Product

Event Detectors

105/106 Series

-

Analysis Tech Inc.

105/106 Series - Analysis Tech Inc.

The 105/106 Series Event Detectors are the most versatile Event Detectors in the product line. These Event Detectors monitor the electrical resistance of up to 128 simple continuity loops, each comprised of single or multiple specimens under test. Each test specimen is continuously monitored while a selectable DC sense current is passed through each channel test-loop; resistance changes exceeding the selected threshold are recorded as an event. Minimum Event Duration, Channel Current, and Threshold Voltage settings can all be independently configured. 105 and 106 Series instruments are electrically identical, with the difference simply that the 105 offers four, 32-channel board slots and the 106 offers only one. Thus the 128-105 is equivalent to four 32-106 Event Detectors.

Product

Safety Liquid Leak Sensor [Control Category 4PLE SIL3]

SQ4 Series

-

Panasonic Industrial Devices Sales Company of America

SQ4 Series - Panasonic Industrial Devices Sales Company of America

The SQ4 Series Safety Liquid Leak Sensor detect leaks and curbs danger resulting from them.The two-part design, consisting of the Sensor and the mounting bracket, simplifies installation. The Sensor itself incorporates a two-stage detection. The detection unit at the front of the Sensor issues a warning if it comes into contact with liquid, and the detection unit in the center of the Sensor initiates an emergency stop if it becomes immersed in liquid.To provide utmost flexibility, a chemically resistant version is also available. Up to 4 Safety Liquid Leak Sensors can be connected to the SQ4-C11 Controller.

Product

Digital Multimeter

MDM-200 Series

-

Matrix Technology Inc.

MDM-200 Series - Matrix Technology Inc.

The MDM-200 Series of instruments can measure parameters including AC/DC voltage, DC current, resistance, diodes, carry out on-off tests, zero-line judgement, non-contact voltage detection and the true effective value of AC. It is a tool with excellent performance; the ideal tool for laboratories, factories, radio enthusiasts and when carrying out home improvements.

Product

Inductive Load Tester

4602-LV

-

TESEC, INC

4602-LV - TESEC, INC

There is a tendency that MOSFET has Low On Resistance so that it demands that Inductive Load Tester to have higher forcing current for measurement. The forcing current is limited by forcing voltage with previous test method. Thus it becomes difficult to test this kind of middle power range devices.

Product

Wyzenbeek Abrasion Tester

TF212

-

TESTEX Testing Equipment Systems Ltd.

TF212 - TESTEX Testing Equipment Systems Ltd.

Wyzenbeek Abrasion Tester，to determine the abrasion resistance of fabrics when rubbed against a standard abradent or a wire mesh screen with a backward and forward motion over a curved surface. Wyzenbeek Machine complies with ASTM D4157, etc. Please contact us for more information about Wyzenbeek methods.

Product

Short Circuit Test System

-

Shanghai Guantu Technology Co., Ltd.

Shanghai Guantu Technology Co., Ltd.

The short-circuit test system refers to what kind of short-circuit test is carried out by which equipment, and how long is the test time. But I have one thing to tell you, the short circuit test is a kind of destructive test, mainly to test the working condition of the used equipment in a crisis situation, or to test how strong the anti-destructive ability of the used equipment is. Just like a lot of equipment in the military must undergo a short-circuit test, some for 3 minutes or longer, in order to resist breaking calls against the enemy during wartime.

Product

Temperature And Humidity Chambers

-

Dongguan Amade Instruments Technology Co., Ltd

Dongguan Amade Instruments Technology Co., Ltd

Temperature and humidity chamber is also referred to as climatic chamber, programmable temperature humidity chamber, constant environmental test chamber, constant humidity chamber, temperature and humidity controlled cabinet etc. It Is capable of simulating the range of temperature & humidity fluctuating from an extremely low value of -70℃ & 20% R.H to an exceeding high value 150℃ & 98% R.H which products may be exposed to in the natural environment. Constant temperature&humidity testing machine can be used to measure the resistance of specimens to withstanding extremely high temperature, low temperature, constant temperature, high humidity, low humidity or various programmed combinations. Applied to all materials and product which are sensitive to temperature and humidity, such as electronics, appliances, cell phones, communications, instruments, vehicles, plastics, metals, foods, chemical products, construction materials, medical products, aerospace components etc.

Product

CableEye Tester Calibration Verification Board | Cable & Harness Tester

CB50

-

CAMI Research Inc.

CB50 - CAMI Research Inc.

Populated with precision resistors, it allows users to determine empirically whether the tester requires calibration. The CB50 may be used on all CableEye models. The CB50 is intended for periodic verification of tester calibration. To ensure that resistance measurements remain accurate, CAMI recommends yearly calibration. However, depending on environmental conditions and usage, testers may need calibrating more or less frequently.

Product

Sensors for Mobile Machines

-

ifm efector, inc.

ifm efector, inc.

*Inclination sensors with CAN or analog interface*Inductive sensors with high protection rating*Pressure sensors with a robust measuring cell for mobile hydraulics*High shock and vibration resistance*Wide operating temperature range

Product

Portable 4-Gas Monitor

PS200

-

Teledyne Gas & Flame Detection

PS200 - Teledyne Gas & Flame Detection

The PS200 Series combines quality, ruggedness and advanced technology in a user friendly, portable gas monitor. It is compact, lightweight, water resistant, extremely robust, and is certified to multiple international and regional standards.The PS200 can measure any combination of LEL, ​O2, CO and H2S making it suitable for a wide range of personal monitoring and confined space applications.In addition to extensive datalogging capabilities, the PS200 is available with an optional internal pump and an extensive range of accessories to meet a wide variety of user applications.Importantly, the PS200 has been des​​igned to enable easier user maintenance which includes a fully automatic calibration station to simplify product compliance.

Product

Insulation Resistance Measurement

MI15KVe

-

Scope T&M Pvt, Ltd.

MI15KVe - Scope T&M Pvt, Ltd.

The MI-15KVe High-Voltage insulation tester is a truly portable device that allows the measurement of insulation resistances using test voltages up to 15kV.

Product

(25kN) Fatigue Testing Systems

8872

-

Instron

8872 - Instron

The 8872 fatigue testing system is ideal for fatigue and static testing of biomedical, advanced materials, and manufactured components. The servohydraulic actuator is conveniently located in the crosshead for easy table mounting. The T-slot base makes it easy to secure orthopaedic specimens, automotive components, and manufacturing assemblies. The adjustable crosshead, actuator-mounted load cell, and corrosion resistant T-slot base with unique drain channel are essential for testing biomedical specimens immersed in a saline bath.

Product

Near Field Probes 30 MHz up to 3 GHz

RF1 set

-

Langer EMV-Technik GmbH

RF1 set - Langer EMV-Technik GmbH

The RF1 near field probe set consists of 4 passive near field probes for making measurements in the development phase of E-field and magnetic field in the ranges of 30 MHz to 3 GHz on electronic assemblies. The probe heads of the RF1 set allow for measurements close to the electronic assemblies, e.g. on single IC pins, conducting paths, components and their connectors in order to localize interference sources. Field orientation and field distribution on an electronic assembly can be detected through a trained special use of the near field probe. The near field probes are small and handy. They have a sheath current attenuation and are electrically shielded. They can be connected to a spectrum analyzer or an oscilloscope with a 50 Ω input. They do not have an internal terminating resistance.

Product

LCR Meters

-

Uni-Trend Group Limited

Uni-Trend Group Limited

A type of electronic test equipment used to measure the inductance, capacitance, and resistance of an electronic component.

Product

Marine Logging System

SuperSting Marine

-

Advanced Geosciences, Inc.

SuperSting Marine - Advanced Geosciences, Inc.

The SuperSting Marine continuously records and stores data from a GPS receiver. Current is injected every 3 seconds and 8 apparent resistivity values representing 8 depth levels are read for each current injection. Depth of penetration depends on length of the cable and array type. Typically you will see down to aproximately 20% of the electrode spread length.

Product

Advanced Multimeter

7117

-

Peaceful Thriving Enterprise Co Ltd

7117 - Peaceful Thriving Enterprise Co Ltd

This is a low power consumption, high accuracy and stable hand held 6000 counts multi-meter; with special designed IC to support true RMS measurement. It performs measurements of DC voltage/current, true RMS AC voltage/current, resistance, capacitance, frequency, diode, continuity, temperature and non-contact voltage sensing.