Product

Synchro and Resolver Angle Indicator

AIT5

-

Computer Conversions Corporation

AIT5 - Computer Conversions Corporation

This series of units were designed to satisfy Hi speed synchro/resolver applications where the output data must be fresh and no data staleness can be tolerated. The tranducers utilized are the same as in the regular MDS series, however different tracking electronics are used. The resultant data tracks the input shaft perfectly and is always fresh and accurate at input speeds up to 64 revolutions per second, depending on the resolution. Data in BCD or Binary formats are available, and clean, unambiguous crossovers are guaranteed.

Product

Chassis Position Sensors

-

CTS Valpey Corp.

CTS Valpey Corp.

Chassis height sensing is a specific application of CTS' rotary sensor technology. Chassis height sensors measure the position of the control arms relative to the frame or body of the vehicle. This information is used in systems such as headlight leveling and real-time-dampening. Key features of the CTS' chassis height sensors is the ability to mount in a variety of angles and projections to accommodate difficult packaging as well as robust sealing required for under chassis applications. With a global team of application engineers, CTS can package one of our generic, tooled for sales sensors or develop a custom product, unique for your application.

Product

Altitude Indicator and Pressure Transducer

AI100

-

Bemco Inc.

AI100 - Bemco Inc.

Bemcos AI100 Altitude Indicator and Pressure Transducer provides a red, 5-digit scaled LED display of chamber or process Altitude, calibrated in feet or meters as well as a linear, scaled output of 4 to 20 mA, 0 to 5 VDC, or 0 to 10 VDC for use with other instruments including process controllers, recorders, and programmable logic controls.

Product

MR50 THT Vertical | 12 Positions | 1 Pole | 1/4''-28 UNF

MR50-B1/2xA/B

-

ELMA Electronic, Inc.

MR50-B1/2xA/B - ELMA Electronic, Inc.

Highly robust Ø 1/2" selector with 30° indexing angle, up to 6 Ncm switching torque and operating temperature from -45 to 85° C

Product

Non-Contact Type Phase Sequence Indicator

895 PR

-

Standard Electric Works Co., Ltd

895 PR - Standard Electric Works Co., Ltd

Protection class: IP40. Non-contact detector clips. No metal contact points to advocate greater safety. Two functions in one unit : open phase and phase sequence detection. Designed for checking a wider range of 3-phase power sources. LED display lights with buzzer indicator. Brightness button feature for better visibility in dimly lit areas or sunlight. Magnetic mounting feature.

Product

26-Pin D-Type Male Right Angled PCB

40-963-026-RM

-

Pickering Interfaces Inc.

40-963-026-RM - Pickering Interfaces Inc.

Accessory allows a user to create their own PCB based termination solution mounted directly on the front of the product or on the end of a cable. Interfacing PCBs should be designed with suitable clearances for the voltage the application requires.

Product

12V Circuit Tester With LED Polarity Indicator

1658

-

Peaceful Thriving Enterprise Co Ltd

1658 - Peaceful Thriving Enterprise Co Ltd

Checks open or short circuits on 12V automotive computer circuits and all primary automotive electrical circuits. Safely tests standard primary automotive circuits and on-board computer controlled electrical system without damaging the micro-processor.

Product

04 With Soldering Eyelets | 4 Wafers | 12 Positions

04-4xx4-00/30-xx

-

ELMA Electronic, Inc.

04-4xx4-00/30-xx - ELMA Electronic, Inc.

Very robust, multi wafer selector with 30° detent angle, switching torque up to 20 Ncm and a rotational life up to 25'000 cycles

Product

Positional Current Probe, PCB Track Touch And Measure

I-prober 520

-

Aim-TTi

I-prober 520 - Aim-TTi

Current measurement from insulated probing of conductorSuitable for observation and measurement of current in PCB tracks, component leads and ground planesWide dynamic range of 10mA to 20A peak to peakWide bandwidth of DC to 5MHzLow noise figure equivalent to <6mA rms at full B/WSafety rated to 300V Cat II (600V Cat 1)Suitable for connection to any oscilloscopeHigh accuracy general purpose H-field probeConverts to 'closed magnetic circuit' current probe

Product

Tilt Position Sensors

-

Positek Limited

Positek Limited

Available with any measurement angle between 15 and 160 the P603 tilt sensor operates a gravity driven, oil damped pendulum with a very low settle time and durable housing. Our tilt sensor has proved popular in marine applications because like our linear and rotary sensors we have used highly durable and corrosion resistant materials.We also offer the S623 which is waterproof sealed for continual submersion to IP68 350bar, 5000psi, 3500msw

Product

01 With Soldering Eyelets | 10 Positions | M8

01-1xxx-00/30xx-10-0

-

ELMA Electronic, Inc.

01-1xxx-00/30xx-10-0 - ELMA Electronic, Inc.

Multi wafer compact selector with 36° detent angle, 4 mm shaft diameter, 25'000 switching cycles and with up to 6 Ncm switching torque

Product

24" Support Angles

SA-24

-

ELMA Electronic, Inc.

SA-24 - ELMA Electronic, Inc.

24" support angles provide 3” of horizontal surface along each side of vertical cabinet for supporting instruments.

Product

Linear Testfixture for VPC iCon i1 Mass Interconnected Cassette Interface (Cassette Not Included) 4 or 10 Positions Blocks, UTT 306 x 248 mm

MG-02-01

-

MG Products

MG-02-01 - MG Products

FEATURES• Linear click system with ball bearings, using gas springs• 10 mm ESD-proof top cover with aluminium reinforcement bars• Steel base cabinet with detachable aluminium back and bottom panels• Detachable interchangeable case system with an 8 mm spring loaded probe protection cover• Base cabinet fitted with a telescopic guide rail and catchTECHNICAL SPECIFICATIONS• Max. number of probes (2000N) 1300 units• Max. PCB height: 60 mm• Linear travel: 12 mm• Max UUT: 306 x 248 mm (wxd)• Outer dimensions: 470 x 490 x 100 x 170 mm (wxdxh1xh2)• Designed for Mass interconnect changeable cassette• Up to a maximum of 4 interface blocks of 160 signals• All interface blocks can be customized

Product

Digital Indicator

ZET 7178

-

ZETLAB Company

ZET 7178 - ZETLAB Company

The Digital indicator ZET 7178 is intended for indicating the data transmitted via the CAN network by the ZETSENSOR series digital sensors.

Product

Phase Sequence Indicators (Contact Type)

855 PR

-

Standard Electric Works Co., Ltd

855 PR - Standard Electric Works Co., Ltd

● Two functions in one unit: open phase and phase sequence detection.● Lamps let you determine at-a-glance if phase is open.● Large size alligator clips for easy clipping onto switch-boards terminals.● Checks a wide range of 3-phase power sources.● Special test leads length are available on request.● Push button switch is designed to minimize damage due to negligence.

Product

Phase Sequence Indicators (Contact Type)

ST-850

-

Standard Electric Works Co., Ltd

ST-850 - Standard Electric Works Co., Ltd

● Two functions in one unit: open phase and phase sequence detection.● Lamps let you determine at-a-glance if phase is open.● Large size alligator clips for easy clipping onto switch-boards terminals.● Checks a wide range of 3-phase power sources.● Special test leads length are available on request.● Push button switch is designed to minimize damage due to negligence.

Product

Angle Measurement Devices for Vehicles

ANGLE MEASUREMENT IN VEHICLES

-

F. W. Breithaupt & Sohn GmbH & Co.KG

ANGLE MEASUREMENT IN VEHICLES - F. W. Breithaupt & Sohn GmbH & Co.KG

*Development, manufacture according to customer inquiries*Many decades experience in project managment and solutions for special vehicle devices*Mechanical and mechatronical solutions*Made in Germany

Product

Spring Loaded LVDT Position Sensors

-

NewTek Sensor Solutions

NewTek Sensor Solutions

Gage head LVDTs are ideal for industrial environments requiring a reliable and rugged sensor.  With near infinite resolution and excellent repeatability, these spring-loaded LVDTs are ideal for quality testing and gaging with several customization options available.