliminate the need for an expensive water recirculation system and most engines being tested can be cooled with a standard closed-circuit radiator system. This compact air-cooled design results in a minimal environmental impact and the ability to be easily relocated with no need for a permanent installation. When combined with PowerNet LT, our fully automated dynamometer control system, all of your testing needs can be performed at the touch of a button.

Product

Precision High Voltage Meter

4700

-

Vitrek Corporation

4700 - Vitrek Corporation

The Vitrek 4700 Precision High Voltage Meter offers the highest level of measurement accuracy when it comes to high-voltage measurement equipment. Its color touch screen is surprisingly easy to use for set up and display of testing results.  Vitrek leverages DSP technology to provide outstanding AC &DC high voltage measurement accuracy, stability, repeatability and resolution.  The 4700 High Voltage Meter offers performance that rivals traditional high voltage reference dividers – yet unlike the tedious divider, the 4700 provides instant, direct, high voltage measurements in a highly portable, compact and rugged bench top enclosure.

Product

Modular Low Voltage Motor Protection

LM10

-

GE Vernova

LM10 - GE Vernova

The GE Multilin LM10 Low Voltage Motor Protection System is a modular device for low voltage motor protection. The compact design of the LM10 is ideally suited for Low Voltage Motor Control Center applications but can also be used in standalone applications. The LM10 comes standard with the DeviceNet protocol that allows the user to control and monitor the relay over a network. The relay also has an interface port to communicate with the optional LM10 Programmable Display Unit (PDU).

Product

Pulse Current Generator Multi-Pulse Generator

-

Shanghai Guantu Technology Co., Ltd.

Shanghai Guantu Technology Co., Ltd.

What is the difference between ordinary current and pulse current?The difference between ordinary current and pulse current: ordinary current is continuous and uninterrupted current.Pulse current is a current whose direction does not change and whose intensity changes periodically with time.

Product

Multi Circuit DC Current Monitor (16 channels)

MCM-1600PV

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

MCM-1600PV - MULTI MEASURING INSTRUMENTS Co., Ltd.

Measuring･display of DC current values generated by PV systems and DC load current of related apparatus in multi circuit successively for a long term as well as memorizing the average current values between the intervals, of which data can be transmitted to PC in Excel File.

Product

Voltage Tester, 90V to 1000V

72-10385

-

Tenma

72-10385 - Tenma

Non Contact AC Voltage Detector with Vibrating Alert The easy to use AC Voltage Detector provides site, sound, and vibration indication for added safety in even bright or noisy environments. Flashing, beeper, and vibrating indicators to alert use of AC voltage.

Product

2000 Amp DC / 1500 Amp AC Current Probe

DC2000

-

Summit Technology, Inc.

DC2000 - Summit Technology, Inc.

Our DC2000 Current Probe measures up to 2000 amps DC (as well as 1500 amps AC).  Self-powered via our meter, so there are NO batteries that can run down during a measurement session.

Product

Voltage Detectors & Others

-

HT Italia Srl

HT Italia Srl

Voltage Detectors, Circuit Breaker finder, Portable working lamp are Indispensable equipment which must always accompany the technician. Its essential characteristics are an extreme handiness, a very high protection degree and easiness of use.

Product

12-300V AC Screwdriver Voltage Tester

5130

-

Peaceful Thriving Enterprise Co Ltd

5130 - Peaceful Thriving Enterprise Co Ltd

*Category: CAT II.*With CE and cETL Approval.*Check voltage on 12-300V AC.*Test for voltage and continuity.*Power by two LR44/L1154, 1.5V batteries.*Pollution degree: 2 (accordance with IEC 60664-1)

Product

Low Voltage Cable Tester

1100R+

-

Cirris Systems Corporation

1100R+ - Cirris Systems Corporation

The 1100R+ bench top cable tester packs impressive capabilities into a package that is small, affordable, and intuitive. The large display and sensible button interface make cable testing quick and easy. Test Point Range: 128-1024, Test Voltage: 5VDC 6mA max current.

Product

Dynamite Source Controller

BOOM BOX III

-

Seismic Source Co.

BOOM BOX III - Seismic Source Co.

*Easy to Use, just hold the Arm and Charge toggles, Unit charges and is ready to fire*Web based interface allows easy setup and storage of data on PC, Tablet, or Cell phone*Shooter updated with easy to read graphical display and status LEDs*Same unit used for Encoder and Decoder modes

Product

MCB Test Option, Monitor Voltage Adapter

PTE-FCB

-

EUROSMC, S.A.

PTE-FCB - EUROSMC, S.A.

The PTE-FCB / PTE-FCD can be used to effectively reduce the sensitivity of the monitor input. The monitor input detects the relay’s operation and stops (or starts) the chronometer when testing with the PTE-100-C, PTE-50-CE, PTE-50-CET, and all LETs excluding the LET-400 (which lacks a chronometer).

Product

Noise Source Family

346 Series

-

Keysight Technologies

346 Series - Keysight Technologies

This series of broadband noise sources has been designed to cover the majority of measurement applications with a range of frequencies, Excess Noise Ratio (ENR) and coaxial connector types.

Product

AC Power Sources

BPS Series

-

AMETEK Programmable Power, Inc.

BPS Series - AMETEK Programmable Power, Inc.

The BPS Series consists of multiple high power AC power systems that provide controlled AC output for ATE and product test applications. This high power AC test system covers a wide spectrum of AC power applications at an affordable cost. Using state-of-the-art PWM switching techniques, the BPS Series combines compactness, robustness and functionality in a compact floor-standing chassis, no larger than a typical office copying machine. This higher power density has been accomplished without the need to resort to elaborate cooling schemes or additional installation wiring. Simply roll the unit to its designated location (using included casters), plug it in, and the BPS Series is ready to work for you.