Process Control
See Also: Process Controllers, OPC
-
Product
Distributed Motion Control
-
ADLINK's Intelligent Remote Data Acquisition & Control Modules (NuDAM) are designed for data acquisition systems based on PCs and other processor based equipment with standard serial I/O ports (RS-232 or RS-485 with auto direction control).The modules convert input/output signals to engineering units and transmit/receive, in ASCII format, to/from any host computer with an RS-232 or RS-485 port. NuDAM modules are the key components in flexible and cost effective remote data acquisition and control systems.
-
Product
Pyrometer With Integrated Controller
thermoMETER CS
-
The infrared thermoMETER CS temperature sensors are equipped with a miniature sensor that is particularly suitable for installation in confined spaces. The small size and temperature resistance up to 120°C open up a wide range of applications.
-
Product
DC Control Tools
-
Assembly designs are getting more and more complex while production speeds continue to increase. To compete, lean manufacturers strive to complete more work with fewer tools. A single Mountz DC control tool can do the work of 2-15 regular tools, saving space and increasing production. Mountz DC control tools are easy to program and can remember up to 30 process sequences with 20 program steps. This gives you the flexibility you need to carry out varied and complicated manufacturing plans. A Swiss DC servo motor controls torque delivery with clockwork repeatability. Combined with built-in screw counters and error-proofing software, Mountz DC control tools offer supreme production results and product oversight. And by providing documented fastening results, Mountz DC control tools also make regulatory compliance easy.
-
Product
Instrument Control & Connectivity Software
-
Connect, Configure, and Automate Your Tools.It shouldn't take a headache to get the most out of your tools. That's why Keysight offers a suite of licenses, libraries, and instrument control software to help you automate workflows and accelerate innovation.From simple connectivity and programmatic control to software integrations and test automation suites, our turnkey solutions mean you can spend more time thriving — and less time toiling with lengthy workarounds.
-
Product
Pressure Control
-
Precise control of compressed gas is an intelligent approach to calibration. Ralston Instruments offers a number of pressure control devices for use in a wide range of applications and pressure levels.
-
Product
Wireless Controller
Site Sentinel
-
Teledyne Gas & Flame Detection
Each system includes a tripod, network HMI, gas detection sensor(s), and alarm warning devices. An optional Sentinel SiteWatch provides remote access to system data via Ethernet or cellular communication. Power to the sensor assembly is supplied by a rechargeable Smart Battery Pack, disposable batteries or directly from HMI. Flexible and expandable, a Site Sentinel network can include up to 32 devices and consist of any combination of wireless and/or wired sensors, one or more HMI panels and optional solar panels. Additional sensors and/or remote alarm stations on tripods can be added as needed to assure widespread alert to site personnel.
-
Product
Process Verification System (PVS)
-
In today’s complex manufacturing world, having a manufacturing tool that can be connected into manual and automated processes, can help you achieve your error proofing goals. Whether you are assembling a complex modern tractor trailer design or building the next generation jet engine. If you have a variety of manual steps or a mix of automated processes, PVS is the tool of choice to make your LEAN manufacturing process, an effective one. The ARC PVS platform is a flexible, user configurable software and hardware platform that can be the essential tool. It includes a built-in controller architecture allowing you to connect together PLCs, smart torque and assembly tools and a variety of discrete processes.
-
Product
Process Development Services
-
EV Group’s comprehensive process knowledge is a result of our decades of experience. This knowledge creates benefits and advantages for our customers from the early stages of process development to the final goal of high-volume production where our process engineering services offer comprehensive technical support and advice to the semiconductor industry. With state-of-the-art application labs at our headquarters in Austria, along with North America and Asia, EV Group is focused on delivering superior process expertise to our growing global customer base every step of the way. We can provide support for initial development through final integration at the customer’s site. Process know-how is key to achieving the shortest time to market for your product.
-
Product
Modbus Controllers
-
Datexel has a range of Modbus RTU Masters, Slaves, Controllers, Data Loggers and Modbus remote displays. The DAT9000 is a Modbus RTU Master with RS485, RS232 and Ethernet Interfaces. The DAT9000IO is similar to the DAT9000 but it has digital input and outputs. The DAT9000DL has an additional Data Logging facility and the DAT9000DLIO has both Data Logging and digital IO. The DAT9011 is a Modbus Master with 2 analog inputs which can chose from Thermocouple's, RTD's, Potentiometers, mA and mV's. It also has 2 outputs which can be mA or voltage. The DAT9011 can also accept digital inputs and provide 2 SPDT relay outputs. The DAT9011DL also has a Data Logging facility which can store up to 8gb of readings on a thumb drive.
-
Product
PCI CONET Controller
A2818
-
The Mod. A2818 is a 32-bit 33 MHz PCI card, which allows the control, through a standard PC, of up to 8 CAEN Optical Slave Cards (CAEN VME Bridge or Digitizers). The communication protocols used are the CONET1 or the new CONET2 (A dedicated firmware for the desired protocol must be installed on the board).
-
Product
USB Controlled Multi-Function DAQ for ATE
GT98901
-
The GXT98901 Demo board is a USB controlled, cost-effective, multi-function PCB assembly. The module is completely self-contained and includes an LCD display, measurement and stimulus resources, digital I/O, relays, and switches – all which can be accessed and monitored via the USB port using a SCPI command set via a USBTMC interface which supports the USB488 protocol.
-
Product
Traffic Control Cabinets
-
Our intelligent traffic control cabinet designs are based on the most popular features of Safetran’s Caltrans, NEMA, and ITS cabinets. The ATCC uses high-speed serial communications, providing modern features, advanced diagnostics, enhanced safety, simplified traffic control cabinet wiring, and reduced traffic control cabinet size. The ATCC Standard supports both 120 VAC and 48-volt DC signal heads, while high-density load switches and quad detector modules allow for up to 32 signal outputs and 120 detection inputs.
-
Product
Serial Production Mark Quality Control
-
The control system is based on the Sick IVC smart camera, which not only captures, but also processes the image. After training on the font samples, the system practically does not require the operator's attention in addition to setting the current marking for control. The character set can be specified by the operator or transmitted via the interface from the printer or from the enterprise information system.The camera software works autonomously: it loads all settings from the camera's permanent memory, initializes the backlight electronics and waits for a signal from the object presence sensor. When a signal is received from the sensor (an object in the shooting area), the camera captures the frame, searches for markings and analyzes the symbols for their compliance with the exemplary set.
-
Product
Source Phase Control
S96088B
-
The S96088B allows users to set calibrated, arbitrary phase differences between two signal sources running on the E5080B ENA.
-
Product
Shaker Controllers
ZET 017-U Series
-
Shaker Controllers of ZET 017-U series are represented by a software and hardware complex solutions based on FFT spectrum analyzer ZET 017 with task-specific software ZETLAB VIBRO for the control of shock and vibration impact produced by electrodynamic shaker systems. The modular principle of the system structure allows to increase the number of measuring channels from 4 up to 24.
-
Product
Process & Lab FTIR FT-NIR Analyzers
-
Using a broad spectral region from the near-infrared to the mid-infrared, our Guided Wave ANALECT® Series of FTIR/FT-NIR analyzers measure physical and chemical properties of liquids, solids and gases. They are ideal for complex refinery applications such as fuels blending and component streams applications for polymers, petrochemicals, chemicals, pharmaceuticals in addition to general manufacturing. Customers include ADNOC, BP, CITGO, CPCL, Gazpromneft, HPCL, IOCL, Orpic, Phillips 66, Rompetrol, Statoil, PBF Energy and Tesoro.
-
Product
FlexRIO Custom Instruments And Processing
-
FlexRIO Custom Instruments and Processing products provide high-performance I/O and powerful FPGAs for applications that require more than standard instruments offer. Program these products with LabVIEW to create solutions for whatever challenge you’re facing.
-
Product
Power Factor Controller
-
Rishabh Instruments Pvt. Ltd.,
Is an intelligent power factor controller for reactive power compensation. It has 4 / 6 / 8 control outputs with LED Display for target PF.
-
Product
Ethernet Controlled Relays And Relay Drivers
-
*ICS's Ethernet to Relay Interfaces provide the user with a choice of 16 contact closures or 16 relay driver outputs for driving external relays. All of the Ethernet to Relay Interfaces include 8 isolated digital inputs. Available in ICS's Minibox™ or as an OEM board.*All interfaces are VXI-11 compliant for operation with NI or Agilent VISA, LabVIEW and VEE or with RPC commands from any Linux/Unix or MAC computer. Use ICS's interactive VXI-11 Keyboard program for easy operation from your PC without having to write a program.
-
Product
Controllers
-
*Inputs for analog, digital, diagnostic and pulse signals*Digital, PWM or current-controlled outputs*Programmable to IEC 61131-3 with CODESYS*High-performance CAN interface for various communication tasks*E1 type approval (German Federal Motor Transport Authority)
-
Product
Isolated Controller Area Network (CAN)
-
ADI isolated controller area network (CAN) transceivers provide the differential physical layer interface between the data layer link, hardware protocol (for example, embedded in some of ADI's Blackfin® processors), and the physical wiring of the CAN bus. ADI's portfolio includes transceivers with integrated iCoupler® and isoPower® isolation, providing, fully isolated off-the-shelf CAN PHY's.
-
Product
Control Panels
-
Watlow Electric Manufacturing Company
Control panels designed to link with Watlow immersion and circulation heaters
-
Product
Analog PID Controller
SIM960
-
Stanford Research Systems, Inc.
The SIM960 Analog PID Controller is a unique instrument intended for the most demanding control applications. It combines analog signal handling with digital control, giving you the best of both worlds.
-
Product
RF Power Controller (ALC)
310-010030-004
-
The serial controlled ALC module is used to set and monitor the output level of your fixed gain RF amplifier. The module is available for many bands between 800 MHz and 3 GHz, and is configured and calibrated to meet your requirements.
-
Product
GSM Controller
ARC-10
-
Infinite Industrial Informatics Lt
ARC-10 is a top quality, easy to use GSM controller for alerting and remote control using SMS.
-
Product
Computer Controlled Photoreactors
CCP
-
Luzchem has developed the latest in exposure chamber technology. Our new computer controlled photoreactors (CCP-4V and CCP-ICH2) are fully computerized using a USB interface. These photoreactors will automatically log exposure conditions and optics used. New integrated power sensor will also log the intensity of the light output. Ideal for pharmaceutical testing and any other industry with stringent documentation requirements.
-
Product
GPIB-RS232, Instrument Control Device - United Kingdom 240VAC
779732-06
GPIB Controller
The GPIB‑RS232 is an IEEE 488 controller device for computers with an RS232 port. You can use this device to integrate an instrument into your system using GPIB. This device transforms a computer with an RS232 serial port into a talker, listener, or controller on the GPIB bus. It can also interface RS232 instruments and peripherals to the GPIB bus. It can implement the physical and electrical specifications of the IEEE 488 and RS232 standards, as well as interpret and execute high-level commands from the serial port, including RS232‑to‑GPIB and GPIB‑to‑RS232 protocol conversions. This device is IEEE 488.2 compatible. The device includes a license for the NI‑488.2 driver software, providing maximum reliability for connecting to third-party instruments with GPIB.
-
Product
High Flexibility Test Controller Card
TCC 1800-UE
-
The TCC1800-UE Test Controller Card is a generic control board for production testing of printed circuit boards (PCBs). The board is controlled by a command language on a PC to which it is connected via Ethernet.The TCC1800-UE is designed to work with positive voltages up to 24V. The card provides extensive IO: Analog and digital interfacing, counters, PWM outputs, bidirectional I/O, ethernet-, CAN, USB, SPI and I2C interfacing.
-
Product
Inline Process Refractometer – Smart, Rugged, Flexible
MVP™ Series
-
The MVP (“Most Valuable Process”) inline process refractometer is a rugged industrial refractometer equipped with MISCO’s latest SMART-sensor technology for automated continuous measurement of process fluids. This sensor is an industrial workhorse with wide operating temperature and pressure limits and a wide measurement range.
-
Product
Industrial Inline Process Refractometer – 2″ Tri-Clamp Fitting
VIP2
-
The MISCO VIP2 (“Very Important Process”) inline process refractometer showcases the latest advancements in smart-sensor technology. Housing the intelligence for processing and communication in the sensor itself, the VIP2 refractometer eliminates the need for an external control box. The stainless steel sensor head and sapphire measuring surface are designed to survive the toughest environments. The sensor mounts to your processes using an industry standard 2” Tri-Clamp fitting.
