Product

Scanner Probe

RFS set

-

Langer EMV-Technik GmbH

RFS set - Langer EMV-Technik GmbH

The RFS set consits of three passive near field probes designed for the use in a measurement scanner during the development of E-field and magnetic field. They are designed for frequency ranges of 30 MHz to 3 GHz. The probe heads of the RFS set allow for close measurements needed to correctly localize interference sources on an electronic assembly. They document the whole image of the device under test`s near field. The scanner probes have a sheath current attenuation and are electrically shielded. They are connected to a spectrum analyzer or an oscilloscope with a 50 Ω input. They do not have an internal terminating resistance. The measuring signal can be increased with PA 203 or PA 303 preamplifier. On request RFS, LFS and XFS scanner probes can be produced.

Product

500 MHz Passive Probe for HDO4000, 10:1, 10 MOhm

PP018-1

-

Teledyne LeCroy

PP018-1 - Teledyne LeCroy

Passive probes are the standard probe provided with most oscilloscopes. Typical passive probes provide a 10:1 attenuation and feature a high input resistance of 10 MΩ. This high input resistance means that passive probes are the ideal tool for low frequency signals since circuit loading at these frequencies is minimized. Passive probes are designed to handle voltages of at least 400V, some as high as 600V. Teledyne LeCroy passive probes feature an attenuation sense pin which tells the oscilloscope to scale the waveforms automatically requiring no user input.Each passive probe is recommended for a certain oscilloscope, using the right passive probe with the right oscilloscope means that the probe will be properly compensated across the entire bandwidth. Using probes with a different oscilloscope will only let you compensate for low frequencies.

Product

Photoelectric Sensors

-

Omron Industrial Automation

Omron Industrial Automation

From long sensing range to oil resistance, Omron’s photoelectric sensing portfolio covers all the features required for advanced applications.

Product

Industrial PCs

-

Fastwel Group Co. Ltd

Fastwel Group Co. Ltd

Modern board architecture and robust mechanical design ensure capability of Fastwel BoxPCs to withstand high shock and vibration levels and demonstrate resistance to aggressive environment without operability loss.

Product

Leak Tester

LT-01

-

Jinan Leading Instruments Co., Ltd.

LT-01 - Jinan Leading Instruments Co., Ltd.

LT-01 Leak Tester is applicable in leak testing of pouches, bottles, pipes, cans and boxes of foodstuff, pharmaceutical, medical, daily chemistry, automotive, electronic components, stationary and other industries. It's also applicable in the leak testing of the specimens after falling tests and pressure resistance tests.

Product

STDETransformer Demagnetizer

STDE

-

Doble Engineering

STDE - Doble Engineering

This option allows neutralizing the residual magnetization of the power transformer core after the winding resistance test. The principle of the option is to apply a constant current of alternate polarities to the transformer winding, as per the IEEE 0062 1995 standard.

Product

Electronic DC Load, 500V, 16A, 400W

LDH400 Series

-

Aim-TTi

LDH400 Series - Aim-TTi

Versatile solution for direct testing of dc power sources and PFCsConstant current, resistance, conductance and power modesWide voltage and current range, 10 to 500V and 0 to 16A400 watts continuous dissipation at 28°C (360W at 40°C)High resolution and accuracy for level settingBuilt-in transient generator with variable slewCurrent monitor output for waveform viewingVariable drop-out voltage for battery testingHigh resolution backlit graphic LCD with soft key controlAnalogue remote control of levels and TTL control of on/off and transient switchingFront and rear input terminalsLoad inputs rated to CAT II (300V)Full bus control via USB, RS232 and LXI compliant LAN interfacesGPIB Option

Product

Electronic Resistance Store

MEMS5

-

Holding Informtest

MEMS5 - Holding Informtest

Mezzanine MEMS5 is designed to reproduce the values ​​of resistance to direct current through five channels independent and galvanically isolated from each other and from the case.

Product

HIGH VOLTAGE MEGOHMMETER

MI-10KVe

-

MEGABRAS srl

MI-10KVe - MEGABRAS srl

The MI-10KVe High-Voltage Megohmmeter is a truly portable device that allows the measurement of insulation resistances using test voltages up to 10 kV. It employs a state-of-the-art technology for the safe measurements of insulation resistances up to 2.000.000 MΩ with four test voltages: 1 kV - 2 kV - 5 kV and 10 kV.

Product

Slip Testing (Articulated Strut) (Mark II)

SG-P07MII

-

Jinge Testing Machine Co.,Ltd

SG-P07MII - Jinge Testing Machine Co.,Ltd

It's used to determine the slip resistance of footwear sole, heel or related materials against planar walkway surface or walkway surrogates under dry, wet or contaminated conditions.

Product

SparkFun Qwiic Scale

NAU7802

-

SparkFun Electronics

NAU7802 - SparkFun Electronics

The SparkFun Qwiic Scale is a small breakout board for the NAU7802 that allows you to easily read load cells to accurately measure the weight of an object. By connecting the board to your microcontroller you will be able to read the changes in the resistance of a load cell and, with some calibration, you'll be able to get very accurate weight measurements. This can be handy for creating your own industrial scale, process control or simple presence detection. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.

Product

Clamp Meters

-

Omega Engineering, Inc

Omega Engineering, Inc

Omega Clamp Meters provide True RMS Current and Voltage measurements and also include additional measurements typically found in Multimeters such as AC/DC voltage, current, resistance and others.

Product

Resistance Kits

-

Prostat Corporation

Prostat Corporation

Prostat Resistance Kits

Product

Potentiostat Galvanostat

EchemLab XM

-

Ametek Scientific Instruments

EchemLab XM - Ametek Scientific Instruments

EchemLab XM includes a reference grade potentiostat and frequency response analyzer (FRA). EchemLab XM has a built-in 100 V high voltage amplifier which can be used for not only for compliance measurements but also for high voltage cell polarization. This is useful in many high solution resistance applications, for example in organic electrochemistry. In addition to high voltage, power boosters can also be integrated to combine high current and high voltage in many specialized plating applications.

Product

Earth Resistance Tester

M71

-

HT Italia Srl

M71 - HT Italia Srl

M71 has been developed to measure earth resistance with 2 wires and 3 wires by voltammetric method in compliance with standard IEC/EN61557-1.