Product

Ethernet To Fiber Optic Converters (Point To Point)

-

CommFront Communications

CommFront Communications

Our rugged, industrial-grade, point-to-point Fast and Gigabit Ethernet to fiber optic converters work in pairs to extend 10/100/1000M Ethernet signals over long distance. These Fast and Gigabit Ethernet to fiber optic converters have been designed for harsh industrial environments and withstand a wide temperature of -40°F to 185°F (-40°C to 85°C), and they come with the options of multi-mode and single-mode, and ST, SC, FC, and SFP connectors.

Product

Fiber Endface Inspector

CA-EASYGET

-

UC Instruments, Corp.

CA-EASYGET - UC Instruments, Corp.

The CA-EASYGET fiber endface inspector is the masterpiece of our engineer which withexcellent performance and convenient operability, trust it is the best choice for fiber endface inspection. Taking use of 220k pixel of TFT sharp and finely LCD, which magnify about 200 times of object, it makes you easier to judge the status of fiber endface. And its compact size made it ideal tool of connector endface inspection before fiber network installation, varies of adapters meet different requirements on inspect male fiber connectors&female fiber connectors, such as FC SC ST E2000 LC MU and TOSA ROSA fiber endface.

Product

Optical Fiber 25×1 Switch

OFSW - 25 × 1

-

Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW - 25 × 1 - Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW- 25×1 is a 25×1 prism optical switch. It can support 25 optical fibers input and 1 fiber output, channel switch. Wide operating wavelength range, low insertion loss and speedy switching rate, can use network trends configuration, network monitor and lab application.

Product

Ultrafast Fiber Optic Photodetectors

DXM Series

-

Thorlabs, Inc.

DXM Series - Thorlabs, Inc.

The DXM series of Ultrafast Detectors are fiber-coupled photodetectors with wide wavelength ranges, as shown in the plot to the right, that are designed to be used for a variety applications. Each provides a high-fidelity electrical output pulse in response to an optical input pulse, and their clean impulse responses have full width half maxima (FWHM) down to 15 ps.

Product

Managed Ethernet Switch with L2/L3 Layer Support and Fiber Optic Option

ES2

-

North Atlantic Industries

ES2 - North Atlantic Industries

Ethernet Switch module, ES2 provides up to 16 10/100/1000 Base-T 1 Gb ethernet ports. Additionally, there is one 10/100/1000 Base-T maintenance port interface, one RS-232 maintenance/console port interface, and a Fiber-Optic channel with four 10 Gb ports. It also provides numerous L2 and L3 networking, quality of service (QoS) and security features available as described below.

Product

MIL-STD-1553 Fiber Optic Bus Extender

FO-1553

-

Avionics Interface Technologies

FO-1553 - Avionics Interface Technologies

Extends MIL-STD-1553 bus access to over 1 mile for remote access - Dual redundant, single and dual stream options available - Both Transformer and Direct coupling modes supported - Uses fiber optic 1.0625 Gbps data rates for low latency over long distances - Optical signaling is not affected by electrical noise and interference - Simple and easy to use solution, no software setup or configuration required - Ideal for applications where test equipment is separated from UUT

Product

Fiber Optic Communications

-

Campbell Scientific, Inc.

Campbell Scientific, Inc.

Fiber optic converters are installed between the end of fiber optic cables and data loggers to provide a lightning-proof connection.

Product

Datacenter 12 MPO Fiber Optic Testers & Switches

-

Optical Wavelength Laboratories

Optical Wavelength Laboratories

MULTI-PAIR FIBER LINKS are becoming more common than single pair fiber links for high speed communications, especially in data center environments. OWL DataCenter 12 Series test kits automatically test 12-fiber MPO cables and links without requiring cassettes or fanout cables. Higher density connections (i.e. 24, 36, 48, 60 or 72) can also be tested with MPO break-out cables.

Product

Femtosecond Fiber Lasers

-

Menlo Systems Gmbh

Menlo Systems Gmbh

Best in class femtosecond fiber lasers: highest output power, lowest phase noise, highest reliability. Choose the perfect model for your application from our Erbium and Ytterbium fiber lasers with center emission wavelengths from the visible to the NIR, and extending to the Mid-IR in selected models.

Product

Omega Fiber Optic Connector

-

Teledyne Marine Impulse-PDM

Teledyne Marine Impulse-PDM

Teledyne lmpulse-PDM's Omega Series offers any combination of multi-mode or single-mode optical ways and 16 AWG electrical ways from a single way through to seven ways. Electrical pins are part of the CCP and the mating sockets are part of the FCR, CCR or BCR. Connectors populated with both electrical and optical ways will be populated in a standard Teledyne lmpulse-PDM format to facilitate interchangeability between batches. This information can be provided at the time of quotation.

Product

Antenna Coupler, 300 MHz - 6 GHz

dbCOUPLER

-

DVTest Inc.

dbCOUPLER - DVTest Inc.

The dbCOUPLER is ideal for many different applications including security, GNSS, Bluetooth, WiMAX, Wi-Fi, 5G, LTE, and RFID (vUHF SHF).

Product

Miniature Fiber Optic Pressure Transducers

-

FISO Technologies Inc.

FISO Technologies Inc.

*The diameter of the working length section can be as small as 0.5 French *The sensor tip size can be as small as 0.8 French The flexibility of the glass fiber offers excellent deliverability without being prone to kinking like electrical wires *The front looking configuration of the sensor tip prevent side-facing/wall bouncing artifacts in the measurement*The lack of metallic components provide full immunity to interference from RF, MW and MRI systems

Product

C & L-Band Separate Raman Fiber Amplifier

RFA7000

-

Hangzhou Huatai Optic Tech. Co., Ltd.

RFA7000 - Hangzhou Huatai Optic Tech. Co., Ltd.

1. Erbium-doped Fiber Amplifier, due to the multiple cascades and the accumulation of noise caused by spontaneous emission, will reduce the system CNR greatly and thus it will limit the transmission capacity and distance of the system. Raman Fiber Amplifier (RFA) is a newly designed fiber amplifier based on Stimulated Raman Scattering (SRS) effect. It is considered as the core technology of new generation DWDM fiber over-long communication. Compared with Erbium-Doped Fiber Amplifier, Raman amplifier has the advantage of low Noise Figure (NF), wider gain bandwidth, flexible gain spectral region and stable temperature. It is the only device that can operate in 1300~1600 nm.

Product

Fiber Inspection Probe

FIP-920

-

SYOPTEK INTERNATIONAL LIMITED

FIP-920 - SYOPTEK INTERNATIONAL LIMITED

FIP-920 Fiber Optic Inspection Probe combines a 3.5” high definition TFT LCD display, provides a detailed image of fiber end-face, zoom in/out feature make it easy to identify the smallest particles, scratches. With the attached SD card memory, you can capture/record the live end-face image, the image file can be reviewed/transferred via SD card reader or USB cable. Up to 8hrs battery working make it possible to inspect the fiber end-face at any time and any place.

Product

Fiber Optic Inspection & Cleaning

-

AFL

AFL

One of the most basic and important procedures for the maintenance of fiber optic systems is to clean the fiber optic equipment.

Product

Fiber Extender Kit

L-1SDI-FE-3G-TX/RX

-

QuestTel

L-1SDI-FE-3G-TX/RX - QuestTel

The L-1SDI-FE-3G-TX/RX is a SD/HD/3G-SDI over fiber transmitter and receiver extender kit. This unit provides optical transmission of one SD/HD/3G-SDI signal with embedded audio signal and has reversed RS485 data channel for camera control. L-1SDI-FE-3G-TX/RX kit can be used in HD video conference, as well as HD video monitoring, intelligent transportation system and public security system.

Product

Fiber Optic Network Simulators

SIM-2FON-25

-

Virtual Console, LLC

SIM-2FON-25 - Virtual Console, LLC

Vconsole fiber optic network simulator is custom built portable unit intended to simulate installed fiber optic facilities. Vconsole will design and build custom unit exactly to customers specification. The enclosure is capable of housing an individual spool with up to 100km of fiber. We will build each unit to client unique needs with custom fiber types, lengths, and connectors. A full range of connectors are available including SC, ST, FC, and LC types. This product is ideal for latency testing, product development and training and educational needs.

Product

3 DB 90 Degree Hybrid Couplers

-

KRYTAR, Inc.

KRYTAR, Inc.

KRYTAR's 90 Degree Hybrid Couplers perform many functions, including splitting and combining signals in amplifiers, switching circuits, and antenna beam-forming networks used in a wide range of commercial and military applications. 90 degree hybrids are used in circuits requiring a balanced division of power into two transmission lines with 90 degree separation of phase.

Product

Polarization Maintaining Fiber Components

-

OZ Optics

OZ Optics

OZ Optics offers a broad range of polarization maintaining components, patchcords, and connectors designed to resolve polarization problems, which are becoming increasingly important in today's higher speed and more complex mesh optical networks. By maintaining the polarization of the signal at its source, our polarization maintaining components minimize polarization mode dispersion and eliminate the effect of polarization dependent loss thereby increasing the quality of the signal that is transmitted throughout the network.