EMC Software
common UI to control, monitor and analyze EMC measurement.
See Also: EMC, EMC Analyzers, EMC Probes, EMC Testing Services, EMC Test
-
Product
Software For Protective Relay Testing
TDMS Pro
-
TDMS Pro is the NEW software platform designed to efficiently run tests and manage test data of almost any kind of electromechanical and digital relay from any manufacturer.From the simplest to the most complex type, TDMS Pro, with a completely new graphic interface and advanced test functions, can be used to test all types of multifunction protection relays installed in power transmission and distribution networks, in power plants and industries. The universal test set compatible with TDMS Pro are: DRTS 66, DRTS 64, DRTS 34 and DRTS 33.
-
Product
3D Software
Geomagic Control X
-
Combined with the powerful and highly precise Artec 3D scanners, Geomagic Control X is a fantastic solution for anyone looking for speed, accuracy and a large variety of tools to choose from. Easily get the data required for extensive quality control in no time at all with Artec’s advanced 3D scanning solutions. Acquire precise measurements and carry out inspection and data analysis on the spot, using Geomagic Control X and an Artec 3D handheld scanner. Compare 3D scans to the reference CAD model to minimise assembly flaws and increase productivity.
-
Product
Software & Hardware Interface
XJAPI
-
The XJAPI is a simple-to-use DLL Application Program Interface (API), designed to give you low-level access to the JTAG chain via either the XJLink or the PXI hardware, allowing easy integration with a wide range of other systems such as development/evaluation boards, test systems
-
Product
Software
Part Tracking
-
Part Tracking technology is a software application included in Akrometrix Surface Measurement that increases system throughput while reducing user to user and system to system measurement variation. Part Tracking uses edge recognition technology to locate a part in space and automatically crop/rotate the sample for processing of the found surface area.
-
Product
Mass Spectrometry Software
-
The MassHunter software suite supports efficient data acquisition, qualitative data analysis, mass spectral library management, quantitative data analysis, easy access, and reporting for Agilent GC/MS and LC/MS systems.Data acquisition software for GC/MS and LC/MS allows straightforward setup and operation of the entire system, while powerful data analysis software and application-specific software tools streamline the analysis workflow for any sample task. Powerful library management software with extensive curated libraries and databases for Q-TOF instruments facilitates unknowns identification. Finally, simplified software interfaces for mass spectrometry provide access to the power of mass spectrometry to anyone.
-
Product
LC Software
LabSolutions DB
-
LabSolutions DB integrates a data management function with LabSolutions LC/GC and is compliant with the ER/ES Regulations. It is optimally configured for customers using a PC.
-
Product
Vibration Analysis Software
VibroDesigner
-
VibroDesigner software is used for data acquisition, storing and analyzing. Using this software with portable STD-500/510/3300 or stationary CTD3168/2160/2060 units helps to schedule machinery maintenance at a convenient time.
-
Product
Simulation Environments Software
Modelica
-
Modelica Libraries with a large set of models are available (overview, details and download). Especially, the open source Modelica Standard Library contains about 1280 model components and 910 functions from many domains.
-
Product
Robot Software
-
Our fully integrated software enhances productivity by combining control, safety, motion and more into a single software architecture and development environment.
-
Product
Software Test Automation Solution
ZAPTEST
-
ZAPTEST is a software test automation solution for testing Mobile; Web; Desktop applications Cross-Platform. ZAPTEST allows testing of any GUI based software on any modern OS, mobile or conventional including iOS; Android; WinMo; Blackberry; Windows; Mac; and Linux, and supports testing of Agile and CI development.
-
Product
Thermal Software
ThetaCalc
-
Thermal Engineering Associates, Inc.
A tool designed to provide a quick estimate of the temperature and thermal resistance from a heat source to a reference heat sink. It also shows the temperature and thermal resistance value of each layer in the heat flow path. The program can accomodate up to ten layers of different materials of varying dimensions between the heat source and sink. The heat spreading angle can be set independently for each layer to a value between 0 and 45 degrees; the tool will automatically determine if heat flow reaches the layer edge and then convert to columnar flow.
-
Product
Temperature Calibration Software v5.1
MET/TEMP II
-
MET/TEMP II software allows you to easily automate the calibration of a wide range of temperature sensors. It provides a comprehensive temperature calibration solution that allows you to test large quantities of sensors, calculate characterization coefficients, and print calibration reports. You can standardize comparison or fixed point calibrations and use multiple temperature sources or references in one test.
-
Product
Software Engineering Services
-
Reston Software provides state-of-the-art, U.S.-based software development services. We can fulfill your immediate and long-term software development needs by creating new applications, supporting and enhancing existing applications, and modernizing legacy applications.We focus primarily on Microsoft technologies: .NET, WPF/XAML, Visual C++, COM/ATL, ASP.NET, Microsoft Office plug-ins.We also specialize in upgrading legacy programs to modern environments. We are experienced in upgrading Visual Basic programs (from version 2.0 and higher) to the latest version of VB.NET, and in upgrading Windows NT, 2000, and XP applications to Windows Vista, 7, and 8.
-
Product
Seismic interpretation Software
Intersism
-
Intersism it's a software designed to make the entire processing of seismic data coming from a refraction seismic method acquisition. The software extract data directly from the file SEG2 format, SEGY or SU - and give you the possibility to put directly the first arrival picking time.
-
Product
Software & Tools
-
Fixed retail scanners are supported by a range of software and tools that ensure smooth operation, integration with POS systems, and centralized management. At the core, embedded firmware handles barcode reading, decoding, and communication with the host system. Configuration utilities allow users to adjust scanner settings, such as enabled symbologies, audio/visual feedback, and interface types.
-
Product
Software
MOS Doping Profile Analysis
-
Materials Development Corporation
MDC uses the comprehensive Ziegler algorithm toconvert pulsed MOS C-V data to a doping profile. The doping profile is accurate from the oxide semiconductor interface to the maximum depletion depth and is therefore useful for low dose ion implant monitoring. Peak doping, range, and total active dose are computed. The technique is sensitive enough to resolve changes in the substrate doping profile due to redistribution during oxidation.
-
Product
Remote Condition Monitoring Software
-
The specially designed EDM-RCM software simultaneously connects multiple such Spider systems in addition to providing updated results of essential data for all Spider front-ends located throughout the world. The software provides a live view of data from any Spider system as needed and downloads recordings from any or all Spider front-ends for further analysis and inferences.
-
Product
Software
-
From embedded low-level essentials like built-in-test and operating system board support packages, to advanced middleware for board and system health monitoring, image processing and autonomy support, Abaco's ever-growing software suite gives developers what they need to implement their application solutions.
-
Product
Technical Software Engineering
-
Technische Software Entwicklung Plazotta
TSEP is a system house that has specialized since 1988 in the development of system-related software in the fields of communications technology, telecommunications, instrumentation and automotive. Since 2005 TSEP also develops hardware solutions for its customers. Here TSEP offers not only the hardware solution (schematic, layout, production, etc.), but also the software technical integration of hardware into the operating system and the application. These solutions are characterized by the fact that both the hardware and the software are perfectly matched.
-
Product
3D Measurement Software
PowerInspect®
-
3D measurement software for a range of hardware.PowerInspect software makes inspecting complex free-form surfaces simple, across all your inspection hardware. Use the right tools for the job, with one interface on all devices.
-
Product
Vision Software
-
These “all-in-one” software products have been deployed in thousands of installations around the globe, providing advanced tools, design flexibility and system versatility to suit diverse application needs across all industries. Built to run on our smart camera and multi-camera vision systems, our easy-to-use iNspect and Sherlock design platforms save you time and reduce vision development costs without compromising system performance or reliability.
-
-
Product
Server Software
T-Ray® 5000 Series
-
The T-Ray® Server Software is the most versatile terahertz waveform processing software available today. Built as a modular software platform, T-Ray® Server collects, analyzes, and serves terahertz waveforms and measurement data for a broad range of customer applications.
-
Product
Microscopy Image Analysis Software
analySIS FIVE
-
The image analysis software "analySIS FIVE" is designed for users of industrial microscopes compatible with digital cameras for microscopes. Users can select from 5 types depending on their required functions, such as "measurement," "database," "report creation," and "particle analysis."
-
Product
PDS Imagescan Software
-
Teledyne PDS software is one of the most versatile software packages available in the dredge / construction market. Its scalability allows the user great flexibility in which way the software is used.PDS is used for example on wirecrane and excavator operations to monitor the activities, it can be expanded with other tools to support special applications. One example is the add-on of a laser scanning system to enhance the bucket position on a wirecrane or adding a TDY BlueView BV5000 unit on a crane to measure in real-time the area you dredge or place objects into. This is the so-called PDS MotionScan option.
-
Product
Alert Receiver Software
SafAlert
-
SafAlert is an autonomous alert decoder triggered by any programmable single, dual, or sequential tone signal, such as EAS, NOAA, or 2-tone fire alarm page. User-programmable visual, audible and email alerting
-
Product
RCS Software
CEMExpert
-
CEMExpert is a software dedicated to the prediction of radar cross-section of aerial and naval targets. The software uses both the high-frequency asymptotic method (PO-PTD) as well as the full-wave equation solver (FVTD). A quick calculation is made possible by automated meshing, scripts for azimuthal scan and parallel processing. The software has been used for improving stealth performance of UAVs, for shape optimization of naval ships and RCS characterization of target missiles.
-
Product
CAD Software
Verisurf CAD
-
Verisurf CAD is the foundation of all Verisurf suites and makes our software unique in the metrology industry. Verisurf software is different because it not only imports every major CAD file format; it is a complete 3D modeling application.Verisurf is the only metrology software that includes wireframe modeling, NURBS surfacing, Parasolid solid modeling, 2D drafting, and Model-Based Definition (MBD) that automates manufacturing.
-
Product
EMC Test System
-
An electric product might cause the malfunction to other electric appliances by discharging the emission noise from it, or is oppositely caused the malfuction by the emission noise from other electric appliances. The former is checked by the EMI test and the latter is checked by the EMS test. The international standard like the CISPR standard is provided so that such an accident should not happen, and the manufacturer must declare by themselves beforehand that their product meets the standard. The generic name of the EMI test (Electro-Magnetic Interference) of the emission measurement and the EMS test (Electro-Magnetic Susceptibility) of the immunity
-
Product
Network Analyzer Software
-
Network analyzer software tools enable you to investigate, characterize, and troubleshoot your designs in a variety of measurement applications. Software applications are available for PNA-X, PNA-L, PNA and ENA series network analyzers.
