Product

30~2600MHz Direct Modulated Optical Transmitter

-

Hangzhou Huatai Optic Tech. Co., Ltd.

Hangzhou Huatai Optic Tech. Co., Ltd.

Your product description goes here.

Product

Metallurgical/Metallographic Testing

-

Pacific Testing Laboratories

Pacific Testing Laboratories

A partial view of our Metallurgical examination areas, showing metallurgical microscopes with digital filar micrometers. These instruments, along with our cross-sectioning and polishing equipment, make the Optical Metallography facilities at Pacific Testing among the most extensive in the industry. In addition, these facilites are under the supervision of our Chief Metallurgist, with a Ph.D. in Metallurgy.

Product

FTTH Optical Node

SR201W

-

Hangzhou Softel Optic Co., Ltd.

SR201W - Hangzhou Softel Optic Co., Ltd.

SR201W is a mini in-door optical receiver with WDM that especially design for FTTP/FTTH application. High performance, low receiver optical power and lower cost is FTTH solution best selection for MSO. WDM integrated for 1550nm video signal and 1490nm /1310nm data signal in one fiber. Reflection 1490nm/1310nm for connecting ONT device. They are very suitable for PON and TV system

Product

Pocket Brinell Optical Scope

Model 35-450

-

Newage Testing Instruments, Inc.

Model 35-450 - Newage Testing Instruments, Inc.

The Newage 35-450 Pocket Brinell Optical Scope is an economical, 20X optical scope for reading Brinell impressions. Its compact design and fixed focus makes it ideal for those applications where you need a quick, but economical method for measuring the indentation.

Product

Saluki SE3001 Optical Chopper (1Hz - 10kHz)

-

Saluki Technology Inc.

Saluki Technology Inc.

SE3001 Optical Chopper is high-precision optical equipment with its chopper frequencies from 1 Hz to 10 kHz. With the advantage of PID technology and high-quality motor, the frequency accuracy of SE3001 is up to 0.5%. SE3001 consists of a console, a chopper head and a control line. The main function of the console is to control the speed of the motor to achieve the target speed. The chopper head is mainly composed of a base and a motor with a blade.

Product

Quad Optical Loss Test Set

KI27624-INGAAS-APC

-

Kingfisher International

KI27624-INGAAS-APC - Kingfisher International

A Quad Optical Loss Test Set used to test power, insertion loss, continuity and faults on multimode and single mode fiber with an APC connector at 850 / 1300 nm & 1310 / 1550 nm. In a small package, it provides a powerful solution to improve test flexibility and productivity.

Product

Optical Tweezers

PicoTweezers

-

Ionovation GmbH

PicoTweezers - Ionovation GmbH

Single or dual beam optical tweezers system based on an inverted microscope • 3D real-time video-based force measurements with sub-pN resolution • Huge free space above optical trap for all kinds of sample chambers and carriers • Manipulate and navigate trapped objects with nanometer precision • Easily extendable to fluorescence, STED, Raman spectroscopy, TIRF, or CLS.

Product

Flatness, Bow, Warp, Curvature, Glass Thickness

Standard Warp Measuring System

-

Optik Elektronik Gerätetechnik GmbH

Standard Warp Measuring System - Optik Elektronik Gerätetechnik GmbH

Optical, non contact measurement of warp and bow of specimen with size up to (1600 x 1200) mm. The system is designed for the contactless, optical measurement of the curvature (Warp) horizontal, coated float glass substrates. For that measurement the heights on different measuring points is evaluated.

Product

Robotics and Machine Vision Standards

-

Applied Image, Inc.

Applied Image, Inc.

Accuracy in machine vision systems is critical to achieving strategic goals regarding quality, efficiency, and consistency. Use our ACCUplace product lines to calibrate vision systems’ distortion, placement/alignment, or other field parameters in systems used for guidance, identification, gauging, and inspection. Using our specialized ACCUedge® technology, our Robotic and Machine Vision Standards are manufactured with line-edge quality that is second to none in the industry, providing the precision needed to calibrate almost any system. Should you need to alter feature patterns, size, or substrate to fit your needs, fill out our Optical Components and Standards form to start the conversation.

Product

Chromapoint Large Slope Angle Optical Heads

EVEREST

-

Sciences et Techniques Industrielles de la Lumière

EVEREST - Sciences et Techniques Industrielles de la Lumière

Born from the last STIL innovation, EVEREST chromatic confocal sensor head contains the best of research and development in terms of sensors.EVEREST series offers an extended measurement range with the highest performances.

Product

Variable Optical Attenuator

-

Shenzhen Golight Technology Co.,Ltd

Shenzhen Golight Technology Co.,Ltd

Variable optical attenuator uses high-precision attenuation control components, and combines a selfdeveloped embedded data processing platform and precise calibration process, can be provided with maximum 60dB optical power attenuation and optical power monitoring function. Real-time display of input and output optical power.

Product

PXI Express High Speed Optical FPGA Board

HSS-8324

-

Conduant Corporation

HSS-8324 - Conduant Corporation

The Conduant HSS-8324 Optical FPGA board provides the user with a hardware platform that is able to sustain full-duplex high-bandwidth transfers through its 8-lane Gen3 PXI Express (PXIe) interface and its 24-lane optical interface. The PXIe interface provides a theoretical maximum throughput of 8GB/s (simultaneous in and out).

Product

High-Power InGaAs Optical Head

81626C

-

Keysight Technologies

81626C - Keysight Technologies

The new 81626C high-power optical head provides a 5 mm detector area and allows flexible placement of the remote optical power meter, which is then connected to the N7749C. The 81626C accepts parallel beams with up to 4 mm diameter, standard SM fiber and MM fiber with max. 100 μm core diameter, NA ≤ 0.3. A wide choice of adapters allows input from popular fiber connector types, bare fibers or open beams. The magnetic D-shaped adapters allow rapid removal and replacement without twisting attached fibers.

Product

Optical Mixed Signal Devices

-

Analog Devices Inc.

Analog Devices Inc.

Analog Devices optical mixed signal devices comprise a portfolio of highly integrated analog front ends and integrated optical modules. The discrete analog front ends offer flexibility in optimizing a given solution. The integrated optical modules are highly optimized for applications such as vital signs monitoring in smart watches and other wearables and offer very small form factors and reduce the required systems engineering to get to market.

Product

Portable Optical Power Meter

CARY-PM300

-

UC Instruments, Corp.

CARY-PM300 - UC Instruments, Corp.

The CARY-PM300 portable Optical Power Meter is a newly designed fiber optic tester,which aims at the installation, engineering acceptance and maintenance of fibernetwork. Combined with CARY-LS300 handheld optical light source, it offers a quickand accurate testing solution on both SM and MM fibers.

Product

32 Channel Optically Isolated Digital Card

104-IDIO-16

-

Acces I/O Products, Inc.

104-IDIO-16 - Acces I/O Products, Inc.

The Model 104-IDIO-16 is a 32-channel PC/104 utility board featuring 16 optically isolated inputs and 16 optically isolated solid state outputs. The isolated, non polarized inputs may be driven by either DC sources of 3-31V (or higher by special order) or AC sources at frequencies of 40Hz to 10KHz

Product

Optical Light Sources

FLS200 Series

-

Shanghai Tarluz Telecom Tech Co., LTD

FLS200 Series - Shanghai Tarluz Telecom Tech Co., LTD

FLS200 Optical Light source could provide maximum 4 wavelengths in one unit, customer could select arbitrary four output wavelengths from 650nm, 850nm, 1300nm, 1310nm, 1490nm, 1550nm. The unit support Single mode and Multimode (50/125um or 62.5/125um MM fiber) optical cable in one unit. It could support FC, SC, ST, LC and 2.5mm universal optical connector.

Product

Real Time DSP Software

ATS-GPU

-

AlazarTech

ATS-GPU - AlazarTech

ATS-GPU is a software framework developed by AlazarTech to allow users to do real-time signal processing using an Open CL compatible Graphical Processing Unit (GPU). Input to the GPU can either come from an AlazarTech PCI Express waveform digitizer or from user-supplied data. Fundamentally, ATS-GPU solves the problem of transferring data from a waveform digitizer to a GPU at very high speeds. A floating point FFT routine built into ATS-GPU has been benchmarked at 235,000 FFTs per second for 2048 points on one input. Ideal for Optical Coherence Tomography (SS-OCT). Benchmarks also showed that users can keep up with 500 MS/s sampling on one channel for 2048 point streaming FFTs.

Product

Ultrasonic Optical Flaw Detector

MIV-X

-

Shimadzu Corp.

MIV-X - Shimadzu Corp.

Thanks to Shimadzu’s proprietary light imagining technique, which combines an ultrasonic oscillator with a stroboscope, defects near the surface of a material, including peeling of the bonding and adhesive surfaces of heterogeneous materials, as well as paint, thermal sprays, and coatings can be inspected easily and non-destructively.

Product

Main Effects

-

Morley

Morley

The Analog Multi FX is an Authentic Analog Multi Effects Pedal equipped with everything you need to get the job done on stage and in the studio. It’s got a Switchless Optical Wah, Distortion, Effects Loop, Stereo Chorus, and Echo. Even better these are reissues of classic Morley circuits leading all the back to the 1970’s. And speaking of the 70’s it also has a new finish that pays homage to the original chrome Morley pedals. It’s Heavy-Duty spun stainless steel that’s Built like a Tank and looks great under stage lights. Each one is hand spun at our Illinois facility.

Product

Optical Isolators

-

Thorlabs, Inc.

Thorlabs, Inc.

Thorlabs manufactures a wide selection of narrowband and broadband free-space optical isolators (Faraday isolators) that operate in spectral ranges from 365 nm to 9.80 µm, including high-power options, as well as fiber isolators designed for wavelength ranges from 650 to 2010 nm for polarization-independent versions and 770 nm to 2010 nm for polarization-dependent versions. For customers whose needs are not met by our stock selection, we offer a custom isolator service that can combine the best features across our entire isolator family. The Optical Isolator Selection Guide displays wavelength ranges and isolator types for all stocked isolators.