-
Product
Calibrators
-
Orbit Controls calibrators are suitable as signal sources for test benches or laboratories. They can be used as generators for calibrating and testing electronic measuring devices or assemblies, both by manufacturers and by companies that must perform periodic calibration tasks for quality certification.
-
Product
ELT Testers
BT200 Series
-
Building on the features of the industry standard BT100, the BT200 offers improved measurement capabilities and in a fully integrated and ruggedized device. The BT200 meets and exceeds the measurement requirements for EPIRBs (IMO MSC/Circ.1039 and 1040) and for ELTs in the USA (FAA Part 91.207), in Canada (CAR 571 Appendix G), and Europe (CAA/EuroCAE requirements). These Beacon Testers in fact form a cost effective solution by eliminating the need for other costly test equipment. Don’t risk incomplete testing of your beacons – use the BT200 to test them thoroughly. In compliance with your Quality Assurance requirements, detailed calibration data is included with each Certificate of Calibration.
-
Product
NI-9246, 50 kS/s/ch, 20 Arms, 30 Apk, 24-Bit, 3-Channel C Series Current Input Module
783920-01
Current Input Module
50 kS/s/ch, 20 Arms, 30 Apk, 24-Bit, 3-Channel C Series Current Input Module - The NI‑9246 is designed to support direct ring lug connectivity to the three-phase high-current measurements of 1 A and 5 A current transformers (CTs). It is optimized for power, energy, and industrial applications. The safety features, certifications, input ranges, overvoltage ranges, and connectivity are well suited for applications such as power quality monitoring and metering, utility pole-mounted smart switches, utility pole-mounted smart grid reclosers, substation merging units, industrial machine measurements, health monitoring, predictive maintenance and prognostics, and phasor measurement units (PMUs).
-
Product
Temperature Sensors
-
Robust temperature transducerWith integrated Pt1000 sensorOutput signal 0-10VTemperature range -30 to 80 CPower supply 15-30Vdc / 24VacSupplied with calibration certificate
-
Product
Igniter Testers
-
Igniter Tester is a failsafe and portable digital ohmmeter specifically designed for ultra-safe resistance testing on squibs, flares, bridge-wire, and other explosive devices. The 620A-4 ohmmeter has been approved by the USAF Non-Nuclear Munitions Safety Board for usage on all non-nuclear munitions, and independently certified to meet Mil. Std. 810 Mtd. 511 for usage in fuel-filled environments. Due to its intense self-safety design and numerous certifications, the 620A-4 failsafe ohmmeter is the industry standard for military programs in need of igniter testing.
-
Product
Calibration Software
-
AMETEK Sensors, Test & Calibration
Our calibration software provides an easy way to calibrate gauges, RTD´s, thermocouples, transmitters, thermoswithes, and pressure switches. Complete a full calibration from entering the details of the gauge to printing out a calibration certificate. Reduce operating time by automating calibration procedures, reduce sources of error by automatically reading and storing values from the reference, and customize certificate templates to fit your needs.
-
Product
Field Evaluation And Special Inspections
-
Nemko offers Field Evaluation and Special Inspection Services in the US and Canada as a fast and economical alternative to traditional product safety certification.
-
Product
Premium-Level Wi-Fi 7 Key E Solution Based On WCN7851
AIW-173BQ
Industrial Wireless Module
Industrial-grade temperature range (-40~85°C)Compatible with different platforms(NXP, Qualcomm, Intel & AMD)MLO(Multi-Link Operation) supportMultiple certification(FCC/CE/IC/TELEC/NCC/RCM)
-
Product
Industrial Panel PCs and Monitors
Panel PC
Advantech provides HMI and monitors with C1D2 certification. Apply to asset monitor and data process in harsh environments like O&G or pharmaceutical.
-
Product
EMI Measurement Application
Fsx-k54
-
The EMI precompliance application (K54 option) for Rohde & Schwarz signal and spectrum analyzers is the ideal extension for EMI analysis during product development and to prepare for a smooth product certification process. Typical fields of application include commercial, automotive, avionic and military product developments (CISPR, EN, FCC, DO-160 and MIL-STD-461 standards).
-
Product
Mechatronics
-
MERA performs design, construction, supply, installation and certification of stands for various testing types:● static loading● dynamic and life-cycle● transporting testing (vibration table)● thermal testing● centrifuges● modeling of take-off, landing modes, etc.
-
Product
Systems
System
In addition to our ISO 9001:2008 certification, we are proud to have the highest possible score for delivery-on-time and QA rating - 100% - from all the major aerospace companies.
-
Product
Torque Metering System
Model TMS2200
-
Full capability of standard RDT2100 model with the addition of a Class I Division II certification of the system.
-
Product
Embedded Software
-
Ansys embedded software development solutions align the design process according to safety standard objectives, reduce development costs, and accelerate time to certification by a factor of two.
-
Product
350W to 1150W - Single Output / Multiple Output
NV MODULAR Series
-
*Up to 8 Outputs (6 for the NV350)*1U Form Factor*Up to 90% Efficient*Active Power Factor Correction*Universal Input (90 - 264VAC)*No Minimum Loads*Medical Certifications
-
Product
TRMS System Multimeter for Use in Medical and Hygienic Sensible Ranges
SECULIFE HIT MD
-
TRMS multimeter that has been designed especially for all hygienically sensitive areas. 23 multimeter functions. Voltage measurement.Auto-ranging current measurement from 100A (resolution: 10nA) to 10A (16A). Capacitance and resistance measurement, diode and continuity testing. Measuring categories: 600V CAT III and 300V CAT IV. Hygiene certificate from University of Marburg
-
Product
Certified RTOS
LynxOS-178
-
The software industry is concerned with safety and is facing big challenges to make the process of certification (to any standard) more repeatable, more efficient, and more cost effective. The general software industry has been working on software re-use and modularity for many years but these concepts only touched the surface of the DO-178B industry.The LynxOS®-178 RTOS is the first and only hard real-time DO-178B level A operating system to offer the interoperability benefits of POSIX® with support for the ARINC 653 APplication EXecutive (APEX).
-
Product
Generator/Analyzer for NFC/EMVCo Manufacturing Test
Micropross MP500 PT1-NFC
test
Support for ISO 14443 A/B, ISO 15693, MIFARE™, FeliCa™. Measurement correlation with NFC Forum and EMVCo certification test bench. Automated test executive with ready-to-run test sequences. Reader/Writer and Card Emulation modes, resonance frequency measurements supported on same antenna. Embedded analog measurements - LMA, field strength, S11, Q factor, waveform characteristics. Physical parameter/waveshape characteristic definition
-
Product
5G | OTA | Bluetooth | PTCRB Testing Services
-
Eurofins E&E Wireless Device Over-the-Air (OTA), 5G Performance, Bluetooth, PTCRB, and Global Certification Forum Testing.
-
Product
Timers
-
We offer high-precision timers with a wide range of housings and environmental certifications.
-
Product
UL & CSA
-
If you are selling your product in the US and Canada, you need to comply with the applicable nationally accepted UL & CSA (and possibly other) standards. F2 Labs can evaluate and test your product, help you through the certification process and enable you to get your US and Canadian certifications to the UL and CSA standards.
-
Product
CB Scheme
-
The CB scheme is an international program promoting global harmonisation and the reduction of trade barriers. Originally implemented to coordinate the acceptance of product safety test results among laboratories and certification organisations worldwide, the CB scheme provides manufacturers multiple national safety certifications for their products with a single CB certificate.The CB scheme actually consists of one single audit and certification procedure to demonstrate the safety of your electrical products to the world's most important markets. Our experts can audit your goods and support you during international product homologation. The advantage of obtaining the CB certificate, the supplemental CB report and further country-specific documents is easier access to acquiring mandated national audit seals.
-
Product
FCC/CE Certification Testing
-
FCC/CE Certification Testing services to ensure that our product designs meets the necessary FCC/CE/UL norms. FCC compliance testing is mandatory for a wide variety of products designed for the EU/US markets.
-
Product
Cable Certifiers
LANTEK III Series
-
New permanent link adapter saves money. Send test data anywhere using IDEAL AnyWARE app. Certifies multimode and single-mode fibre (optional). Professional PDF reports with free software. Certifies twisted pair cabling to TIA/ISO standards. The LanTEK III is an easy to use cable certifier that meets existing TIA and ISO/IEC performance requirements for testing up to Cat 7A/1000MHz. FiberTEK III adapters are used with LanTEK III for fast and simple certification of high bandwidth single-mode and multimode fiber optic cabling including support for encircled flux testing.
-
Product
Low Pressure Drop Thermal Mass Flow Meter
HFM-200 LFE
-
The HFM-200 LFE Series by Teledyne Hastings can be configured and accurately measure gas flow in a broad array of applications. Featuring reliability and stability, the 200 Series is chosen by users for its very stable performance with varying ambient conditions. A wide choice of elastomer seals make this flow meter compatible with most gases.The HFM-200 LFE meter has flow ranges from 0-10 sccm to flows of 0-15,000 slm; provides analog outputs, and is constructed of stainless steel. The full scale range is specified by the end user. A NIST traceable calibration certificate is standard. Cleaning for oxygen service is available. Our laminar flow elements (smooth, threaded or flanged) are available in various sizes from 3/8" up to 8". Low pressure drops at full scale flow.
-
Product
Eight-channel USB Voltage and Thermocouple DAQ
Model DI-2008
-
Includes DI-2008 instrument, WinDaq software, calibration certificate, terminal screwdriver, and USB cable (6-feet). Eight differential and isolated analog input channels. Seven bi-directional digital input ports, including: Counter input for totalizing applications, Rate input for frequency/flow/rpm applications. ChannelStretch™ channel expansion to 128 analog and 112 digital channels. Programmable voltage and thermocouple measurements per channel. 10 mV to 50 V programmable range per channel in 12 steps.
-
Product
Current Probes
-
Tektronix current probe solutions offer:*The broadest range of AC/DC and AC-only current probes*Measurement accuracy from uAs to 2000 A*Best-in-class bandwidth up to 120 MHz*Best-in-class current clamp sensitivity down to 1 mA*The only products with 3rd Party Safety Certification (UL, CSA, ETL)*The only products with bare wire voltage ratings*Automatic readout and scaling when used with Tektronix oscilloscopes so you don’t have to convert volts to amps or manually set the scaling
-
Product
Premium-Level Wi-Fi 6E M.2 Key E Solution Based On WCN6856/QCA2066
AIW-170BQ-001
Industrial Wireless Module
Industrial-grade temperature range (-40~85°C)Compatible with Nvidia and NXP platformsAdditional 6GHz supportDBDC(Dual band dual concurrent) supportMultiple certificates (FCC/CE/IC/TELEC/KC/NCC)
-
Product
Aerospace System Development
-
For more than ten years, TechSAT provides to its customers research and development services for safety critical systems, primarily in electron-mechanical and avionics domains. At System Level we offer ARP4754A and ARP4761 compliant development including System Specification, Safety Assessment, System Architecture Design, Model based Validation, System Integration and Verification as well as certification support for Part 23 and Part 25 programs.At Equipment Level TechSAT offers customer specific LRU development including all elements of the development life cycle from conceptual design, through formal requirement based engineering, hardware and software development compliant to DO254, DO178, verification and validation including DO160 environmental qualification up to a DAL A certifiable product.
-
Product
18.5" FHD TFT LED LCD Touch Panel Computer With 13th Gen Intel® Core™ Processors And ATEX Explosion-Protected Certification
SPC-618WE
-
Industrial-grade 18.5" FHD TFT LCD with 50K lifetime and LED backlightIntel® Core™ Processors (13th Gen ), i7-1365URE deca-coreBuilt in single DDR5 4800 RAM with 32GB capacityBuilt in sTLC SSD of 256GB with extreme longevity and reliabilityCompact, fanless embedded system with aluminum alloy front bezel and chassis grounding protectionSpecialized enhanced impact proof touchscreen with PCAP touch control and IP65-rated front panelDiverse system including Type C connector with USB 3.2, DP 1.4a, 15W power deliverySupport TPM2.0 hardware securityIEC Ex & ATEX certification for Zone 2/22 criteria and Class I Division II explosion proof certification
