Chroma Systems Solutions, Inc.

Product

3-Phase Programmable AC Source

61700

-

Chroma Systems Solutions, Inc.

61700 - Chroma Systems Solutions, Inc.

Power: 1500VA, 3 (61701); 3000VA, 3 (61702); 4500VA, 3 (61703); 6000VA, 3 (61704); 12000VA, 3 (61705)Voltage: 0~150V/0~300VFrequency: 15~1.2KHzPhase angle: 0~360Built-in PFC, provides input power factor over 0.98Advanced PWM technology delivers high power density in a compact rack-mountable packageBuilt-in output isolation relaysAC+DC output modeProgrammable slew rate setting for changing voltage (optional function)Turn on, turn off phase angle controlUser-definable power-on statusPower line disturbance (PLD) simulation capability (optional function)Comprehensive measurement capability: V, Irms, Ipk, I inrush, P, PF, CF of current etc.Programmable r.m.s. current limitFull protection: OP, OC, OV and OT protectionGPIB and RS-232C interface (optional)Easy-use software for operation

Product

Medical System

Sentinel I

-

Chroma Systems Solutions, Inc.

Sentinel I - Chroma Systems Solutions, Inc.

The Sentinel I System provides fully automated Electrical Safety Testing to IEC/EN/UL/CSA 60601-1. This system is ideal for testing medical products with one or no patient connections or low volume production where operators can manually change leads between different patient connections. This is a 5 in one Hipot test system that can test Hipot, Ground Bond, Insulation Resistance, Patient Leakage, Earth Line Leakage, Enclosure Leakage and Patient Auxiliary Leakage.

Product

Regenerative Grid Simulators 9kVA-15kVA

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

Four quadrant, single- or three-phase AC power sources designed to simulate real-world grid characteristics for EV, PV inverter, and smart-grid test applications.

Product

Battery Cell Insulation Tester

Chroma 11210

-

Chroma Systems Solutions, Inc.

Chroma 11210 - Chroma Systems Solutions, Inc.

Chroma 11210 battery cell insulation tester is an instrument used for accurately measuring leakage current (LC) and insulation resistance(IR) of battery jelly-roll/dry-cell as well as other insulation materials. In addition to standard LC/IR measurement, the 11210 has a unique function that detects partial discharge (PD) or flashover that may have occurred inside the insulation material during the high voltage insulation testing process.

Product

Automated Test Systems

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

From power conversion to battery to electrical safety, our test systems will maximize your time, improve your validation process, and increase your throughput.

Product

Digital Power Meter, 30A

Chroma 66205

-

Chroma Systems Solutions, Inc.

Chroma 66205 - Chroma Systems Solutions, Inc.

66205 is the 2nd generation of the 66200 series power meter designed specifically for single channel measurement. Its state-of-the-art design is capable of providing highly accurate power measurements to meet the requirements of IEC 62301/EN50564 standards. Functionality improvements of the 66205 increase power measurement capabilities to a wider range of applications.

Product

Medical System

Sentinel III

-

Chroma Systems Solutions, Inc.

Sentinel III - Chroma Systems Solutions, Inc.

The Sentinel III System provides complete Electrical Safety Testing to IEC60601-1 and IEC 60601-2-49 (Multifunctional Patient Monitoring Equipment) in a fully automated fashion. The Sentinel III saves time by scanning patient connections for leakage current without powering down the device.

Product

Battery Safety Testers

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

The flexibility of our battery test equipment provides customers a test environment specifically for their application requirements.

Product

Sentry Hipot Tester AC/DC/IR

19070

-

Chroma Systems Solutions, Inc.

19070 - Chroma Systems Solutions, Inc.

The Sentry 19070 Hipot Tester series provides 2 models to choose from. The Sentry 19071 for AC Hipot testing; and the Sentry 19073, which combines both AC and DC Hipot with insulation resistance (IR) measurements into a single compact unit.

Product

Modular DC Electronic Load

63600

-

Chroma Systems Solutions, Inc.

63600 - Chroma Systems Solutions, Inc.

Chroma’s 63600 Modular DC Electronic Load is designed for testing multi-output AC/DC power supplies, DC/DC converters, chargers, batteries, adapters, and power electronic components. They are excellent for use in research, development, production, and incoming inspection applications. The 63600’s state-of-the-art design uses DSP technology to simulate non-linear loads using an unique CZ operation mode allowing realistic loading behavior.

Product

Regenerative Grid Simulator

61800

-

Chroma Systems Solutions, Inc.

61800 - Chroma Systems Solutions, Inc.

Power rating: Up to 300kVA, single or three phase outputOutput Voltage: 0~330V L-N / 0~570V L-L0~400V L-N / 0~692V L-L opt. without using a transformerOutput Frequency: DC, 30Hz~100HzMaximum power delivered down to 200VAC L-NFull 4 quadrant, fully regenerative up to 100% of output current ratingSpecifically designed for PV inverter, Smart Grid and EV related test applicationsProgrammable slew rate settings for voltage and frequencyProgrammable voltage and current limitsTurn on, turn off phase angle controlLIST, PULSE, STEP mode functions for testing Power Line Disturbance (PLD) simulationVoltage dips, short interruption and voltage variation simulationHarmonics, inter-harmonics waveform synthesizerComprehensive measurement capability, including current harmonicsAnalog programmable interfacesRemote interface: GPIB, RS-232, USB and EthernetParallel output for higher power applications (three phase only)

Product

50Hz-100kHz LCR Meter

Chroma 11022/11025

-

Chroma Systems Solutions, Inc.

Chroma 11022/11025 - Chroma Systems Solutions, Inc.

The Chroma 11022 and 11025 LCR Meters are passive component testers that can give you the most cost effective alternative equivalent to the high priced meters. They are designed for the demanding applications in production test, incoming inspection, component design and evaluation. Programmable test signal level settings are from10mV to 1V in a step of 10mV, and the VM/IM signal level monitor functions allow you to evaluate your devices at the level you specify. Ten test frequencies of 50Hz, 60Hz, 100Hz, 120Hz, 1kHz, 10kHz, 20kHz, 40kHz, 50kHz, and 100kHz, can be used to evaluate passive components and transformers/ LF coils.

Product

High Power DC Electronic Loads

63200A

-

Chroma Systems Solutions, Inc.

63200A - Chroma Systems Solutions, Inc.

Chroma High Power DC Electronic Loads provide wider operating voltage and current ranges up to 240kW, sine wave loading, dynamic frequency sweep to 50kHz, digitizing, MPPT, an impressive front panel that tilts, and the highest accuracy available (voltage 0.015% + 0.015% F.S. and current 0.04% + 0.04% F.S.) – all with an incredibly high power density (6kW @4U).

Product

Partial Discharge Tester

19501-K

-

Chroma Systems Solutions, Inc.

19501-K - Chroma Systems Solutions, Inc.

The Chroma 19501-K Partial Discharge Tester is an instrument equipped with AC hipot test and partial discharge detection functions, providing 0.1kV~10kV of AC output, 0.01μA~ 300μA of leakage current, and 1pC~2000pC partial discharge detect ion range for measurement. Chroma 19501-K Partial Discharge Tester is compliant to the IEC60270-1 standard in particular the partial discharge testing requirements for high voltage.

Product

Solar Array Simulator DC Power Supply

62000H-S

-

Chroma Systems Solutions, Inc.

62000H-S - Chroma Systems Solutions, Inc.

Solar Array Simulator DC Power Supplies by Chroma provide programmable simulation of Voc (open circuit voltage) up to 1800V and Isc (short circuit current) up to 30A. The 62000S-H series provides an industry leading power density in a small 3U high package. The Solar Array Simulator is highly stable and has a fast transient response design, which are both advantages to MPPT performance evaluation on PV inverter devices.