Product

SINE M-19 Sinusoidal Array

-

Applied Image, Inc.

Applied Image, Inc.

The Sinusoidal Array SINE M-19 is a remarkable new test array that achieves 256 cycles per mm while maintaining a significant modulation. It is designed for testing high resolution optical systems such as microscopes. Because its maximum width is 7.5mm, the SINE M-19 is small enough to fit easily onto a standard microscope slide (the TM-G variation is mounted in glass).

Product

Marshall

-

infraTest Prüftechnik GmbH

infraTest Prüftechnik GmbH

Automatic Marshall compressor consisting of frame with wooden block, stable holding device for the mold set and hoisting device for the monkey. The drop weight is raised by a chain and an electric gear motor to the drop height of 457 mm.

Product

AUTOMATED POWER SUPPLIES/SWEEPERS FOR BWO

-

Insight Product Company

Insight Product Company

nsight Product Company offer Automated Power Supplies/Sweepers specially designed to control mm- and sub-mm wave BWO sources. Those power supplies provides:*highly stable regulated voltages for slow wave structure (anode), filament/heater and control electrodes;*special design to simplify operation with BWO or WRO tubes;*special design to protect tubes during Start/Stop;*unique possibility for fast frequency sweep within entire frequency band;*possibility to use tubes within a PLL frequency stabilization system;*digital control and digital indication of output frequency;*built-in IEEE-488 interface;*multiple possibilities to control output frequency

Product

COM Express Type 6 Compact Module With Intel® Atom® X5 And X7 Processor

CEM312

-

Axiomtek Co., Ltd.

CEM312 - Axiomtek Co., Ltd.

The CEM312 supports Intel® Atom® x5 and x7 processors in a board size of 95 x 95 mm. It has two 204-pin DDR3L-1600 SO-DIMMs with up to 8GB of system memory and an optional eMMC for a maximum of 64GB memory. The COM Express Type 6 module is integrated with Intel® Gen 9 graphics and supported with DX12.0, OCL 2.0 and OGL 4.3 for immersive graphics and media performance with a resolution up to 4K. Moreover, the industrial grade system on module can operate under wide temperature ranging from -40 to 85°C (-40°F to 185°F). The Intel® Atom®-based computer module also offers diverse comprehensive I/O interfaces to meet requirements for a variety of industrial applications. The CEM312 can serve as an excellent solution for graphics-intensive, industrial IoT applications such as industrial control, medical imaging, digital signage, gaming, military, and networking.

Product

RF Hybrid Couplers

-

Pasternack Enterprises, Inc.

Pasternack Enterprises, Inc.

Pasternack RF hybrid coupler series is passive devices that couple part of the transmission power in a transmission line. Our RF hybrid coupler components provide the bandwidth, high directivity and high power that designers need for their most demanding applications. 90 degree hybrid couplers often use two transmission lines set close together so that energy passing through one is coupled to the other. Many Pasternack 90 degree hybrid coupler items are RoHS and REACH compliant. Our RF hybrid coupler series is available with SMA connectors and 3dB coupling values. Power ratings for the 90 degree hybrid coupler product line range from 20 Watts to 50 Watts. 90 degree hybrids have a frequency range that is from 1 GHz to 18 GHz. As with the other over 40,000 RF, microwave and millimeter wave components from Pasternack, this RF hybrid coupler series is in-stock. Not just in stock, but these RF couplers in a hybrid design will also ship the same day as they are purchased.

Product

High Voltage DC Lab Power Supplies 300V-5000V Output for Research Labs / Capacitor Testing – 300, 600, 1000, 3000, 5000V

-

Aplab Limited

Aplab Limited

- 19” Rack Adaptable- Laboratory Bench Unit- Digital Output Metering- Constant Voltage Current Limit Type Character- Micro Switch Provided for Protection against Shock- 3U High (133 mm)- Power Saving Thyristor Preregulator Technique

Product

SMA Connectors

-

Pasternack Enterprises, Inc.

Pasternack Enterprises, Inc.

Pasternack SMA connector category contains a large selection of part numbers, the majority are RoHS and REACH compliant. SMA connector products in this category will terminate to coax, PCB (printed circuit board) or terminal and are built to precise RF and microwave industry specifications. Our SMA connectors are constructed in male or female gender in standard polarity, reverse polarity (RPSMA / RP-SMA) or reverse thread threads, with 50 Ohm impedance. Connector SMA series from Pasternack are available in straight, radius right angle or right angle versions, as well as, press in, bulkhead, 2 hole panel, 4 hole panel or mountless options. These SMA designs include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact) attachment methods. We offer connectors in SMA series with standard or high performance levels manufactured with brass or stainless steel bodies. Other SMA connector options include quick disconnect (QD) or standard configurations. As with the other over 40,000 RF, microwave and millimeter wave products from Pasternack, this SMA connector series is in-stock. But not just in stock, also they will ship the same-day as they are ordered.

Product

Super 3.90 (111.00) - 16.00 (454.00) High Performance Lead Free Probe

LFRE-25I15-16

-

ECT

LFRE-25I15-16 - ECT

Current Rating (Amps): 8Average Probe Resistance (mOhm): 8Test Center (mil): 100Test Center (mm): 2.54Full Travel (mil): 250Full Travel (mm): 6.35Recommended Travel (mil): 167Recommended Travel (mm): 4.24Mechanical Life (no of cycles): 1,000,000Overall Length (mil): 1,300Overall Length (mm): 33.02

Product

Fast Speed Models (PCI Cameras)

xiB 64

-

XIMEA GmbH

xiB 64 - XIMEA GmbH

High-speed interface with a bandwidth of 64 Gbit / sec. CMOSIS sensor: CMV12000. Luxima sensors: LUX13HS, LUX19HS, LUX160. Gpixel sensors: GMAX0505, GMAX3265. Resolution from 1 Mpix to 65 Mpix. Speeds from 333 Fps to 3500+ Fps. Suitable for OEM customization and Embedded vision systems. Distances up to 300m over fiber-optic cable. Compact housing: 60 x 70 x 55 mm

Product

Manual Fixture Kit with Changeable Cassette, Max number of probes (2N) 1000 Units, Max UUT 450x330MM (wxd)

CMK-07

-

Columbia Elektronik AB

CMK-07 - Columbia Elektronik AB

Linear click system with ball bearings, using gas springs. 10 mm ESD-proof top cover with aluminum reinforcement bars. Steel base cabinet with detachable aluminum back and bottom panels.Detachable interchangeable case system with an 8 mm spring-loaded probe protection cover.Base cabinet fitted with a telescopic guide rail and catch.

Product

Hook Test Clip

PCM

-

Parrot Invent

PCM - Parrot Invent

The PCM Parrot hook Test Clip model is a small size hook test clip with a length of 70 mm, including the metal tip and the button.Due to this smaller size it is aimed to be used for many applications as oscilloscope ground, spectrum analyzers, data lodgers multimeter test leads and probes.

Product

Near Field Microprobe E-field 7 MHz to 3 GHz

ICR E150

-

Langer EMV-Technik GmbH

ICR E150 - Langer EMV-Technik GmbH

The near field microprobe is used to measure electric fields at extremely high resolution and sensitivity. The optimal distance to the object being measured is < 1 mm. Due to its small probe head dimension, the probe has to be moved by a manual or automatic positioning system, e.g. Langer-Scanner.

Product

In-Line Fat Measurement

FATSCAN

-

TOMRA Systems ASA

FATSCAN - TOMRA Systems ASA

TOMRA’s new FatScan fat analyzer allows for the continuous analysis of meat to precisely determine its fat content. This functional and compact machine can be easily integrated in production lines and is specifically designed to assist smaller meat processors in delivering a consistent and uniform product. The innovative FatScan can analyse both fresh and frozen meat and it measures fat in real-time, delivering highly accurate and consistent results. The hygienic and robust analyser penetrates deeply into the meat, and measures across the full 500 mm width of its conveyor belt. The design is open, so all surfaces can be visually inspected and sanitized, using high pressure water. The FatScan is able to analyse up to 7 tons of meat per hour, making it an ideal choice for small and medium size processors. This, along with the consistent end product quality and savings generated through reduced lean give-away, helps you to drive up your profits.