ATE Integration
develop and build all or part of automatic test systems. Integrators
See Also: ATE Integrators, Test Development
-
Product
Leak & Seal Integrity Tester
-
Saicheng Leak Tester is professionally designed for the leakage tests of packages, bottles & pouches for food, drugs, medical instruments, household chemical products, cars, electronic components, stationeries and other industrial products. The instrument also can be used to test seal performance of specimens after falling and compression tests.
-
Product
Integrating Spheres
IP-Series
-
Photometric Integrating spheres are used for evaluation of luminous flux of light sources & luminaires with a single measurement & for comparative analysis. The sphere is an essential tool for photometric research laboratories & lamp/luminaire manufacturers.
-
Product
Integrated MIC/MMIC Assemblies (IMAs)
-
PMI offers the highest quality multi-function modules and integrated microwave assemblies for commercial and military applications in the frequency range of a few MHz to 50 GHz. If you do not see exactly what you need, please e-mail your requirement to sales@pmi-rf.com so we can propose an instant solution.
-
Product
Integrated Event Recorder
-
Wabtec’s integrated family of event recorders feature an FRA Crash Hardened Memory with capacities of 8 to 128GB permit storage of Event Data from a variety of locomotive sources, storage of PTC mandated data channels, and storage of up to four HiDef video cameras. In addition to crash hardened memory, units can provide removable solid state disk storage of video from panel.
-
Product
Full Custom Integration
-
SKY Computers is a leading provider of fully configured subsystems for demanding signal and image processing. Based on open standards, SKY's SMART systems deliver high-performance and high application availability with a secure, "intelligent," and adaptable design that includes both hardware and software resources.
-
Product
Integrated I-V Test Systems
-
The OAI Integrated I-V Test System is perfect for R&D as well as production, the OAI Integrated I-V Test System delivers extremely accurate solar cell performance measurement. OAI’s advanced fully Integrated I-V Test System is designed to overcome the limitations of flash testing by providing a highly optimized pulse width and voltage sweep rate to match any type of solar cell’s high capacitance and slow dielectric response speed. As a result, the system produces extremely accurate measurements of solar cell I-V parameters and efficiency while leading to the most accurate test results.
-
Product
Voltage Integrated Sources
VIS
-
The VIS voltage integrated source was designed to be used as a stable alternating voltage source for electricity meter test equipment, and in laboratories. The output voltage is isolated and independent of mains voltage. VIS is available in a variety of configurations depending on the values of output power and output voltage.
-
Product
High-Voltage Test Hood with Integrated Hipot
LX-HVE900IS
-
Large test room with a hood made of sturdy, highly insulating and transparent plastic, which guarantees a clear view of the test item and the signal lamp during the test. The system is operated on the test device. Alternatively, test sequences stored on an integrated computer can be started automatically by closing the hood. The test sequence can be fully followed on the monitor.
-
Product
National Instruments System Integrator
-
Knowledge of all National Instruments platforms and its wide experience in using and integrating NI hardware (CompactRIO, sbRIO, PXI, CAN, DAQ, etc.) and software (LabWindows/CVI, LabView e TestStand), IPSES offers to its clients customized solutions and services, providing both technological and economic benefits.
-
Product
Code Integrity
JScrambler
-
If you develop a security sensitive Web Application we believe that you don''t want to give any bonuses to possible attackers. JScrambler enables you to conceal as much as possible, the logic of your application, such as what information is gathered from the user, how it is processed on the client-side, how it is sent to the servers-side. Since our obfuscation introduces a certain level of randomness, it allows you to explore code morphing techniques, which can be vital in precluding attack automation.
-
Product
Digital Current Integrator
-
The ORTEC Model 439 Digital Current Integrator was designed to accurately measure DC currents or the average value of pulse currents such as produced by accelerator beams. It digitizes the input current by producing an output pulse for specific values of input charge. A front-panel switch permit the selection of three different amounts of charge (10–10, 10–8 or 10–6 coulomb) required to produce an output pulse. The instrument has a digitizing rate from 0 to 10 kHz to provide wide dynamic range on each setting and high-resolution readout without meter interpolation.
-
Product
Integration testing
-
Integration testing primarily focuses on verifying data communication among different modules of the software project. Integration tests determine the effectiveness and performance of different software modules when they are connected to each other.
-
Product
Systems Integration & Test
-
Watring Technologies, Inc. is an experienced, diversified high technology company proficient in total system integration services including test & evaluation, custom tooling design, and automated hardware validation and verification. We give customers access to a sole- source, multi-disciplinary staff of specialists offering turn-key solutions.
-
Product
Integrated Ultrasonic Level Gauge
HR9100T
-
HighReach Measuring & Controlling System Co.,Ltd
The circuit design selects high-quality power module components from the power supply part to select high-stability and reliable devices, which can completely replace the same type of imported instruments. The patented sonic intelligent technology software can perform intelligent echo analysis the debugging and the any OTHER Special the without Steps. This Technology has Dynamic Thinking at The Functions of the Analysis and Dynamic. Sound Wave at The Patented Technology of Our Company Makes at The Accuracy of at The Instrument Greatly Improved, at The Precision Liquid Level Reaches 0.25%, and IT CAN Resist various kinds of interference waves. This instrument is a kind of non-contact instrument, which does not directly contact with liquid., the instrument has a variety of installation methods. The user can use this manual to calibrate the instrument. All input and output lines Of the instrument have lightning protection and short circuit protection.
-
Product
Absolute Luminous Flux Integrators
-
Photometric Solutions International Pty Ltd
The Absolute Luminous Flux Integrator (ALFI) is a special device for absolute measurement of the luminous flux output of lamps. It can also to measure the luminous intensity distribution of small lamps and luminaires.
-
Product
Integrated Two-Stage Current Sensors
-
If ultra-low noise performance is required, our integrated two stage devices are the number one choice. With input inductances from 24 nH to 1.8 µH and a flux-noise level as low as 0.8 µPhi0/sqrt(Hz) an energy resolution of about 45 h is attained. The devices consist of a 16 SQUID series array as amplifier stage and a single front-end SQUID.
-
Product
IJTAG IP Integration Environment
Tessent IJTAG
-
To manage the complex requirements of testing a heterogeneous set of embedded IP, the industry developed IEEE P1687 (IJTAG). It standardizes a language for describing the IP interface and how IPs are connected to each other. It also introduces a language that defines how patterns that operate or test the IP are to be described. IEEE P1687 draws a clear line between what must be covered by the standard and what is better left to the ingenuity of the tool developers.
-
Product
Spectrophotometer & Integrating Sphere Test System
LPCE-1
-
This Test System is suitable for photometric and colorimetric measurement of luminaries such as Energy-saving lamps, Fluorescent lamps, HID lamps (high voltage sodium lamps and high voltage mercury lamps), CCFL and LED. The measured data meets the requirements of CIE and IES LM-79 for the measurement of photometry and colorimetry.
-
Product
Integration Services
-
Factory Installation ServicesVME Systems TrainingConsulting for Advanced Algorithm DevelopmentCustom Systems Integration ServicesConfiguration Management Services
-
Product
Integrating Spheres For Reflection, Transmission, Absorption
-
Universal integrating spheres and accessories optimized for the measurement of reflection, transmission, absorption and photoluminescence
-
Product
IEC 61131 Integrated Development Environment
AMAX Studio
-
Advantech IEC 61131-3 PC-based PLC integrated engineering environment for EtherCAT network eco-systemsProvides access to all five standard programming languages (FBD, LD, ST, SFC) plus variants, ensuring flexibility and adherence to the international standardIncludes integrated compilers optimized for a wide range of CPU hardware platforms to maximize the execution efficiency and performance of the controller application codeIntuitive I/O interface for AMAX-5000 Slice I/O and AMAX-4800 Block I/O, easy to proceed configuration, testing and monitoringAdd-on EtherCAT networking topology and diagnostics toolkitComplimentary data log library to save structured and time-stamped informationAgent & Data Connect (ADC) service provides flexibility and efficiency in data exchange between edge controller and supervisory gatewayValue-added provision of modular, application-oriented building blocks to accelerate project development
-
Product
Hydrogen Solutions for OEM Integration
-
H2scan’s breakthrough hydrogen sensing technology is available for integration into your product as an OEM assembly. Various options are available ranging from just a hydrogen sensor sub-assembly to a full-up product assembly.
-
Product
Microelectronics - Integrated Solutions
-
Teledyne e2v HiRel provides microelectronics packaging and products with a full range of packaging solutions from COTS to MIL-PRF-38534 compliant (Class H & K) qualifications. HiRel provides a one stop solution for your microelectronic assembly, evaluation, test and screening requirements. Our MCM packaging technology enable our customers to meet size, weight, power and cost (SWaPC) requirements without a sacrifice in performance. Our numerous certifications including AS9100, ISO 9001, and MIL-PRF-38534 Class H accreditation, all of which are integral factors in our company-wide initiative to deliver high-reliability microelectronic devices that meet our customers' stringent requirements. We are a DOD Trusted Source for Microelectronics Packaging, Assembly, and Test.
-
Product
Coating Thickness Gauge - Integral
Elcometer 456
-
Whether you are measuring on smooth, rough, thin or curved surfaces, the Elcometer 456 Dry Film Thickness Gauge produces accurate, temperature stable measurements thanks to its ±1% thickness measurement capability and increased reading resolution.
-
Product
Integrated Vision System
In-Sight 7000
-
In-Sight 7000 FeaturesYou will find so many machine vision applications for the award-winning In-Sight 7000 series of vision systems. These completely integrated smart cameras feature autofocus, fast image capture, integrated lighting and lens with powerful vision tools for inspection, color, OCR applications and more. They also have the capability to power and control a range of external lightingall in a compact, industrial IP67 package.
-
Product
Integrated Performance Monitoring Software
SQlive
-
SQlive™ is compact, ready-to-install software for monitoring the performance of streaming video, IPTV and Voice over IP. Compact and highly resource efficient, SQlive can be embedded into mobile handsets, media players, set-top boxes, home gateways and other CPE and end system devices.
-
Product
DAQStream - Integrated Rack Systems
-
DAQStream rack systems deliver unmatched high-density, scalable, processing intensive solutions for the aerospace and defense industry. Supported applications include: scene generation, digital simulation, and hardware in the loop testing.
-
Product
Integrating Sphere Solutions
-
An integrating sphere is a light collector which takes advantage of physical geometry to homogenize any radiation being emitted inside by relying on a high-reflectance coating material. Depending on the wavelength range the end user using a sphere with, different coatings have different advantages based on the application.
-
Product
Transmission & Integrating Sphere FT-NIR Spectrometer
QuasIR™ 4000
-
The QuasIR™ 4000 was designed from the ground up to offer the industry a new kind of NIR analysis solution – a solution that brings together the portability required to move NIR analysis closer to point-of-need, combined with unmatched spectroscopic performance for the fastest and most accurate results.





























