Chroma Systems Solutions, Inc.

Product

Partial Discharge Tester

19501-K

-

Chroma Systems Solutions, Inc.

19501-K - Chroma Systems Solutions, Inc.

The Chroma 19501-K Partial Discharge Tester is an instrument equipped with AC hipot test and partial discharge detection functions, providing 0.1kV~10kV of AC output, 0.01μA~ 300μA of leakage current, and 1pC~2000pC partial discharge detect ion range for measurement. Chroma 19501-K Partial Discharge Tester is compliant to the IEC60270-1 standard in particular the partial discharge testing requirements for high voltage.

Product

Digital Multimeters

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

Chroma’s Digital MultiMeters – DMMs – are ideal for electronic and electrical testing in automotive, aerospace, HVAC, and commercial production and benchtop applications.

Product

Chroma Milliohm Meters

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

The Chroma 16502 Milliohm Meter is Chroma’s newest digital Milliohm Meter. 0.001mΩ~1.9999MΩ wide measurement range. DC, Pulsed, and Dry-circuit test current driving modes, enable the Chroma 16502 can be properly used in DC resistance measurement for various inductive components (coil, choke, and transformer winding etc.), cable, metallic contact (connector, relay switch etc.) and conduction materials.

Product

Safety

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

The purpose of safety testing medical electronic equipment is to be sure that a device is safe from electrical hazards to the patient and caregivers. There are a number of UL, European and Canadian standards that serve as the ruling body on how medical products will be tested, one in particular, IEC60601 (the International Electrical Safety Standard for medical electronic equipment) is experiencing “global harmonization,” meaning it has been accepted and implemented around the world. The IEC60601 standard is mainly intended for product development where safety considerations must be taken into account early in the design phase of a product, however much of it is applied to production line testing since it is the only way for a manufacturer to be sure they are shipping safe product.

Product

LED Power Driver Test System

Chroma C8000

-

Chroma Systems Solutions, Inc.

Chroma C8000 - Chroma Systems Solutions, Inc.

The Chroma 8491 ATS is equipped with optimized standard test items for LED driver testing (lighting & TV backlight). The user is only required to define the test conditions and specifications for the standard test items to perform the test.

Product

Benchtop DC Electronic Load

63000

-

Chroma Systems Solutions, Inc.

63000 - Chroma Systems Solutions, Inc.

The 63000 series programmable DC electronic loads are reliable, precision instruments primarily designed to test switching power supplies, A/D power supplies, power electronic components, adapters, 3C batteries and chargers. Its maximum 350W rated power makes it suitable for testing numerous types of lower power devices.

Product

Battery Cell Insulation Tester

Chroma 11210

-

Chroma Systems Solutions, Inc.

Chroma 11210 - Chroma Systems Solutions, Inc.

Chroma 11210 battery cell insulation tester is an instrument used for accurately measuring leakage current (LC) and insulation resistance(IR) of battery jelly-roll/dry-cell as well as other insulation materials. In addition to standard LC/IR measurement, the 11210 has a unique function that detects partial discharge (PD) or flashover that may have occurred inside the insulation material during the high voltage insulation testing process.

Product

50Hz-100kHz LCR Meter

11022/11025

-

Chroma Systems Solutions, Inc.

11022/11025 - Chroma Systems Solutions, Inc.

0.1% basic accuracyTransformer test parameters (11025), Turns Ratio, DCR, Mutual Inductance0Hz, 60Hz, 100Hz, 120Hz, 1kHz, 10kHz, 20kHz, 40kHz, 50kHz, 100kHz test frequencies21ms measurement time (≥100Hz)Agilent 4263B LCR Meter commands compatible4 different output resistance modes selectable for non-linear inductor and capacitor measuringHigh resolution in low impedance(0.01mΩ) and high accuracy 0.3% till 100mΩ rangeAdjustable DC bias current up to 200mA (constant 25Ω) (11025)1320 Bias Current Source directly control capability0.01mΩ ~ 99.99MΩ wide measurement range (4 1/2 digits)Dual frequency function (11022 option) for automatic productionBIAS comparator functionComparator function and 8/99 bin-sorting functionPass/fail judge result for automatic productionHandler interface trigger edge (rising/falling) programmableTest signal level monitor functionStandard RS-232, GPIB, and Handler I/FOpen/short zeroing, load correctionLabView® Driver

Product

Regenerative Grid Simulators 9kVA-15kVA

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

Four quadrant, single- or three-phase AC power sources designed to simulate real-world grid characteristics for EV, PV inverter, and smart-grid test applications.

Product

Electrical Safety Analyzer

19032

-

Chroma Systems Solutions, Inc.

19032 - Chroma Systems Solutions, Inc.

Our Electrical Safety Analyzers combine Hipot, Insulation Resistance ( IR), Ground Bond (GB), Leakage Current (LC)/AC LC/DC LC, and Dynamic Function Tests. Savings can be up to 50% of production line space by not having to purchase and rack several safety test instruments. It also increases efficiencies of electrical safety testing and reduces associated labor costs.

Product

Programmable Benchtop DC Power Supply

62000L

-

Chroma Systems Solutions, Inc.

62000L - Chroma Systems Solutions, Inc.

Provides high quality yet cost effective programmable benchtop DC power, designed to meet the stringent requirements of the next generation of power electronics.

Product

DC Power Supply

62000H

-

Chroma Systems Solutions, Inc.

62000H - Chroma Systems Solutions, Inc.

Chroma’s new 62000H Series of programmable DC Power Supplies offer many unique advantages for telecom, automated test system & integration, industrial, battery charge & simulation for hybrid cars and solar panel simulation. These advantages include a high power density of 15KW in 3U, precision readback of output current and voltage, output trigger signals, as well as the ability to create complex DC transients waveforms to test device behavior to spikes, drops, and other voltage deviations. For high power applications, parallel up to 10 units for up to 150kW.

Product

1U Programmable DC Power Supply

Chroma 62000E

-

Chroma Systems Solutions, Inc.

Chroma 62000E - Chroma Systems Solutions, Inc.

Provides a single channel of 1.7kW, 3.4kW, 5kW and three channels of 1.7kW output configured in 1U chassis

Product

Solar Array Simulator DC Power Supply

62000H-S

-

Chroma Systems Solutions, Inc.

62000H-S - Chroma Systems Solutions, Inc.

Solar Array Simulator DC Power Supplies by Chroma provide programmable simulation of Voc (open circuit voltage) up to 1800V and Isc (short circuit current) up to 30A. The 62000S-H series provides an industry leading power density in a small 3U high package. The Solar Array Simulator is highly stable and has a fast transient response design, which are both advantages to MPPT performance evaluation on PV inverter devices.

Product

Automated Test Systems

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

From power conversion to battery to electrical safety, our test systems will maximize your time, improve your validation process, and increase your throughput.