Carriers
VadaTech carriers are available in a wide range of mezzanine styles and formats, including versions to enable you to adapt different buses and architectures. These carriers are designed to enable you to build a complete system using best-in-class building blocks or legacy products regardless of the form factor.
-
Unlisted Product
PCIe Gen3 Module For PCIe Bus Expansion
PCI123
-
The PCI123 is VadaTech’s 3rd generation PCIe expansion module based on the PCI-SIG specification. The board is a high-speed bridge from the host PCIe bus to VadaTech’s UTC006 PCIe Gen 3 x16 MCH.
-
Unlisted Product
Multiport Serial Adapter, PCIe X4
PCI325
-
The PCI325 is an RS-422 synchronous/asynchronous multiport serial adapter. The module can accept a clock input to synchronize the baud rate generators of each port to an external clock. All the protocol management overhead is taken care of in the hardware so that the host CPU is offloaded from managing the detailed serial protocol.
-
Product
PCIe Gen3 X16 Bus Expansion Via Dual X8 OCuLink (as A Single Combined X16) Via Rear I/O
PCI124
-
The PCI124 is one of VadaTech’s 4th generation PCIe expansion module based on the PCI-SIG specification. The Module has a Retimer/Conditioner to improve signal integrity for enhancing system performance and reliability across long cables. It removes both random and deterministic jitter from the input signals eliminating inter-symbol interference and resets the output jitter budget. It supports the full 16 lanes.
-
Unlisted Product
PCI Carrier For PMC, PrPMC And PIM Modules
PCI100
-
The PCI100 is a PCI bus carrier that allows testing and evaluation of PMCs, PrPMCs and PIMs in a manufacturing or lab environment. The PCI100 routes the 64-bit PCI bus from the edge connector directly to the PMC/PrPMC. The trace lengths from the PCI bus to the PMC/PrPMC connectors are kept at a minimum so the PMC/PrPMC can run at the PCI-X133MHz clock speed.The J4 connector of the PMC/PrPMC site is routed to the PIM site connector per the VITA 36 specification. This gives manufacturers the ability to use the PCI100 to test and verify PIMs. In addition, the PCI100 has the a 96-pin DIN connector (P2) routed to the J4 connector per the VITA-35 specification.The PCI100 has a fan mounted on the board to cool the PMC/PrPMC. The fan is easily removed for testing and probing of the PMC/PrPMC.
-
Product
PCI-X Carrier For AMC Modules
PCI102
-
The PCI102 allows testing of AMC.1, AMC.2 and AMC.3 modules in a PC environment during development and manufacturing; reducing the costs associated with maintaining different platforms. The PCI101 is a PCI-X edge style carrier with PCIe x4 lanes going to the AMC module. The AMC.1 module connects to the host PC’s PCI-X bus via a PCI-X to PCI ebridge. The AMC.2 module’s GbE ports are routed to RJ-45s. The AMC.3 differential pairs are routed to two SATA connectors. ThePCI102 is available with an optional VT001 IPMI controller which can test the AMC IPMI management functionality. The dual I2C bus connectors allow for connecting any I2C bus to any other I2C bus as well as being able to debug and monitor the I2C bus traffic. Provides two current sense resistors to measure the payload power as well as the management power of the AMC. The PCI102 can be powered on the bench without the host PC.
-
Product
PCIe Carrier For PMC And PrPMC
PCI104
-
The PCI104 is a PCIe carrier for PCI Mezzanine Cards (PMC) or Processor PCI Mezzanine Cards (PrPMC). The PCI104 carrier allows simplified testing of PMC/PrPMCs and their associated PMC I/O Modules (PIMs) by using a PC environment during board development or deployment. The PCI104 can also reduce the costs of manufacturing PMC/PrPMCs by allowing manufacturers to use off-the-shelf PCs for functional testing. The PCI104 converts the PCIe x4 edge connection to PCI-X via a PCIe to PCI-X bridge. The trace lengths to the PMC/PrPMCare kept to a minimum so the PMC/PrPMC can run with a133MHz PCI-X clock speed. The J4 connector of the installed PMC/PrPMC is routed to a 96-pin DIN connector per theVITA-35 specification. The PCIe to PCI-X bridge can run in either transparent or non-transparent mode and can also operate in forward or reverse mode. The PCI104 has a fan mounted on the board to cool the PMC/PrPMC. The fan can easily be removed for testing and probing of hosted card.
-
Unlisted Product
Carrier For AMC Modules
PCI106
-
The PCI106 allows testing of AMC.1, AMC.2, AMC.3 and/or AMC.4 modules in a PC environment (or stand alone) during development and manufacturing; reducing the costs associated with maintaining different platforms.The PCI106 is a PCIe edge style carrier with x4 lanes routed to from the AMC to the PCIe edge style. The AMC.1 module can connect directly to the host PC PCIe bus. The AMC.2 module GbE ports are routed to RJ-45s. The AMC.3 differential pairs are routed to two SATA connectors. The PCI106 is available with a socket for an optional VT002 Shelf Manager which can test the AMC IPMI management functionality. The Dual I2C bus connectors allow connecting any I2C bus to any other I2C bus as well as being able to debug and monitor the I2C bus traffic.Provides two current sense resistors to measure the payload power as well as the management power of the AMC.The PCI106 can be powered on the bench without the host PC.
-
Unlisted Product
Carrier For AMC Modules
PCI107
-
The PCI107 allows testing of AMC.1, AMC.2, AMC.3 and/or AMC.4 modules in a PC environment (or stand alone) during development and manufacturing; reducing the costs associated with maintaining different platforms.The PCI107 is a PCIe edge style carrier with x8 lanes routed to from the AMC to the PCIe edge style. The AMC.1 module can connect directly to the host PC PCIe bus. The AMC.2 module GbE ports are routed to RJ-45s. The AMC.3 differential pairs are routed to two SATA connectors. The PCI107 is available with a socket for an optional VT002 Shelf Manager which can test the AMC IPMI management functionality. The Dual I2C bus connectors allow connecting any I2C bus to any other I2C bus as well as being able to debug and monitor the I2C bus traffic. Provides two current sense resistors to measure the payload power as well as the management power of the AMC.The PCI107 can be powered on the bench without the host PC.
