-
-
-
Product
FTIR Spectrometers
-
Fourier Transform Infrared (FTIR) spectroscopy is a non-destructive analytical technique that can be applied to solid, liquid, and gas samples. Measuring the mid-IR spectral range, from 4,000 cm-1 to 400 cm-1, the technique detects vibrational transitions of molecules, therefore an FTIR spectrum contains vibrational information on the sample studied.
-
Product
FTIR Gas Analysers
-
Protea’s range of Fourier Transform Infrared (FTIR) Gas Analysers allows for the measurement of nearly any gas with one instrument. A FTIR gas analyser collects a full infrared spectrum continuously, allowing for hundreds of gases to be detected and measured at once. Changes are only needed to software calibration files to measure new gases.
-
Product
FTIR Spectrometer
The X-Series
-
Provide a complete solution for infrared molecular spectroscopy.
-
Product
FTIR Microscopes & Imaging Systems
-
Agilent's FTIR imaging systems and microscopes deliver superb imaging sensitivity at high spectral and spatial resolutions in applications such as polymer defect analysis, measurement of live cells in water, and the determination of chemical changes in tissues without staining. The Cary 610 is a single point FTIR microscope for accurate mapping, while the Cary 620 is a Focal Plane Array (FPA) chemical imaging system, featuring innovative optics that deliver outstanding levels of detail.
-
Product
FTIR Compact & Portable Systems
-
To meet the challenge of FTIR analysis in the field, Agilent has developed the world's smallest FTIR instruments. Our compact FTIR systems deliver the sensitivity and efficiency of a lab-based system, yet are fully portable. These portable FTIR systems feature integrated power supplies and our Flexscan and Exoscan technology for efficient scanning performance. Lightweight handheld FTIR optics and sampling modules enable advanced FTIR capabilities in field applications such as conservation and mineral identification.
-
-
Product
FTIR – Fourier Transform Infrared
-
FTIR stands for Fourier Transform Infrared spectroscopy. It is a powerful gas measurement technology for simultaneous measurements of multiple gases. The ability to detect and measure almost any gas, combined with the robustness and reliability of the technology, makes FTIR ideal for a wide variety of applications.
-
Product
FTIR Spectrometers
-
FTIR spectroscopy is used to quickly and definitively identify compounds such as compounded plastics, blends, fillers, paints, rubbers, coatings, resins, and adhesives. It can be applied across all phases of the product lifecycle including design, manufacture, and failure analysis.
-
-
Product
FTIR Motor Exhaust Gas Analyzer
MEXA-ONE-FT
-
The MEXA-ONE-FT Series simultaneously measures concentrations of multiple components, including NH3, N2O, CH4, CO and CO2, in undiluted exhaust gas using the Fourier transform infrared (FTIR) method in combination with a multivariate analysis algorithm. It incorporates HORIBA's proprietary compact interferometer which yields superior performance and high accuracy.The system complies with NH3 testing requirements of Euro VI, the EU regulation for heavy duty emissions testing.The MEXA-ONE-FT can be calibrated according to customer requirements with up to 6 component sets to cover a wide range of applications.FTIR spectroscopy allows the direct measurement of NO2 emissions and the independent quantification of individual hydrocarbon species. This makes the MEXA-ONE-FT system an ideal solution for detailed research and development tasks.Due to the measurement principle, the time-consuming daily span gas calibration is omitted.In addition, usability and flexibility are realized by “HORIBA ONE PLATFORM” which enables to extend the system with other ONE analyzers to a complete solution suitable for both certification and R&D purposes.
-
Product
Portable FTIR Spectrometer
VIR Series
-
A range of lightweight and easily transportable FTIR spectrometers. Including a hermetically sealed interferometer with anti-vibration technologies for demanding laboratory and field applications where a laboratory instrument may be unsuitable.
-
Product
FTIR Exhaust Gas Analyzer Dilute Measurement Type
FTX-ONE-CL
-
Offers a 5Hz sampling rate and simultaneously measure the concentrations of multiple components including NH3, CH4 and CO2, engine diluted exhaust gas using the Fourier Transform Infrared (FTIR) method in combination with multivariate analysis algorithm.
-
Product
FTIR Gas Analyzers
-
FTIR Spectroscopy gas analyzer instruments from MKS Instruments are capable of ppb to ppm sensitivity for multiple gas species in a variety of gas analysis applications, such as toxic gas detection, automotive emissions measurement, and monitoring stack emissions, processes, ambient air, purity, and selective catalytic reduction performance.
-
Product
Process & Lab FTIR FT-NIR Analyzers
-
Using a broad spectral region from the near-infrared to the mid-infrared, our Guided Wave ANALECT® Series of FTIR/FT-NIR analyzers measure physical and chemical properties of liquids, solids and gases. They are ideal for complex refinery applications such as fuels blending and component streams applications for polymers, petrochemicals, chemicals, pharmaceuticals in addition to general manufacturing. Customers include ADNOC, BP, CITGO, CPCL, Gazpromneft, HPCL, IOCL, Orpic, Phillips 66, Rompetrol, Statoil, PBF Energy and Tesoro.
-
Product
Portable Emissions Analysers
-
Portable Automated Monitoring Systems, P-AMS or PEMS, such as Protea’s FTIR and TDL analysers allow for a wide range of industrial pollutants to be measured periodically or as a back-up to existing CEM systems.
-
Product
Calcmet Software
-
All Gasmet FTIR analyzers are supplied with Calcmet software. The software collects, stores and visualizes the FTIR spectra of the sample gas and analyzes the concentrations of gas components. Quick and accurate results in easy-to-use package.
-
Product
AM Open Path FTIR Air Monitoring Systems
-
AM Open Path FTIR Air Monitoring Systems bring the versatility of multicomponent analysis and the immediacy of real-time results to a variety of field applications. Now you can avoid the "hit or miss" guesswork of point sampling and the inaccuracy and delays of "bag and carry" offsite analysis.
-
Product
Spectroscopy Applications
-
Anadis Instruments Benelux b.v.
Spectroscopy has become a powerful tool leading to a broad range of applications, as can be seen in the map below. From the lesser known FT-IR analysis of lipid structures in skin (of interest when applying medicines to the skin as well as in studying the effects of skin aging) to the widely used measurement of additives and the octane number (RON, MON) in fuels. Using spectroscopic techniques has many advantages. The technique is non-destructive; almost any sample can be studied in virtually any state. The techniques are applicable off-line, in-line, at-line or on-line. Identification als well as quantification is possible. Check the map with applications, it will be regularly updated and expanded.
-
Product
Chemical Testing
-
Accolade Engineering Solutions
To ensure product environmental compliance or to gain better understanding of your materials or processes, chemical testing is often required. AES has state of the art the equipment for chemical analysis. For elemental analysis XRF, SEM/EDS or ICP can be used. For molecular analysis GCMS, HPLC and FTIR may be used. FTIR may also be used for surface analysis of contamination and our microFTIR system is suitable for the smallest samples.
-
Product
1.533 Μm Frequency-Locked Laser
-
Thorlabs' LLD1530 Frequency-Locked Laser is a narrow linewidth, DFB-laser-diode-based, turnkey system with a vacuum emission wavelength of 1532.8323 nm and a high SMSR of at least 35 dB. The laser frequency is actively stabilized to a National Institute of Standards and Technology (NIST)-traceable molecular transition of acetylene and has an absolute accuracy at start-up that is better than ±25 MHz. The emission frequency immediately after start-up is then maintained with a ±25 MHz stability, providing an overall frequency accuracy of ±50 MHz. The LLD1530 is an accurate frequency reference designed to provide low-noise laser emission with excellent frequency stability, accuracy, and precision immediately at start-up. This source is ideal for use in demanding FTIR instrumentation, instrument calibration, gas sensing, and coherent telecommunications applications.
-
-
Product
EDXIR-Analysis Contaminant Finder/Material Inspector
-
EDXIR-Analysis software is specially designed to perform qualitative analysis using data acquired by an energy dispersive X-ray (EDX) fluorescence spectrometer and a Fourier transform infrared spectrophotometer (FTIR). This software is used to perform an integrated analysis of data from FTIR, which is excellent at the identification and qualification of organic compounds, and from EDX, which is excellent at the elementary analysis of metals, inorganic compounds and other content. It then pursues identification results and the degree of matching. it can also be used to perform EDX or FTIR data analysis on its own. The library used for data analysis (containing 485 data as standard) is original to Shimadzu, and was created through cooperation with water supply agencies and food manufacturers. Additional data can be registered to the library, as can image files and document files in PDF format. It is also effective for the linked storage of various types of data as electronic files.
-
Product
Spectroscopy, Elemental & Isotope Analysis
-
Research, production and analytical laboratories worldwide rely on us for rapid, efficient qualitative and quantitative analysis. Our innovative instruments and user-friendly software serve a range of industrial, educational, environmental and health markets. We offer a comprehensive portfolio for the quantification and identification of trace elemental species at ppm to sub-ppt levels in addition to isotopes. We also provide a wide range of lab-based and handheld instruments employing analytical techniques including XRF, FTIR, NIR, Raman spectroscopy, IRMS, ICP-MS and more.
-
Product
Quantitative Analysis Program
AutoQuant Pro
-
AutoQuant Pro is a powerful new automated, multi-component, quantitative analysis program for analyzing gas phase mixtures in real time. The program provides a comfortable user interface for operating a MIDAC FTIR analyzer, defining analytical methods for computing concentrations of compounds, displaying and outputting results, and automating data collection for multiple sample stream installations.
-
Product
Sample Holder/Stocker For Contaminant Measurement
EDXIR-Holder
-
Measure the Samples Kept in the Holder with EDX and FTIR The Holder Can Be Used as the Sample Stocker after the Measurement
-
Product
ATEX Gas Analyzer
atmosFIR EX
-
atmosFIR EX is an ATEX certified gas analyser system for measurement of industrial gases in a Zone 1 or Zone 2 area, providing a complete EX certified gas measurement system that meets both the sampling of non-flammable and flammable gases, utilizing Protea’s multigas atmosFIR FTIR gas analyser platform.
-
Product
Infrared, Near Infrared and Raman Spectroscopy
-
From the very compact FTIR spectrometer to the world’s highest resolution: Bruker offers the industry's largest selection for demanding routine and High End FTIR research application including the new and unique verTera cw THz functionality.Process monitoring with FTIR / FT-NIR process spectrometers.A complete line of Near Infrared Spectrometers to fit all your needs, including Process Monitoring.FTIR Microscopy and Raman Microscopy and Spectral Imaging for high sensitivity at high spatial resolution.High spectral resolution, high performance Raman and FT-Raman spectrometers for advanced routine solutions.
-
Product
Fourier Transform Infrared Spectrophotometer
IRSpirit
-
Despite their small footprint, smaller than an A3 size sheet of paper (297 x 420 mm), these models have been engineered with a wide sample compartment that accommodates existing accessories from Shimadzu and other manufacturers. This capability makes them the smallest (installation footprint) and lightest FTIR spectrophotometers in the world that can be used with optional products from other manufacturers. They also include a program, IR Pilot, with 23 application-specific workflows that can be utilized without involving any complicated parameter setup process. Customers can select from either the IRSpirit-T model, which offers sensitivity equivalent to standard Shimadzu models, or the reasonably priced IRSpirit-L model.
