Product

Fiber Optic Type Chemical Solution Concentration Monitor

CS-100F1 Series

-

HORIBA, Ltd.

CS-100F1 Series - HORIBA, Ltd.

The CS-100F1 Series is equipped with fiber optics cable based on the CS-100 Series. It offers real-time, in-line measurements by directly integrating the sample cell into the cleaning system piping and by using a fiber optic cable for light signal transmission. A single concentration monitor can take up to four measurements and monitoring of multiple chemical solutions in a single-bath or single-wafer cleaning system is also possible.

Product

In-Line Isolator Single Stage 1310nm Bare Fiber 250μm Without Connector

IL-S-31-25-05-OO-3422

-

Guilin GLsun Science and Tech Group Co., LTD

IL-S-31-25-05-OO-3422 - Guilin GLsun Science and Tech Group Co., LTD

Center Wavelength 1310 nm PDL ＜0.1 dBPMD 0.25 ps Dimension Φ3.4×22 mmOperating Temperature -5 to +70°C Storage Temperature -40 to +85°C

Product

Precision Fiber Optic Cleaver With Scrap Collector

HW-05C

-

Shanghai Fibretool Technology Co.,Ltd.

HW-05C - Shanghai Fibretool Technology Co.,Ltd.

The HW-05C Fiber Optic Cleaver gives you high precision at low cost. This compact and easy to use cleaver is perfect for all cleaving applications, from fusion splicing to mechanical splicing and field installing quick termination connectors. The HW-05C works with both 250um coated and 900um buffered fibers.

Product

Fiber Optic Connectivity

-

AFL

AFL

Complete line of optical connectivity products for your network needs

Product

Omicron Fiber Optic Connector

-

Teledyne Marine Impulse-PDM

Teledyne Marine Impulse-PDM

Teledyne Impulse-PDM’s Omicron 5030/5070 optical connectors utilize proven small form factor ferrule technology and are available for multi-mode or single-mode operation.The connectors are offered, as standard, in stainless steel to BSEN10088-3 Grade 1.4404 (316L), which is electro-polished to remove surface contamination, thus improving resistance to corrosion. Connector bodies can also be manufactured in other materials, either to address specific anti-corrosion requirements, or to increase depth rating. Engaging nuts are normally manufactured in naval brass to UNS C46400​.

Product

Fiber Identifier

OFI-20A

-

ShinewayTech

OFI-20A - ShinewayTech

OFI-20A can detect optical signal presence, type and direction anywhere on fibers during optical network deployment, maintenance and troubleshooting. With non-destructive macro-bend detection technology, it introduces no damage to tested fiber or interference to the service on fiber. OFI-20A is able to identify wide-spectrum signals (such as signals in CATV system) and can be used in SONET/SDH & DWDM systems tests.

Product

RS232 / RS485 / RS422 To Fiber Optic Converters

-

CommFront Communications

CommFront Communications

Our rugged, industrial-grade, point-to-point RS232 / RS485 / RS422 serial to fiber optic converters work in pairs to extend serial signals (RS232, RS485, RS422, and TTL) over long distance. These point-to-point RS232 / RS485 / RS422 serial to fiber optic converters have been designed for harsh industrial environments and withstand a wide temperature of -40°F to 185°F (-40°C to 85°C),  and they come with the options of multi-mode (extend distance up to 3 miles / 5km) and single-mode (extend distance up to 25 miles / 40 km), and ST, SC, and FC connectors.

Product

Optical Fiber Splicing Tool Kit

SAT-02B

-

Shaanxi Aitelong Technology Co., Ltd

SAT-02B - Shaanxi Aitelong Technology Co., Ltd

SAT-02B Tool kit is wonderful for optical fiber fusion splicing. It includes the most frequently required tools for preparation and cleaning optical fibers before cleaving and splicing. And well fits to Aitelong model SAT-17S and SAT-17M fusion splicers.

Product

1.5µm PM Ev-Yb Fiber Amplifier ( PM EYDFA )

HAPM5000

-

Hangzhou Huatai Optic Tech. Co., Ltd.

HAPM5000 - Hangzhou Huatai Optic Tech. Co., Ltd.

Huatai HAPM5000 is a C-Band Polarization Maintaining Optical Amplifier which worked in 1540~1570nm operating wavelength. Adopt Polarization Maintaining (PM) Multiclad Ev-Yb fiber, output optical power range 27~37dBm(0.5W~5W) ， extinction ratio >20dB.

Product

Large Bare Fiber Spools

-

M2 Optics, Inc.

M2 Optics, Inc.

*Custom lengths to 60km of optical fiber*Designed to fit spools in the most efficient manner*Portable for easy handling and protection*Organizes fiber while ensuring performance

Product

Optical Fiber 2×1 Switch

OFSW - 2 × 1

-

Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW - 2 × 1 - Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW-2 × 1 is a 2 × 1 prism optical switch. It can support 2 optical fibers input and 1 fiber output, channel switch. Wide operating wavelength range, low insertion loss and speedy switching rate, can use network trends configuration, network monitor and lab application.

Product

Fiber Optic Cable Assemblies

-

Amphenol Fiber Systems International

Amphenol Fiber Systems International

For applications demanding reliability, traceability and the highest level of quality, a complete plug-and-play cable assembly directly from the manufacturer offers the highest degree of confidence. For these most demanding applications, AFSI specializes in manufacturing custom cable assemblies with quality components and industry-leading workmanship. AFSI is able to assist in designing and producing custom cable assemblies from a set of requirements or building to a customer print. Our highly skilled technicians are trained to a wide variety of industry standard procedures critical to manufacturing harsh environment fiber optic cable assemblies. All AFSI cable assemblies are manufactured by expert technicians in our state-of-the-art, AS9100 certified facility.

Product

Optical Fiber Cable Testing Equipment

-

Torontech Group

Torontech Group

Optical fiber consists of a core and a cladding layer, selected for total internal reflection due to the difference in the refractive index between the two. In practical fibers, the cladding is usually coated with a layer of acrylate polymer or polyimide. This coating protects the fiber from damage but does not contribute to its optical waveguide properties. Individual coated fibers then have a tough resin buffer layer and/or core tube(s) extruded around them to form the cable core. Several layers of protective sheathing, depending on the application, are added to form the cable. Rigid fiber assemblies sometimes put light-absorbing ("dark") glass between the fibers, to prevent light that leaks out of one fiber from entering another. This reduces cross-talk between the fibers, or reduces flare in fiber bundle imaging applications Optical fibers are very strong, but the strength is drastically reduced by unavoidable microscopic surface flaws inherent in the manufacturing process. The initial fiber strength, as well as its change with time, must be considered relative to the stress imposed on the fiber during handling, cabling, and installation for a given set of environmental conditions. There are three basic scenarios that can lead to strength degradation and failure by inducing flaw growth: dynamic fatigue, static fatigues, and zero-stress aging.

Product

1 Channel VGA Over Fiber Transmitter and Receiver Extender

L-1VGA-FE

-

QuestTel

L-1VGA-FE - QuestTel

The QuestTel L-1VGA-FE Fiber Optic Transmitter and Receiver provides long haul transmission of high resolution VGA and Audio control signals over a single fiber up to 20km.

Product

Compact Fiber Seeders

LightWire FPS Series

-

EKSPLA

LightWire FPS Series - EKSPLA

LightWire FPS series fiber lasers are dedicated for seeding solid state Nd:YAG amplifiers. Compact, cost efficient FPS series models deliver sub‑10 ps pulses at 1064 nm wavelength with the average output power up to 200 mW and pulse energy up to 50 nJ.

Product

Fiber Optic Rotary Joints

-

Everaxis

Everaxis

Fiber Optic Rotary Joints ensure flawless high-speed data transmission even in environments with strong electromagnetic interference. They are a maintenance-free alternative that eliminates friction and/or heating between rotating and stationary components.

Product

Telecom & Fiber Sensing

-

BaySpec, Inc.

BaySpec, Inc.

BaySpec designs, manufactures and markets advanced spectral instruments and light sources for the telecommunications and fiber optic sensing industries, with more than 35,000 units deployed around the globe. These products include: optical channel performance monitors (OPM, OCPM, OCM), optical spectrum analyzers, erbium-doped fiber amplifiers, fiber Bragg grating interrogation analyzers, broadband light sources, amplified spontaneous emission (ASE) light sources, narrowband and wideband light sources, and volume phase transmission gratings.

Product

Fiber Optical Switch at Single Mode Latching 1310/1550nm 5V with LC/PC Connector

SUN-FSW-1x2

-

Guilin GLsun Science and Tech Group Co., LTD

SUN-FSW-1x2 - Guilin GLsun Science and Tech Group Co., LTD

GLSUN 1x1 Mechanical Optical Switch - Features·Low Insertion Loss·Wide Wavelength Range·Low Crosstalk·Epoxy-free on Optical Path·High Stability, High Reliability·Latching and Non-latchingGLSUN 1x1 Mechanical Optical Switch - Applications·R&D in Laboratory·System Monitoring·MAN (Metropolitan Area Network)·Network Security and Monitoring·OADMGLSUN 1×1 Optical Switch - SpecificationsParameters Unit SUN-FSW-1×1Wavelength Range nm 850±40 / 1300±40 1260 ~ 1650Test Wavelength nm 850 / 1300 1310 / 1550Insertion Loss 1,2 dB Typ: 0.5 Max: 0.8 Typ: 0.4 Max: 0.6Return Loss 1, 2 dB MM ≥ 30 SM ≥ 50Crosstalk 1 dB MM ≥ 65 SM ≥ 70PDL dB ≤0.05WDL dB ≤0.25Repeatability dB ≤±0.02Operating Voltage V 3.0 or 5.0Durability Cycles ≥ 10 MillionSwitching Time ms ≤8Optical Power mW ≤500Operating Temperature ℃ -20 ~ +70Storage Temperature ℃ -40 ~ +85Relative Humidity % 5 ~ 95Weight g 14Dimension mm (L)27.0×(W)12.6×(H)8.2 ±0.2Note: 1 Within operating temperature and SOP.2 Excluding Connectors.

Product

Fiber Optic Converter

RS-232

-

VI Control Systems Ltd.

RS-232 - VI Control Systems Ltd.

A simple and inexpensive RS-232 to fiber optic converter. 

Product

High Precision Fiber Cleaver - K7

-

Shanghai Fibretool Technology Co.,Ltd.

Shanghai Fibretool Technology Co.,Ltd.

High precision optical fiber cleaver K7 cuts optical fiber very precisely. K7 can be used for a wide range of holders for up to twelve ribbon cables as well as universal holders for 250um, 900um and 3.0mm fibers and flat cables. K7 fiber cleaver is easy and simple to operate in two steps to maximize work efficiency.K7’s superior cutting capability allow users to nail the most accurate cut and be prepared for the ideal fiber fusion splicing or other precision applications.

Product

L-Band Separate Raman Fiber Amplifier

RFA6000

-

Hangzhou Huatai Optic Tech. Co., Ltd.

RFA6000 - Hangzhou Huatai Optic Tech. Co., Ltd.

1. Erbium-doped Fiber Amplifier, due to the multiple cascades and the accumulation of noise caused by spontaneous emission, will reduce the system CNR greatly and thus it will limit the transmission capacity and distance of the system. Raman Fiber Amplifier (RFA) is a newly designed fiber amplifier based on Stimulated Raman Scattering (SRS) effect. It is considered as the core technology of new generation DWDM fiber over-long communication. Compared with Erbium-Doped Fiber Amplifier, Raman amplifier has the advantage of low Noise Figure (NF), wider gain bandwidth, flexible gain spectral region and stable temperature. It is the only device that can operate in 1300~1600 nm.