Product

Small, High Performance InGaAs Camera With Low Noise And High Dynamic Range

Wildcat 640 Series

-

Xenics

Wildcat 640 Series - Xenics

The Wildcat 640 series is based on an in-house developed, temperature stabilised InGaAs detector with a 640 x 512 pixel resolution. The Wildcat 640 cameras are offered with high frame rate of up to 220 Hz. The camera comes with a CameraLink or USB3 Vision interface and features low weight and power.

Product

White Box Testing

-

Precise Testing Solution

Precise Testing Solution

Does your application have legacy code and your software code messy? If the answer to the above questions is ‘Yes’, your application will fail to perform as expected. Under such cases, you need to optimize the internal structure of your application so that it performs well. To test for the errors in the internal structure opt for white-box testing.

Product

Noise Legislation Assessment Kit - Sound Meter And Dosemeter

05NK006

-

Castle Group Ltd.

05NK006 - Castle Group Ltd.

This system provides you with everything you need for noise risk assessments for noise legislation in one small package. A sound meter, dosemeter and calibrator kit featuring projected daily noise exposure from one short measurement and true peak for monitoring peak action levels.

Product

Surface Mount Noise Sources

-

Pasternack Enterprises, Inc.

Pasternack Enterprises, Inc.

Surface Mount Noise Sources from Pasternack

Product

Automotive Noise Finder

7632

-

Peaceful Thriving Enterprise Co Ltd

7632 - Peaceful Thriving Enterprise Co Ltd

This is a portable automotive noise finder which can quickly detect source or location of noises emanated from bearing, gear, valve, valve body, crankshaft, cylinder, gearbox, car body and more parts after staring engine. It helps the serviceman to find out the actual noise part even in severe ambient noise.

Product

Noise Source, 1 GHz up to 50 GHz

346CK01

-

Keysight Technologies

346CK01 - Keysight Technologies

The Keysight 346CK01 is the ideal companion to Keysight´s noise figure solutions when working on high frequency applications. Since it is broadband (1 GHz to 50 GHz), it eliminates the necessity for several sources at different frequency bands. The low SWR of the noise source reduces a major source of measurement uncertainty, which are reflections of the test signals. This is a coaxial noise source with a 2.4 mm coaxial connector. ENR typically 20 dB at 1 GHz, decreasing to typically 7 dB at 50 GHz.

Product

Noise Receiver Modules And Noise Switching Modules

MT7553 Series

-

Maury Microwave Corporation

MT7553 Series - Maury Microwave Corporation

Noise Parameters are the non-50Ω extensions of Noise Figure, and are an important modeling and model validation tool to understand how a device-undertest’s performance changes as a function of source impedance. Noise Parameter measurements are typically performedusing a Vector Network Analyzer (VNA) to measure the S-Parameters of the DUT, and a Noise Analyzer (either Noise Figure Analyzer NFA or Spectrum Analyzer SA) to measure the noise power of the DUT. Noise parameters are calculated from a combination of knownsource impedances, S-parameters and noise powers.

Product

Broadband Calibrated Noise Sources

-

Fairview Microwave Inc.

Fairview Microwave Inc.

Fairview Microwave’s calibrated noise sources cover frequency bands from 10 KHz to 18 GHz. Their performance specifications include output ENR levels ranging from 15 dB to 30 dB and typical VSWR levels as low as 1.25:1. Depending on the model, calibrated frequency points are at 10 MHz, 100 MHz, 1000 MHz, 2000 MHz and 1 GHz steps. The temperature coefficient of these noise sources is < 0.01 dB/°C and noise output variation is < 0.1 dB/%V.

Product

Low Phase Noise Amplifiers

-

Pasternack Enterprises, Inc.

Pasternack Enterprises, Inc.

Pasternack's low phase noise amplifiers cover select frequency bands ranging from 1.5 to 18 GHz with residual phase noise levels as low as -180 dBc/Hz @ 10 KHz offset. Additional performance specs include small signal gain ranging from 9 to 14 dB, with typical noise figure of 5.5 dB. Psat levels for these amplifiers range from +16 to +25 dBm with Output IP3 levels as high as +34 dBm. All models feature single DC voltage supplies and input/output RF ports are internally matched for 50 ohms with DC blocking capacitors. These compact module assemblies require no external components and are available in rugged Kovar metal drop-in packages that are gold-over-nickel-plated and support field replaceable SMA connectors. All models are EAR99 and guaranteed to meet MIL-STD-883 test conditions for hermeticity and temperature cycle.

Product

Optical Noise Analyzer

A0040A

-

SYCATUS Corp

A0040A - SYCATUS Corp

Optical Noise Analyzer is the industry first solution for evaluation of optical frequency noise of lasers as power spectrum density.

Product

Phase Noise Measurement Solution, 50 kHz to 110 GHz

E5505A

-

Keysight Technologies

E5505A - Keysight Technologies

The Keysight Technologies E5500 Series of phase noise measurement solutions offers the most flexible set of measurements on one-port VCOs, DROs, crystal oscillators and synthesizers. Two-port devices, including amplifiers and converters, plus CW, pulsed and spurious signals can also be measured. The E5500 measurements include absolute and residual phase noises, AM noise, and low-level spurious signals. The stand-alone instrument architecture easily configures for various measurement techniques, including the PLL/reference source technique, residual and FM discriminator methods.

Product

Environmental Noise Monitors

-

Cirrus Research plc

Cirrus Research plc

Our noise monitoring equipment is used across a wide range of applications and location. Each of these systems has been designed to meet the exact needs of the user by combining noise monitors with a software and support package.

Product

Noise Meters

-

PCE Instruments

PCE Instruments

Here you will find a full range with an industrial standard noise meter / sound meter to suit every requirement. With the portable noise meter you can carry out measurements quickly to gain control of a situation or to set the sound meter to take timed measurements. The noise meter is important for all industries, especially by using it as a mobile noise meter which is able to assess office stress levels or street noise levels. Often problems arise from noisy neighbors or if bars and restaurants are in residential areas and produce noise levels after 10 pm in excess of what local laws permit. A noise meter / sound meter will help here.We can assess which noise meter or sound meter you require in relation to the issue you have and the relating laws (requirements regarding a sound meter and a sound meter’s usage vary depending on the country). We also have noise meter microphone extension cords, tripods, sound meter calibrators and calibration certificates for most noise meter models.

Product

Noise & Vibration Analyzers

-

WinTek s.a.s.

WinTek s.a.s.

The NVA instrument is generally composed of a personal computer equipped with one or more data acquisition board, a conditioning interface and / or to the transmitters power and finally a series of libraries of application software dedicated to the type of measurement to be made. the type of personal computer can be either a desktop, notebook or portable and depending on the particular requirements, you can use the PXI architectures.

Product

Additional Products: Standard Voltage 9 Pin D-Type Connectors

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

The connectors below are not compatible with Pickering products, however, are offered for developing a connection solution for use with other products.

Product

Noise Figure Analyzer, Multi-touch, 10 MHz to 3.6 GHz

N8973B

-

Keysight Technologies

N8973B - Keysight Technologies

The N8973B high performance noise figure analyzer is designed to make fast, accurate and repeatable noise figure measurements. When paired with an SNS Series noise source and U7227 Series USB preamplifier the ENR data from the SNS and USB preamplifier data automatically downloads into the N8973B.

Product

Low Noise Accelerometer Cables & Coaxial Sensor Cables

-

Kemo

Kemo

Our cable assembly team in the UK produce the highest quality cable assemblies for use with a wide range of sensing and measurement applications. By making the cable assemblies in our own factory we are able to ensure the quality of every connection and every assembly, each cable is fully tested and its capacitance checked. Due to our experience in signal conditioning we understand the critical elements to quality signal analysis, this includes the correct cable. This is particularly true for accelerometer cables and sensors cables which can introduce significant noise issues if not used correctly.

Product

Noise and Vibrations Meters

dB alert

-

PASI srl

dB alert - PASI srl

Monitoring / Noise and vibrations meters

Product

Two Channel Phase and Amplitude Noise Analyzer

DCNTS -190

-

Eastern-Optx

DCNTS -190 - Eastern-Optx

The DCNTS is a two channel Phase and Amplitude noise analyzer. Its dual demodulator architecture allows the system to use cross-correlation to cancel its internal noise and limitation; it is like comparing the outputs of 2 systems and only display the similarities while rejecting differences. Its main extension is the Residual Noise measurement front-end which includes all necessary hardware to automatically measure residual noise on 2-ports devices either in RF frequencies or microwave. It could be a frequency multiplier or divider, an amplifier or any other phase coherent input to output device.

Product

Super Low Noise Amplifiers

WCA Series

-

WanTcom Inc.

WCA Series - WanTcom Inc.

WCA series super low noise amplifiers have sub-0.5 dB noise figure at VHF band with several octave bandwidth. The amplifiers have 75 Ohm impedance.

Product

USB TESTER, 3-9V, 3A, WHITE

72-13540

-

Tenma

72-13540 - Tenma

*USB tester inspects USB charger & portable power source*Lightweight and portable*LCD backlight*High/low output voltage warning*10 sets of data memory

Product

Noise Sources

NC3208

-

DVTest Inc.

NC3208 - DVTest Inc.

It offers a high ENR output AWGN noise over a wide frequency range. This Noisecom noise source has excellent stability with temperature and voltage for tough environments. It contains a hermetically packaged noise diode that has been pre-selected for special performance characteristics. This module is ideal for many different applications including radar warning receivers (RWR), built-in test equipment (BITE), military aircraft, and Wi-Fi.