Product

For Overhead Distribution Line Current Tester With Power Flow Direction Record

MHR-600

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

MHR-600 - MULTI MEASURING INSTRUMENTS Co., Ltd.

・Measuring and recording the average current values & power flow directions in the setting interval.・Easy to use, as an indirect hot-line work tool.・Memorized data can be outputted to USB memoryafter measurement.・For 6.6KV circuit, protection level IP64.

Product

Bias Network, 45 MHz to 50 GHz

11612B

-

Keysight Technologies

11612B - Keysight Technologies

The Keysight 11612B broadband high power bias network can be used in a wide variety of biasing applications for test and measurement requirements in laboratory and production environments. Bias networks provide the means of supplying dc bias to the center conductor of the coax connector for your device while blocking the dc to the RF port.

Product

High Current Electronic Load (600W-1200W)

ELCH600 & ELCH1200

-

Aplab Limited

ELCH600 & ELCH1200 - Aplab Limited

- Low lead resistance <5m Ohm for Fuel-cell- Battery Testing- VFD display- High resolution 0.1mA/1mV- Voltage range 0V to 500V- Working mode CV/CC/CW/CR- OV/OC/OP/OT protection- Communication: USB/RS232/GPIB

Product

Through Hole Type AC Current Sensor

CTF-400B

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

CTF-400B - MULTI MEASURING INSTRUMENTS Co., Ltd.

*For AC current and power measurements.*Suitable for current measurements of main cable.*Measuring range:AC 1A～400A.

Product

Tunnel Diode Zero Bias Detectors

-

Pasternack Enterprises, Inc.

Pasternack Enterprises, Inc.

A tunnel diode zero-bias detector is a device that converts microwave and millimeter-wave radio frequency (RF) signals into a DC voltage without requiring an external power source

Product

30A, 100MHz High Sensitivity Current Probe

CP031A

-

Teledyne LeCroy

CP031A - Teledyne LeCroy

Teledyne LeCroy current probes are available in a variety of models for a wide range of applications. The full range of Teledyne LeCroy current probes includes models with bandwidths up to 100 MHz, peak currents up to 700 A and sensitivities to 1 mA/div. Teledyne LeCroy current probes are often used in applications such as the design and test of switching power supplies, motor drives, electric vehicles, and uninterruptible power supplies.

Product

GAOTek Portable H/L Voltage Clamp Current Leaker

GT00YA00ZX

-

GAO Tek Inc.

GT00YA00ZX - GAO Tek Inc.

The GAOTek Portable H/L Voltage Clamp Current Leaker measures high voltage current with a 12.5 in (32 cm) insulating rod, adopting the latest CT technology and integrating mask digital technology. This instrument provides high precision, reliability, and stability with its integrated design between transducer clamp and domain. This leaker can be used to measure any wire with or without the insulation layer where the voltage is below 10 kV. The insulating rod is portable, moisture resistant, heat resistant, shock resistant, and insulating. It provides additional functionalities such as online current testing, peak and data holding, data storage, detection of high and low current in primary and secondary circuits separately, and provision of suitable calculations to conclude change in high and low pressure.

Product

Clamp type AC Current Sensor／with DC Voltage Output

RCT-18

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

RCT-18 - MULTI MEASURING INSTRUMENTS Co., Ltd.

Leakage current measurements with DCV output for recorder. AC 0.1mA～100mA.

Product

Closed Loop Hall AC/DC Current Sensor

CYHCS-D8

-

ChenYang Technologies GmbH & Co. KG

CYHCS-D8 - ChenYang Technologies GmbH & Co. KG

This Hall Effect current sensor is based on closed loop compensating principle and can be used for measurement of DC and AC current, pulse currents etc. The output of the transducer reflects the real wave of the current in the carrying conductor.

Product

DC Leakage Current Monitor

MDLA-100

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

MDLA-100 - MULTI MEASURING INSTRUMENTS Co., Ltd.

This DC Leakage Current Monitor constantly observes leakage current of DC circuit like as PV generation system, etc. and lights up the warning lamp with signal output, when the leakage current exceeds the setting value.

Product

AC Current Probes

CWT

-

Power Electronic Measurments Ltd

CWT - Power Electronic Measurments Ltd

The CWT Rogowski current probe is suitable for measuring AC currents ranging from 300 milliamps to hundreds of kA from below 0.1Hz to >30MHz.

Product

Mini AC Leakage Current Clamp Tester (CE)

M-140

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

M-140 - MULTI MEASURING INSTRUMENTS Co., Ltd.

*40mmφCT window and ultra compact size.*Least affection from the external magnetic field.*Wide current measurements.(AC0.01mA-300A)

Product

Current Sensors

-

Measurlogic

Measurlogic

Measurlogic offers an array of current sensors for every need, including split core, solid core and Rope current transformers (CTs); DC Shunts and Hall Effect Sensors. All of our electrical sensors are designed with an easy, un-intrusive installation in mind. With a low cost and high accuracy guarantee, we provide top of the line solutions for measurement and cost savings for residents and business owners alike.

Product

Current Probe

LFR

-

Power Electronic Measurments Ltd

LFR - Power Electronic Measurments Ltd

The LFR is ideal for power quality applications. It has a small, predictable phase error, for power measurements at 45/65Hz. The wide bandwidth allows accurate measurement up to and even above the 400th harmonic.

Product

Bias Boards

CUBE

-

XGLab S.R.L.

CUBE - XGLab S.R.L.

The CUBE Bias Boards are a set of off-the-shelf biasing boards developed to speed-up the integration process of the CUBE CMOS preamplifier family of XGLab. These boards allow to bias both the detector (SDD as standard, other detector upon request) and the CUBE preamplifier.

Product

Leakage Current Measurement

CX-2675C3

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-2675C3 - Shenzhen Chuangxin Instruments Co., Ltd.

Leakage Current Measurement Output voltage:0~250V (AC/DC)

Product

Digital Volt Or Current Meter

CS1/CS2-VA

-

Power True Systems Corp.

CS1/CS2-VA - Power True Systems Corp.

Measuring Voltage or Current for DC / AC / TRMS Accuracy: DC: +/-0.04% or AC: +/-0.1%; Display range: -19999~29999 User function, Easily programmable via the front panel. 1 relay, 1 Analogue output or RS 485 communication port in option with flexible functions. CE approved

Product

Leakage Current Clamp Mete

-

Nanjing ELIKE Meter Co, Ltd.

Nanjing ELIKE Meter Co, Ltd.

Basic functions:AC current:20mA resolution: 0.01mA, ± (2.5%, +5)200mA resolution: 0.1mA, ±(2.5%, +5)2A resolution: 1mA, ±(2.5%, +5)60A resolution: 100mA, ±(3%, +8）AC voltage: 600V, ±(0.8%, +5)DC voltage: 600V, ±(0.8%, +5)Special functions:Auto ranging Low battery display Data hold Auto power-off Over-load protection Input impedanceDC voltage measurement: ≥10MΩ Sampling frequency: 3 times/s Maximum display: 1999 Maximum distance between clamps: 30mm General characteristics:Product colors: iron-gray and redProduct net weight: approximately 136gLCD size: 25x36mmProduct size: 183x63x29mmPower: 2x1.5V, 7#Standard accessories: packing carton and handheld bag English user's manual and battery

Product

FaithTech Ultra Low Voltage And High Current DC Load

NZ/N Series

-

Shenzhen FaithTech Technology Co., Ltd.

NZ/N Series - Shenzhen FaithTech Technology Co., Ltd.

Ultra low voltage and high current DC electronic load is a high reliability and high performance electronic load product derived from FT conventional electronic load for low voltage and high current test scenarios such as fuel cell test and CPU power supply device test. For different current levels, this product includes two series: NZ and N. The voltage is 0-20V or 40V, in which the NZ series can be loaded with 0V full current, and the N series can be loaded with ultra-low voltage and full current. The load capacity is up to 0V@1200A and 0.2V@5000A . This series of products has high precision and high cost performance, which is your good choice for testing.