SmartTester
The SMARTTESTER® system is a comprehensive modular system of hardware and software modules for test engineering. All modules can be combined as desired. With one system you have countless possibilities to adapt the mechanical construction as well as the test procedure to your requirements at any time. Components can be easily added to the system at a later date, so that your personal SMARTTESTER® grows with your tasks.
- +49 641 986130
- contact@inotec-ap.de
- Felsweg 12 · 35435
Wettenberg,
Germany
-
Product
Clamping System Round 80-4
FM-CS-RD80-4
-
The Clamping System Round 80-4 offers a clamping range of Ø67 mm. Four interchangeable jaws for clamping inside/outside. Compatible with rotary axes RB. Delivered with two pull-down pins 8-23 for quick installation.
-
Product
Clamp 80
INO003524
-
Clamp for securing test specimens using a clamping screw.Includes down-pull pin 8-23.
-
Product
Electric Rotary Module RB63
INO013078
-
With the SMARTTESTER® actuators, you can bring movement to your test setups - linear or rotary, electrically or pneumatically. All drives connect directly to the appropriate technology modules and are conveniently controlled via the SMARTTESTER® software. Their mechanical interfaces fit the MECHANICS construction kit, allowing for easy integration into your setups. This allows you to reproducibly implement test processes with defined paths, forces, and speeds and quickly reconfigure them as needed.
-
Product
Click Connector
INO003511
-
Click connector for connecting components with M6 dovetails to the profile system Nut 8. Slot nut can be pivoted by lever, freely rotatable around the circumference. Allowable load 650 N, tightening torque max. 12 Nm.
-
Product
Angle Set 01
INO007295
-
Angle set for the flexible mounting of components or test specimens. Includes two pull pins (8-23) and two short clamping screws.
-
Product
Air Supply AME-AS-C
INO012902
-
Air supply in compact design for the SMARTTESTER® ID. Automatically supplemented in the configurator as soon as pneumatic components are selected.
-
Product
Pneumatic Linear Module LC12-20
INO006029
-
With SMARTTESTER® actuators, you bring movement to your test setups - linear or rotary, electric or pneumatic. All drives are directly connected to the appropriate technology modules and controlled conveniently via the SMARTTESTER® software. Its mechanical interfaces fit the MECHANICS kit, allowing for seamless integration into your devices. This enables you to reproduce test processes with defined paths, forces, and speeds, and quickly adapt them as needed.
-
Product
Electric Linear Axis DM-LB33-400
INO012881
-
Spindle axis 33 · 400 mm stroke · Pitch 6 · Feed force 150 N · max. 300 mm/s.With the SMARTTESTER® actuators, you bring movement to your test setups - linear or rotary, electric or pneumatic. All drives are connected directly to the appropriate technology modules and conveniently controlled via SMARTTESTER® software. Their mechanical interfaces fit the MECHANICS construction kit, allowing easy integration into your devices. This enables reproducibility of test processes with defined paths, forces, and speeds, and allows for quick modifications when necessary.
-
Product
Two Electric Actuators DME-MD48-02
DME-MD48-02
-
With the DME-MD48-02, you can operate up to two electric actuators independently. The entire drive technology operates with 48 V DC and up to 8 A – enough reserves for complex test setups while also protecting the operator, such as in the case of a damaged actuator cable. The 48 V supply comes from the main power supply, which is integrated into each test system; therefore, drive modules can be upgraded at any time. Thanks to Safe-Torque-Off (STO), drives are always safely shut down in case of an emergency.
-
Product
Eight Channel Digital Input XME-IX01-80-C
INO006004
-
The IX01-80 provides eight digital inputs for sensors such as cylinder switches or buttons, which you can integrate into the SMARTTESTER® software. Due to industrial standards and common connectors, the module is compatible with components from many manufacturers.
-
Product
Force Sensor SM-DF01-10
INO011306
-
With the SMARTTESTER® sensors, you can measure forces and torques in your testing setup. The strain gauge-based force and torque sensors are easily connected to the strain gauge input modules and set up and evaluated in the SMARTTESTER® software. They mechanically fit directly to the MECHANICS construction kit and the SMARTTESTER® actuators. This way, you can reliably capture measurement values and document your test results in a traceable manner.
-
Product
Pneumatic Linear Module LB50-100
INO006882
-
Pneumatic linear module · Size 50 · with sliding guide / fixed damping · 100 mm stroke · 1057 N / 1178 N.With SMARTTESTER® actuators, you bring movement to your test setups – linear or rotating, electric or pneumatic. All drives are directly connected to the corresponding technology modules and comfortably controlled via the SMARTTESTER® software. Their mechanical interfaces fit the MECHANICS construction kit, allowing for seamless integration into your devices. This enables reproducible implementation of test processes with defined paths, forces, and speeds, and allows for quick modifications if necessary.
-
Product
Force Sensor SM-DF01-1000
INO006880
-
With the SMARTTESTER® sensors, you can measure forces and torques in your test setup. The strain gauge-based force and torque sensors are easily connected to the strain gauge input modules and set up and evaluated in the SMARTTESTER® software. They mechanically fit directly to the MECHANICS construction kit and SMARTTESTER® actuators. This way, you reliably capture measurement values and document your test results traceably.
-
Product
Pre-Assembled Plate 400×352
INO010159
-
With our MECHANICS modular system, you have your fixtures, test specimens, and test setups firmly under control. The various, easy-to-use components work perfectly with your SMARTTESTER® testing system. Due to the identical connection technology and the same tools, the individual parts mesh seamlessly. This allows you to realize your testing scenarios in record time and adapt them super quickly.
-
Product
Pneumatic Rotary Module RD12-246
INO015204
-
Pneumatic rotary module · Size 12 · 1.25 Nm · 246° rotation angle · with stops / dampers.With the SMARTTESTER® actuators, you bring motion into your test setups - linear or rotary, electric or pneumatic. All drives are directly connected to the suitable technology modules and comfortably controlled via the SMARTTESTER® software. Their mechanical interfaces fit the MECHANICS construction kit, allowing for seamless integration into your fixtures. This enables reproducible execution of testing processes with defined paths, forces, and speeds, and allows for quick modifications as needed.
