Machine Model
-
Product
Model LG: Drywall Moisture Meter
MRC006505
-
Provides average moisture content down to a penetration of 1in. Uses radio frequency capacitance to measure the moisture content of gypsum wallboard. 0% - 25% moisture range.
-
Product
Model A8-AF: Radome Moisture Meter
MRC005574
-
Indicates the moisture pockets in aircraft radomes. Two main components include the electrode sensor and the metering unit. Critical to today's sophisticated radar transmissions as poorly monitored moisture levels can degrade radar operation.
-
Product
Impact Testing Machines
-
Infinity Machine International Inc.
Impact Testing Machines by Infinity Machine International Inc. - for applications such as laminated glass impact testing, plastic drop ball impact testing machine, tempered glass pendulum impact testing machine, testing machine for safety glass, slope inclined impact test apparatus for package carton, and more.
-
Product
Automatic tensile testing machine
-
This device evaluates the tensile characteristics of plastics and plastic composite materials. The sample is automatically measured for its size and tested when set in the feed section. Very high-precision elasticity measurement is possible.
-
Product
Simulink models run on ADwin
ADsim
-
With ADsim, you easily run Simulink models on ADwin hardware. With a few clicks only, you insert inputs and outputs for the ADwin system as blocks into the model and start C code generation. After compilation, the model runs on the ADwin system in real-time with absolute timing precision and predictability reaching sample rates up to 100 kHz.
-
Product
Fully Automatic Plastic Tensile/Bending Testing Machine
-
This is a fully automatic tensile and bending tester for plastics. It is capable of continuous operation from measurement of specimen dimensions, supply, and data processing.
-
Product
Universal / Tensile Testing Machine Consumables
-
Universal / Tensile Testing Machine Consumables
-
Product
In Situ Testing Machine
IST Series
-
Jinan Testing Equipment IE Corporation
*Load meets or exceeds the following standards: ASTM E4, ISO7500-1, EN 10002-2, BS1610, DIN 51221. *Strain measurement meets or exceeds the following standards: ASTM E83, ISO 9513, BS 3846, EN 10002-4. *Safety: This machine shall conform to all relevant European CE Health and Safety Directives EN 50081-1, 580081-1, 73/23/EEC, EN 61010-1.
-
Product
Solder Paste Inspection Machine
3D SPI
-
The 6500 series is the measurement equipment provided by Jiezhi Technology for the small pads of solder paste printed on the PCB board. It will cause defects such as sharpness, offset, more tin, and less tin printing during solder paste printing. Causes defects in the later stage of production, this equipment can find problems in advance
-
Product
Analytical Gear Inspection Machine
KNM 2X / 5X series
-
Analytical gear inspection machine for workpieces up to Ø 650 mm. Measuring machines for spur and helical gears, rotors, bevel gears, gear tools, shafts etc. Ultimate highly precise measurement of smaller size gears in the lab or on the shop floor - no foundation required.
-
Product
Compression Testing Machine
-
Jinan Scientific Test Technology Co. LTD.
Compression Testing Machine
-
Product
Common Electromechanical Universal Testing Machine
WDW-D series
-
Jinan Testing Equipment IE Corporation
WDW series computer control electromechanical universal testing machines (UTM) is designed according to ASTM, ISO, DIN, EN standards etc.. It is computer-controlled and precision. Our electromechanical universal testing machine (UTM) is widely suitable for metallic and nonmetallic materials for tension, compression, bending, shearing and low cycle test. The electromechanical universal testing machine features as high precision, high stability and high reliability. Graph, test result display, data processing and printing can be done easily by its PC system and printer. Completed with modulus for metal, spring, textile, rubber, plastic and other material test, our electromechanical universal testing system is widely used in many fields such as industry factories, research and development, test institutes and training centers etc. WDW common series electromechanical universal testing machines (UTM) adopt rigid load frames, accurate load weighting system, advanced PCIE measuring & control system and intuitive modular application software. Configured with wide range of accessories for applications, the materials universal testing machines (UTM) can provide the best testing solutions for your individual application needs. With 20 years’ experience of materials testing industry and based on abundant application knowledge, we are completely capable of configuring the best solutions and more accurately testing systems for the manufacturers involved in load frame, core measuring and control elements, software package, grip/fixture that based on their specified test application and other requirements.
-
Product
Unregulated Power Supply Models
Custom Power SupplySystem Builder
-
We have millions of power supply models, but if you can't find what you need in our standard stand alone models, we can fill your needs with one of our Power Systems. (We can also easily modify power supplies to meet customer requirements.)
-
-
Product
Office Machine Testing
-
Specialists in the testing of all types of paper, office supplies, and multifunctional office equipment manufactured worldwide, American Testing Laboratory helps clients to determine whether or not their products will perform to maximum capacity. American Testing Laboratory is staffed with degreed engineers and technicians whose backgrounds include over 40 years of testing for leading manufacturers and remanufacturers worldwide.
-
Product
Spring Fatigue Testing Machine
TPJ Series
-
Jinan Testing Equipment IE Corporation
Model TPJ Series Mechanical Computer Control Spring Fatigue Testing Machine is mainly used for the fatigue properties of all kinds of coil springs, disc springs, shock absorbers, and seal springs etc. The Spring Fatigue Testing Machine consists of motor, reducer on the connecting cams to drive the connecting rod and make reciprocating motion achieve the compression fatigue movement. The Spring Fatigue Testing Machine is efficient without any pollution to the environment. Equipped with different accessories, the Spring Fatigue Testing Machine can test springs of different sizes. Adopting the single-chip machine control, the Spring Fatigue Testing Machine realizes auto stop function when it reaches the preset test times. The Spring Fatigue Testing System is widely used in quality controls for spring, shock absorber production, and relevant applications.
-
Product
Dual Channel Arbitrary Function Generators 80 & 160MHz models
TGF3000 Series
-
The TGF3000 series of function/arbitrary generators offers signal generation capability up to 160MHz on two identical full performance channels that can operate independently or in coupled or tracking modes. Precise channel to channel phase control with a resolution of 0.001° is provided.
-
Product
Machine Vision Software
NeuroCheck
-
NeuroCheck is a general purpose image processing software for industrial quality control. The software has been designed to meet the requirements that an up-to-date quality management system makes on the visual inspection of every single item. Using NeuroCheck, you can check completeness of assembly groups, surface quality and measurements of work pieces, correctness of inscriptions and precise positioning.
-
Product
Concrete Comprission Testing Machine
CONCRETO 2000X/3000X
-
CONCRETO Series This compression testing machine can safely and efficiently perform tests at a high capacity without causing explosive fracture (failure of the specimen) on ultra-high-strength concrete, which is used as a structural material in high-rise buildings, etc. This one machine can be used for materials ranging from ultra-highstrength concrete to specimens that have been recently cast, mortar, etc.
-
Product
Potable Coordinate Measuring Machines
Romer
-
A first in the world of portable measuring arms: The ROMER Absolute Arm features absolute encoders and is therefore the first measuring arm which does not require referencing before measurement. When the arm is turned on, it’s ready to go.Quality control, inspection, on-machine verification, reverse engineering, virtual assembly or 3D modelling. Wherever these needs arise, you will find the ROMER Absolute Arm. Much more than just a metrology tool, its value lies in its versatility.Portability, stability, light weight and high-performance laser scanners make the ROMER Absolute Arm an all-purpose 3D measurement, analysis and digitising tool that can be used by anyone, anywhere and with minimum training.Unlike many metrology devices, the ROMER Absolute Arm does not require warm-up time or initialization, thanks to a stable carbon fiber structure and industry leading Absolute encoders. Simply take the measuring arm to the part, switch it on and start measuring.
-
Product
Lab Coating Machine
-
Dongguan Kejian Instrument Co., Ltd.
This machine is designed for checking the performance of water based adhesive material or similar material on lab or quality department. Trial coating tests are conducted to demonstrate the ability meet any special requirements of our customers.
-
Product
Machine Vision
-
We design and integrate machine vision systems into your production line. Take your quality control to the next level!
-
Product
For Machining Center
-
We offer the ATC Run-Out Detection System and the Wireless Bore Gauge. We will boost the realization of increased productivity with high precision measurement technology.
-
Product
Model DC-2000-BP: Baled Paper Moisture Meter
DC-2000-BP
-
Portable hand-held moisture meter provides fast and accurate digital read-out in the range of 5% to 25%. Microprocessor based with large LDC display for easy reading. Pocket-size, weights less than 1lb.
-
Product
Advanced Measurement and Modeling Software
IVCAD MT930 Series
-
IVCAD advanced measurement and modeling software, offered by Maury Microwave and AMCAD Engineering supports multiple load pull techniques including traditional load pull using external instrumentation, VNA-based load pull, active load pull and hybrid load pull. It performs DC-IV and pulsed-IV measurements and incorporates device modeling tools. Its modern visualization capabilities give users a greater ability to view, plot and graph measurement data in an intuitive manner.
-
Product
Machine Vision Computers - GPU-ready Platform for AI and Intensive Computing, PCIe Gen 3 slots
Neousys Nuvo-8xxx Series
-
The Nuvo-8xxx computing platform is specially designed for the creation of machine vision systems using artificial intelligence. The combination of built-in PoE + and USB 3.0 interfaces, GPU (RTX30 and Tesla T4) and expandability make Nuvo-8xxx an excellent platform for demanding AI-powered machine vision applications.
-
Product
X-ray Analytical Microscope Super Large Chamber Model
XGT-9000SL
-
- Large chamber capacity (W x D x H) : 1030 mm x 950 mm x 500 mm- X-ray shield complying with JAIMAS0101-2001/ IEC1010-1 to protect you from X-ray exposure- Mapping area size up to 350 x 350 mm2- <15 µm spot size with ultra-high intensity without compromising sensitivity and spatial resolution- Dual types of detectors for transmission and fluorescent X-rays- Detectable element range down to C with a light element detector and He purge module
-
Product
Software Module for Validating CAD Model Translations Directly in Verisurf
Verisurf Validate
-
Your in-house Engineering or external customer can send their native CAD file from any design platform, and with a Verisurf translator read it directly into Verisurf eliminating double-translation (the first translation out from the native CAD system, followed by a second translation into Verisurf for your CMM work). CAD options are: CATIA V5 & V6, NX, CREO, JT, & STEP AP242 with MBD. (Note that IGES, STEP, SolidWorks, Autodesk, AutoCAD and several others come included automatically with Verisurf at no extra charge.)
-
Product
Traction Battery Short Circuit Test Machine
-
Guangdong Bell Experiment Equipment Co.,Ltd
Traction Battery Short Circuit Test Machine Relevant standards requirement:Single Storage Cell Safety Test6.2.4 Short circuitCharge the single storage cellaccording to 6.1.3 standardThe cellis to be short-circuited by connecting the positive and negative terminal with a external resistance of less than 5mΩ for 10 minObserve for 1HBattery module safety test6.3.4 Short circuitCharge the battery module according to standard 6.1.4The battery module is to be short-circuited by connecting the positive and negative terminal with a external resistance of less than 5mΩfor 10 minObserve for 1H
-
Product
Machine Vision Camera - 1.3 MP, 149 FPS, PYTHON 1300, Color
Chameleon3 USB3
-
The Chameleon®3 camera family combines the ease-of-use of USB3, small size, flexibility of board-level versions, and popular CCD and CMOS image sensors into an affordable package. For FLIR cameras with the latest sensors and most advanced feature sets, please refer to Blackfly S and Oryx camera families.
