Board Test Fixtures
jigs which hold, align and engage pcb with test interconnect.
See Also: Fixtures, Test Fixtures, Bare board Fixtures, PCB Test Fixtures, Genrad Fixtures
-
Product
Field Test
-
Field test equipment is an optimised solution for large system testing, which, thanks to its distributed architecture, enables the placement of several small-sized testing systems.
-
-
Product
Multifunction I/O Boards
Multifunction I/O
NAI offers a variety of rugged embedded boards - both Multifunction IO Cards & Single Board Computers in OpenVPX, cPCI, VME and PCI/PCIe form factors. When combined with our smart function modules they have the ability to meet a wide range of complex and time-critical sense and response requirements for I/O-intensive, mission-critical applications.
-
Product
Pneumatic Test Adapter
-
Pneumatic test adapters from INGUN are particularly suitable for contacting medium-sized electronic assemblies (series testing) and a large number of variants. The test adapters are designed as a replacement kit system, are connected to an existing test system and operated with replacement kits that are specially designed for the electronic assembly to be tested.
-
Product
Flexible Test Connectors
-
Pin and socket sizes 22, 20, 16, 12 and 8 conform to MIL Spec dimensions. Whenever connector reliability is important, you’ll find NASA-approved FLEXCON test connectors. Applications include electronic, electrical and communications systems, computers, space vehicles, missiles, aircraft and other military equipment.
-
Product
Automation Of Vibration Testing
-
The system can be equipped with various National I / O devices using PCI, PXI, USB and cRIO platforms for both testing tasks and for advanced diagnostics of the tested products. The system software includes a wide range of virtual instruments (Vibrotest, Vibration, Vibrotest SBC, Vibrorezonans, Beat, etc.).
-
Product
ATE Test Probes
-
For contacting loaded PCBs in automatic test equipment (ATE) with vacuum, pneumatic or mechanically operated fixtures. Available in 2.54mm, 1.91mm & 1.27mm test centre spacings.
-
Product
Actuation Methods for In-Circuit Test Fixtures
-
Commonly referred to as In-Circuit Test (ICT), loaded board test can be defined as the task of measuring values of components that have been installed on a printed circuit board (PCB). A second basic category of loaded board test measures simple open and shorts on the board to verify manufacturability standards. Circuit Check supports all forms of in-circuit test strategies with its Performance Grade and Value Line test fixtures.
-
Product
PC/104 OneBank Board
EMC2-ZU2CG
-
Sundance Multiprocessor Technology Ltd.
The PCIe/104 OneBank™ design enables the EMC²-ZU2CG to be added to robust and rugged installations for various commercial, medial, industrial and military uses and to enable more versatility the EMC²-ZU2CG also incorporates a VITA57.1 FMC™ LPC connector opening up an range of extra possibilities and expansion options.
-
Product
3U VPX Power Interface Board VITA 62
106PIBC301-0000R
-
3U Convection Cooled VPX Power Interface Board, VITA 62 compliant. Power Interface Boards (PIBs) facilitate the use of pluggable power supplies and headers with the power section of the backplane.
-
Product
EV &Recharging Testing
-
PONOVO has long-term follow-up technology in China and abroad. Based on its own mature intelligent power detection equipment, and according to its own advantages in the field of new energy, PONOVO could be able to provide users with professional new energy test system solutions. In the field of electric vehicle technology, the electric vehicle charging facility detection platform based on the Internet cloud platform was introduced. This platform is one of the few domestic testing platforms that can automatically test the charging piles for network inspection, project acceptance, and factory testing. The platform has the advantages of automatic testing, low usage threshold, and high integration. It is widely used in the detection of relevant charging facilities in more than 20 provinces and cities in China, effectively meets the inspection of electric vehicle charging stations, and provides powerful technical support for the site acceptance test of charging stations.
-
Product
Testing Tool Development
-
We can create a custom software testing tool for your needs.As developers who love testing, we invest in R&D, combining our product testing and software development expertise to deliver customized testing solutions for you, utilizing open source stacks combined with Artificial Intelligence for added power.
-
Product
Alchitry Au FPGA Development Board (Xilinx Artix 7)
-
The Alchitry Au is the "gold" standard for FPGA development boards and it's possibly one of the strongest boards of its type on the market. FPGAs, or Field-Programmable Gate Arrays, are an advanced development board type for engineers and hobbyists alike to experience the next step in programming with electronics. The Au continues the trend of more affordable and increasingly powerful FPGA boards arriving each year. This board is a fantastic starting point into the world of FPGAs and the heart of your next project. Finally, now that this board is built by SparkFun, we added a Qwiic connector for easy I2C integration!
-
Product
Optics Test Systems
Electronic And Visual Autocollimators
-
Optik Elektronik Gerätetechnik GmbH
OEG GmbH specializes in the use of autocollimators, collimators and telescopes for special applications in optical measurement technology in the wavelength range from 380nm to 1550nm (SWIR).
-
Product
Triaxial Test Set
-
Two measuring methods are used for measurement of screening efficiency - Transfer impedance, Screening attenuation. EC (European Cabling) Group of DELTA has during the last years supplied many customers with test fixtures for measurement of transfer impedance. The use of the fixture has now been extended to comprise screening attenuation measurement according to the triaxial method.
-
Product
Temperature/Humidity Testing
-
Quest has 14 environmental chambers ranging in size from 1 cubic foot to over 1,000 cubic feet, covering temperatures from below -100C to temperatures exceeding 200C. Our temperature/humidity test chambers include one of the largest walk-in chambers (15 x 10 x 8 ft) in New England, table top, high humidity, thermal shock, and high ramp rate test chambers. We can provide a wide range of temperature/humidity conditions on a variety of different product shapes and sizes, from extremely small to large products.
-
Product
test measurement unit
ITC59100 Rg/Qg
-
The ITC59100 Test Measurement Unit (TMU), which plugs into the ITC59000 Test Platform, performs gate charge (Qg) measurements that conform to MIL-STD-750C, Notice 2, Method 3471 and JEDEC Standard JESD24-2. In addition the ITC59100 TMU performs an internal gate resistance (Rg) test method that conforms to JEDEC Standard JESD24-11.
-
Product
SF6 Gas Testing
-
Weshine Electric Manufacturing Co., Ltd
SF6 quantitative leak detector is an ideal tool and method for sf6 gas trace leakage inspection. It has the advantages of fast, convenient, reliable, and low maintenance cost.
-
Product
Physical Test Equipment
-
When assessing a coating for suitability for a particular application the testing of the physical properties such as bendability, impact resistance, hardness, washability and abrasion resistance are all required to provide information for decision making. Testing of the pigments using fineness of grind gauges, determining the specific gravity of the coating using density cups, measuring the viscosity using viscosity cups or rotational viscometers and assessing the drying time all provide information for the coating technical data sheets.
-
Product
Test Programming
TestAssistant II
-
From a front-end graphical user interface to a back-end relational database, TestAssistant II organizes and maintains everything necessary for testing. Tester interfaces, wires, connectors, adapter cables, and other complex sub-assemblies are graphically represented.
-
Product
Evaporative Emissions Testing
GASERA ONE SHED
-
Evaporative losses from the fuel system are tested for vehicle certification. GASERA ONE SHED allows direct monitoring of evaporative emissions as part of the qualification testing procedures for vehicles. The GASERA ONE SHED’s photoacoustic technique is approved by the Environmental Protection Agency (EPA) and the California Air Resources Board (CARB).
-
Product
Test Automation
-
Deployment ramping up pressure on the test organization to validate products in shorter test cycles. We have assisted Tier – 1 companies in the BFSI, Cloud Solutions and Communication domains to deploy highly efficient test strategies. Talk to our engineers to see how we can assist your business.
-
Product
6U Single Board Computer
VP62006
-
LinkedHope Intelligent Technologies Co.,Ltd.
VP62006 is a 6U VPX single board computer designed by LinkedHope® based on Intel® QM87 chipset. The compact and space-saving processor board meets the VITA46.0 specifications. There are SATAIII, USB3.0, Gigabit Ethernet, PCIe3.0 and Keyboard/Mouse interfaces on the board. VP62006 supports 64GB SSD, facilitating the operating system installing.
-
Product
SMD Test Fixture
16034G
Test Fixture
Perform impedance evaluation on a minimum SMD size of 0.6(L) x 0.3(W) [mm]
-
Product
Optics Test Systems
Front Window Scanner For Wedge Angle Measurement
-
Optik Elektronik Gerätetechnik GmbH
Scanning of complete automotive windshields to measure the wedge angle and thickness change, especially in the HUD area.
-
Product
Battery Test System
WBCS3000Le32
-
Low current model32 channel battery cycler (expandable up to 128 channels)No. of minimum channel : 16 channelsmax. voltage range : -1V to 5Vmax. current range : ±1A
-
Product
Wire Damage Test Device For Pull Testing
IEC60884 FIG11
-
Shenzhen Chuangxin Instruments Co., Ltd.
IEC60884 FIG11 Wire damage test device for pull testingThe wire damage test device is a special test instrument designed and manufactured according to the requirements of IEC884 Figure 11, , etc. It is mainly used to judge whether the screw-clamp type terminal is in design and structure.
-
Product
Vibration Testing
-
AMERICAN TESTING LABORATORY tests electronic components and end use products for the defense, automotive, military, aerospace, commercial and government agencies.
-
Product
Penetration Testing
-
Tailored penetration testing scenarios to challenge common attack vectors and unique environments.
-
Product
Test Programming
-
Terotest offers a full test programming service for all of our Automatic Test Equipment. In many cases test programs can be generated from CAD data on the product or component under test, or from autolearn facilities within the test system. Such techniques maximise accuracy and test program fault coverage, and allow quick and easy test program generation.
