Displacement Transducers
-
Product
Pressure Transducer Module
PTM-1000
-
Advanced Thermal Solutions, Inc.
The PTM-1000, Pressure Transducer Module, is a four-channel test instrument for measuring differential pressure in enclosures where air flow integrity is critical to proper performance. As the demand for more energy efficient cooling grows, the need for measuring the pressure at each source of heat generation will follow.
-
Product
Transducers For High-Current Quantities
-
Specialized industrial devices that convert heavy electrical currents and power variables into safe, standardized signals for monitoring and control systems.
-
Product
Coaxial Transducers
-
Concentric point source transducers deliver full frequency range in correct phase alignment, with precise polar pattern and perfect clarity.
-
Product
Modbus Transducers
THI Sensors
-
The THI-485 sensors are Modbus transducers for measuring thesurrounding temperature and relative humidity or for theacquisition of up to four passive pulse signals or digital states. This feature extends the possibilities of the device, turning it into a kind of RS485 pulse concentrator from other sensors andmeters.
-
Product
Computer Conversions GT Transducers
DHM
-
Computer Conversions Corporation
Computer Conversions GT Transducers are brushless, Electromagnetic, Rotary Sensors used to provide Precise Absolute or Incremental Position, and Velocity feedback in harsh environments. All Computer Conversions Transducers are continuous rotation, bi-directional, and electronically passive devices (no electronic componenets to degrade or fail), that require zero maintenance, and may be installed in virtually inaccessible locations.
-
Product
Data Stream Digital Transducers
-
The Data Stream Series provides a digital stream of data that can contain complete electrical properties information including current, voltage, power, phase angle and frequency. Additionally, an energy totalizer can be configured to give total energy calculations. All data is transmitted via an RS485 bus, and a single bus can communicate with multiple devices. MODBUS capable programming is also available.
-
Product
Piezo-ceramic Transducers
-
Ultrasound transducers for diverse applications in medicine and NDT.
-
Product
Digital Displacement Inductive Sensor
EX-V Series
-
High-speed, high-accuracy, digital inductive displacement sensors with sub-micron resolution and an ultra-fast 40,000 samples/sec. sampling rate. Automatic Bottom-dead-center measurement mode. High-speed sampling : 40,000 samples/second. Digital Inductive Displacement Sensor
-
Product
Test and Measurement Grade Vacuum Pressure Transducer
P897V
-
The P897V is designed for a wide variety of pressure measurements where high resistance to vibration and superior stability through temperature change is required. The zero and full-scale output calibrations are set by the potentiometer adjustments accessible from the top cover. The P897V is digitally compensated and corrected to provide high accuracy pressure measurement in a robust cylindrical form factor. Small vacuum pressures are accurately measured with full scale vacuum ranges as low as 2.22 InH2O.
-
Product
Combined Pressure and Temperature Transducers
-
Variohm offer some different styles of combined pressure and temperature transducers including the EPTT5100 which has an internal temperature sensor and the miniature EPTTE1400 which has an external temperature probe.
-
Product
Transducers
-
You will be able in the following page to select the tranducer that better fit your needs, by selecting the ultrasonic frequency and the diameter of the piezo element, the temperature range and the sizes of the case.
-
Product
Linear Motion Tandem Transducer
-
Columbia Research Laboratories
The Columbia Model LMT-50 is a unitized rugged package consisting of tandem linear variable differential transformers (LVDT's) with probe assembly. The LMT-50 is designed so that the likelihood of a single failure affecting both output signals is extremely improbable. The model LMT-50 offers flight proven performance, even in the most severe environments.
-
Product
Combined Pressure and Temperature Transducers
-
We can offer some different styles of Combined Pressure and Temperature Transducers. The EPTT5100 combined pressure and temperature transducer has an internal temperature sensor. The miniature EPTTE1400 combined pressure and temperature transducer has an external temperature probe.
-
Product
Cryogenic Low Noise Magnetic Field Transducer
K3A
-
The SENIS K3A cryogenic low noise magnetic field transducer is engineered to deliver highly accurate measurements of the amplitude and direction of magnetic fields at extreme cryogenic temperatures, extending down to approximately 1 K. This innovative instrument features a compact sensor head boasting dimensions of just 4.5 x 4.5 x 9 mm, integrating a robust 3-axis Hall sensor that guarantees precision in magnetic field readings. Notably, it incorporates the world’s smallest field-sensitive volume, measuring less than 0.6 mm³, making it a premier choice for applications requiring compact and efficient magnetic field measurements.Equipped with cutting-edge electronics, the K3A transducer provides exceptionally low drift and ultra-high resolution in its measurements. The device outputs an analog voltage for each magnetic field direction (Bx, By, Bz), facilitating accurate assessment of magnetic fields. Optional high precision calibrations are available, achieving an impressive accuracy of 0.25% and accommodating magnetic fields up to ±9 T, even at cryogenic temperatures as low as 4 K. This instrument is ideal for researchers and engineers needing reliable and precise magnetic field measurements in challenging environments.
-
-
Product
Clamp-on Transducer
CA1000D
-
Measure current without disconnecting circuit under test. Measure to 1000A DC or AC. Outputs 1mV per Amp, operates on 2V range of any DMM.
-
Product
Digital Instruments and Measuring Transducers
-
Digital instrumentation devices are installed to display an electrical or process variable, for rapid monitoring and management, normally in industrial settings. This information can be used to detect any alarm that may be triggered by a control value, informing in real time of any malfunction in an industrial, machinery or control system process. The data is shown numerically, and is proportional to the measured parameter and can be integrated into SCADA systems, as long as they have integrated communications.
-
Product
Vacuum Pressure Transducers
-
MKS modular vacuum transducers feature compact size that dramatically reduces installation costs. These vacuum/pressure gauges are ideal for applications where controller size and local control are critically important. They are available as pressure transducers with an analog output, or as vacuum modules with digital communications used to transmit the pressure signal.
-
Product
Acoustic Emission Transducer
GT301
-
Acoustic emission transducer GT301 converts acoustic signal into electrical signal, parameters of which are used for acoustic emission source evaluation.
-
Product
PVdF Transducers
-
PVdF transducers have a wide bandwidth, short impulse response and can be designed to your specific requirement.
-
Product
Transducers
-
A device that enables conversion between two different forms of energy thanks to its inherent properties.
-
Product
Test and Measurement Pressure Transducer
P895
-
The P895 is designed for a wide variety of pressure measurements where high resistance to vibration and superior stability through temperature change is required. The zero and full-scale output calibrations are set by the potentiometer adjustments accessible from the top cover.
-
Product
AC Voltage Transducer
TD SERIES: AC
-
Kusam Electrical Industries Limited
• Dual Aux. Power 110/220V AC• High Accuracy 0.2% RO at 23 °C ± 5 °C• High Dielectric Strength 2.6KV AC / Min,Between Input / Output/ Power Case• ABS Plastic Case, DIN Rail or Wall Mounting
-
Product
Transducers, Cables, Couplants & Test Blocks
-
Olympus offers a complete selection of transducers, cables, couplants, calibration test blocks, and accessories to meet a wide variety of ultrasonic precision thickness gaging applications.
-
Product
Miniature Pressure Transducer
EPT1200
-
The EPT1200 series of Pressure transducers has a miniature design using a hermitically welded, thin filmmeasuring cell, coupled with high level output circuitry. This technology ensures this sensor is suitable for some of industries harshest environments, including automotive, industrial hydraulics, refrigeration, off-road, construction and agricultural applications. The EPT1200 and 1500 series offer measurements in gauge and absolute pressure, with ranges up to 400 Bar and are backed by a one-year warranty.Miniature design | Rugged construction | Wide operating temperature range | Long life High performance
-
Product
Displacement and Encoders
-
INCREMENTAL digital Transducers are mainly designed for displacement measurement in machine tools and other industrial applications. The sensors are characterized by high precision and are absolutely dust and waterproof. The used materials permit applications in heavy industrial environments.DISPLACEMENT Transducers are suitable for measurements of small distances up to 50mm. They are characterized by high accuracy and repeatability, reliability and fast response. Digital ENCODERS operate on optical or magnetical principal and are offered with incremental or absolute coded outputs. They are suitable for precision industrial applications.
-
Product
General Performance Differential Pressure Transducers
-
These general performance Baratron® differential capacitance manometers measure the difference in pressure between the inlet tube and the reference cavity. The reference cavity can be connected to any pressure or vacuum source, or be open to local atmosphere.
-
Product
Non-Contact Displacement Meter
-
The principle of the eddy current is applied to measure the distance without contacting an object. This measuring method is widely used in the industry for detecting abnormal vibrations of rotating shafts or ironwork in a production in line. The highly accurate signal conditioning for providing the analog voltage being linearly proportional to displacement can be made easy.
-
Product
Transducer & Isolator
-
Measured parameters can be programmed to generate equivalent output signalsOverride selection for desired value and rangeIsolation between input to output or output to outputQuick response time of 300ms in display and communicationOn field configurable Input and Output parametersUser friendly interface to support remote monitoring and communication
-
Product
Digital Transducer
3MH2
-
The 3MH2 Digital Transducer is a state-of-the-art measurement instrument designed for high-precision applications requiring rigorous measurement standards. Currently under final development and expected to be available for order by Q1 2027, this transducer is capable of measuring three components simultaneously, calculating the total field amplitude and direction with extraordinary accuracy. With a measurement DC accuracy of less than 0.1% (1,000 ppm) and exceptional stability in digital readings, it stands out in demanding environments. Its compact design incorporates a 3D Hall Integrated Circuit in the C Probe Type, allowing for a remarkable spatial resolution of only 0.10 x 0.01 x 0.10 mm³, ensuring detailed data collection with minimal disturbance to the measured field.Equipped with features that enhance operational flexibility, the 3MH2 boasts magnetic DC resolution better than 1 ppm at the ±2T range, and offers up to four selectable magnetic field ranges: 100 mT, 500 mT, 2T, and 20T, calibrated up to 9T. The device excels in a variety of applications, from mapping magnetic fields and characterizing undulator systems to current sensing in laboratory and production line settings. Connectivity is made simple with USB2.0 and LAN support, complemented by a 24-bit A/D converter, allowing for sophisticated data acquisition and triggering capabilities, including internal and external triggers for single shot, manual, and continuous operations.
