3D Solder Paste Inspection
checks form, height, surface area, bridges, volume, x/y offset and coplanarity of solder. Also known as: 3D SPI
See Also: Solder Paste Inspection, 3D SPI
-
Product
3D Roughness Measurement System
IF-Profiler
-
The If-Profiler is a handheld 3D roughness measurement system for high resolution measurement of surface finish. You measure roughness of flat and curved components with only one system. Measurements are performed both profile based (ISO 4287) and areal based (ISO 25178). The measurement system achieves flexible measurements and applications at high measurement speed. Various positions and measurement fields are traceably and intuitively measured. The IF-Profiler is also used to measure geometries with steep flanks and various coatings.
-
Product
3D Optical Profiler
7503
-
Chroma 7503 uses the technology of white light interfaces to measure and analyze the surface profile of micro-nano structures with sophisticated scanning system and innovative algorithms.
-
Product
Metrology & Inspection Systems
-
Our optical and e-beam wafer metrology and inspection products quickly and accurately measure pattern quality before and during high-volume chip manufacturing.
-
Product
Defect Inspection System
NovusEdge
-
The NovusEdge System provides high sensitivity inspection for the edge and backside of bare unpatterned wafers for current and advanced nodes. Multiple modules can be configured on the same automation platform for increased throughput while maintaining a small footprint for an improved cost of ownership.
-
Product
Post-Mould Inspection Machine
IV-P1000
-
The IV-P1000 is a post-mould inspection machine best known for being a fully automatic vision inspection station and for having a user-friendly GUI for operator and recipe setup. This machine is best used to inspect packages for surface defects on top and bottom.
-
Product
In-Line Inspection
Mapvision | Q
-
Inspect ALL features for EACH part you manufature within your Takt time – even for the most complex components with hundreds of features.
-
Product
Benchtop 3D Optical Profilometers
-
Compact, non-contact metrology instruments used for high-precision, sub-nanometer to micrometer-level measurement of surface topography, roughness, and step heights.
-
Product
Wireless Inspection Cameras
-
General offers three wireless inspection cameras whose probes can be disconnected from the grip and monitor. They are the DCS18HPART (with a 6mm/0.23 in. diameter articulating probe), the DCS1800HP (with a 5.5mm/0.22 in. diameter non-articulating probe), and the DCS500 (with a 9mm/0.35 in. diameter probe and a 5 in. diagonal color LCD). Wireless inspection cameras offer operating flexibility because the user can use both hands to manipulate the probe.
-
Product
3D Cameras
-
3D cameras open up an additional dimension of machine vision: in addition to length and width, you can also capture height and volume – the basis for precise dimensional inspections, surface checks, or reliable robot guidance.
-
Product
Video Inspection Station
VIS300
-
Video Inspection Stations are available with?or without on-screen measurement capabilities?and offer?an excellent way to evaluate or test small works or items in?difficult to access locations.? As todays electronic and mechanical systems keep getting smaller, it becomes impossible to test or measure these products with traditional methods. For many applications, from development to production testing, video based inspection can help maintain quality control. Many of these systems are used in labs for development or used in production for testing production samples.
-
Product
Wafer Sorter and Inspection
SolarWIS Platform
-
Eliminating the opportunity for problematic wafers to enter cell manufacturing lines greatly improves output and yield. ASM AE’s wafer sorter features 3D area inspection capability to inspect wafer thickness, total thickness variation (TTV), saw marks, as well as wafer bow and warpage. SolarWIS also includes modules that can inspect for stain, geometry, micro-cracks, edge chips, resistivity, P or N conductivity and lifetime.
-
Product
Vacuum Inspection
INDEC
-
INDEC vacuum test systems monitor a wide range of containers during the production process, including bottles, jars and cans, by measuring the cap panel concavity of their closures which is dependent on the vacuum inside. This non-contact inspection reliably identifies defective containers for automatic rejection.
-
Product
Vision Inspection System
Vision Station
-
Design and manufacture vision inspection system for SOT, SOD, TO, DPAK, SOIC, TSOP, SSOP, QFN/MLP, ODFN and LED inspection.
-
Product
Thickness and Flaw Inspection
OmniScan SX
-
Olympus is proud to introduce the OmniScan® SX, a flaw detector that benefits from more than 20 years of phased array experience and shares the OmniScan DNA. For improved ease of use, the OmniScan SX features a new streamlined software interface displayed on an 8.4 in. (21.3 cm) touch screen. A single-group and non-modular instrument, the OmniScan SX is easy to operate and cost-effective for less demanding applications.
-
Product
Property Inspection Solution
DJI / IMGING
-
Advanced DJI drone solutions for the P&C Insurance industry. IMGING™ to conduct full roof and property inspections with incredible detail in as little as ten minutes from start to finish, and they’re getting high-resolution, actionable data they can use to make informed decisions. By combining Insurance-focused workflows and patents-pending autonomous flight control technology, IMGING is making roof inspections safer, quicker, and more consistent. It’s deceptively simple, amazingly powerful, and built specifically for Insurance.
-
Product
Solder Cup Connector Kit
Y1139A
-
Used to build custom cables for 34921/23/25/31/32/33/37/38 –50-pin Dsub female – 125 V
-
Product
Fiber Inspection and Cleaning
-
Dust - just because you can't see it doesn't mean it's not there. A 1-micrometer dust particle on a single-mode core can block up to 1% of the light (a 0.05dB loss). The only way to know it's clean is to inspect it before you connect it. And if it's dirty, it needs to be cleaned with the right tools or you might just make it worse. Know it's clean with our cleaning and inspection tools.
-
Product
WiFi Inspection Cameras
-
WiFi Inspection Cameras generates a local WiFi hotspot (without Internet access) through which video clips and still photos of hard-to-reach or hard-to-see areas or equipment captured by the probe camera can be sent to an app-enabled smartphone or tablet for viewing and sharing. Free apps for iOS devices (iPhones or iPads) and Android devices are available from the iTunes App Store and Google Play Store, respectively. The three WiFi cameras differ in probe length, camera lighting and grip style.
-
Product
Universal 3D Measurement Software
Metrolog
-
Get a real performance accelerator for your 3D measuring devices and more.Not only does Metrolog X4 architecture benefit from current computer and OS technologies significantly increasing the performances and metrology software throughput, but it also simplifies your day-to-day measurement workflow.
-
Product
Inspection Microscope
Z-NIR
-
The McBain Z-NIR Near Infrared Inspection System is best-in-class for wafer-to-wafer and die-to-die alignment measurement and verification. This unique tool has been sold into many industries with various applications including sub-surface wafer and die inspection for cracks and bond integrity, MEMS, wafer bonding, 3-D chip stacking, failure analysis, process development, tool verification, part characterization, environmental testing and more.
-
Product
X-Ray Inspection System
MXI Ruby XL
-
Designed for the largest PCBs, Ruby XL allows 96 x 67 cm (37.9” x 26.4”) areas to be inspected non-destructively, with feature resolution up to 0.5 µm.
-
Product
Optical Inspection System
OIS Products
-
A manual optical inspection system that is able to inspect the wire-bonded leadframe or substrate.
-
Product
3D CT AXI
-
PCB manufacturers can enjoy comprehensive, high-speed inspection with Omron’s revolutionary technology that reliably captures defects in hidden areas.
-
Product
HDI 3D Scanners
-
Quickly capture high resolution digital 3D scansaccurately from objects in the physical world. The High Definition Imaging (HDI) 3D scanners use structured-light technology for capturing high-resolution digital 3D scans from real world objects. These systems are great for companies, manufacturers, academic institutions, visual effect studios, and research labs that need 3D scan data for visualization and measurement applications including: 3D modeling, documentation/archiving, reverse engineering, scientific measurement, computer-aided inspection, rapid prototyping/3D printing.
-
Product
X-ray Inspection System
RTX-113™
-
Glenbrook’s RTX-113 is designed for heavy production environments where X-ray is used to inspect PCBs and assembled PCBs containing advanced components such as BGA, micro BGA, QFN and other devices.
-
Product
3D AOI with Revolutionary New 3D Measurement
Zenith
-
The Zenith 3D AOI system measures the true profilometricshape of components, solder joints, patterns and even foreignmaterial on assembled PCBs with true 3 dimensional measurement, overcoming the shortcomings and vulnerabilities of 2D AOI.
-
Product
3D Measuring Systems
-
Measurement systems for mobile, laptops, tablets and other specific electronic equipment, can be achieved using hi-tech materials, such as Rohacell (as used in Aerospace Industry). innco systems 2D and 3D positioning systems are custom designed to meet each new challenge, for mobile phones to wireless network equipment.
-
Product
Tyre Inspection Systems
-
The VLT tyre inspection system can check several tyre and wheel related items, such as tread depth and sideslip. All measurements are done very fast when the vehicle is on the roller brake tester.
-
Product
Automated Optical Inspection
K Series3D
-
K Series and K Series3D are the reference in Automated Optical Inspection (AOI), allowing 2D and 3D inspection with very low false calls rate, for both pre-reflow and post-reflow. They are the most powerful gatekeepers to guarantee high quality level for the assembled PCB.
-
Product
Solder Wettability Tester
5200 Advanced
-
This is an ultra-high-sensitivity wettability tester developed to evaluate the solder wettability of ever-miniaturizing electronic components. Electronic devices, especially mobile devices, are becoming more compact and multi-functional. As the number of electronic components mounted on them increases and the pitch of connectors that connect each device increases, soldering parts are becoming increasingly miniaturized. expected to respond to further miniaturization of electronic components and miniaturization of joints in the future .
