Readers
-
Product
RFID Readers
-
Immense growth of ecommerce continues to fuel demands for end-to-end product traceability, visibility, sustainability, and reduced friction operations in most industries. Radio-frequency identification (RFID) technology offers data in real time and is used to facilitate most tracking operations while reducing human error.
-
Product
Electronic Dosimeters & Readers
-
Readers operate using software packages installed on computer (PC) and communicate with DMC 3000 dosimeter and DMC 2000 and SOR families in hands-free data exchange mode. the LDM 320 reader is used as an interface to activate a dosimeter (to switch into counting mode) or to deactivate it (to switch into pause mode). When used with the included* DMCUser software, it functions as an interface to read and write the internal data of the DMC 3000, SOR and DMC 2000 dosimeters.
-
Product
VITC Readers & Generators
-
Analog composite video and generates standard SMPTE VITC time code and inserts it into the first few lines of active video rather than into the vertical interval where normal VITC is located. This allows the VITC time code to be recorded on various digital video recorders that record the picture content but do not record the actual vertical interval portion of the video signal and in this way allows you to use these digital video recorders to record high quality video and VITC time code.
-
Product
Stationary 1D / 2D Code Readers
-
Leuze electronic GmbH + Co. KG
Camera-based bar code readers for stationary use: These code readers reliably capture 1D- and 2D-codes; depending on the type, printed or directly marked, omnidirectional, static or in fast motion as well as inverse or mirrored codes. Various version are available with respect to size, robustness, protection classes IP 67 or 69K, speed or high-end functions.
-
Product
Fixed-Mount Barcode Readers
DataMan 280 Series
-
DataMan 280 series fixed-mount barcode readers offer fast decoding, easy setup, and valuable Industry 4.0 features, like web browser connectivity and performance monitoring, in a small form factor. DataMan 280 was engineered to better track and trace items throughout manufacturing and logistics supply chains solving a broad range of tough 1D, 2D, and direct part mark (DPM) code applications.
-
Product
Image-Based Code Readers
-
Image-based code readers combine performance and flexibility. In demanding applications, they read a variety of code types such as 1D or 2D codes, DPM codes and miniature codes. The cameras also identify colored and damaged codes, regardless of the marking method and surface. This ensures very good read rates, even at high speeds and with changing rotational positions of the codes.
-
Product
Fixed-Mount Barcode Readers
DATAMAN 470 SERIES
-
DataMan 470 series fixed-mount barcode readers solve complex, high-throughput manufacturing and logistics applications with ease. DataMan 470's multi-core processing power, imaging technology, high-resolution sensor, advanced decoding algorithms, and simple setup delivers maximum coverage, speed, and ease-of-use.
-
Product
2D Imager Readers
-
Datalogic’s family of 2D Imager Readers will transform your traceability capabilities in all logistics, intralogistics and shop-floor stationary industrial scanners applications. They bring industry-leading performance, flexibility, and a low total cost of ownership to machine builders and end users, and effortlessly read the most challenging printed labels and directly marked parts.
-
Product
Laser Markers / 2D Code Readers
-
Panasonic Industrial Devices Sales Company of America
Panasonic Laser Markers are ideal for the high speed, non-contact, permanent labeling of metals, plastics, resins, glass and natural materials such as paper, wood or leather. Panasonic's Laser Markers make no contact with the target object and have no moving parts or consumables - a strong advantage over methods like stamping or engraving.
-
Product
RFID Reader
UTC-100P-R
Card Reader
Frequency: 13.56 MHz. RFID R/W Mode: Supports Mifare Ultralight. NFC Card Mode: Simulates ISO14443A/B mode. OS Support: Windows 10 & Android.
-
Product
HEAVY-DUTY CODE READER
MDBSCHD240
-
*Color display*Rugged enclosure for durability*Global OBDII quick test*Gasoline and diesel engine coverage*Read and clear diagnostic trouble codes*On-screen text in Spanish, French and English*On-screen definitions of diagnostic trouble codes*Set measurement units in SAE English/Metric*Internet upgradeable
-
Product
IRIG Time Code Receiver for Computers (PCI Express)
TCR180PEX-EL
-
Meinberg Funkuhren GmbH & Co. KG
The TCR180PEX-EL receives IRIG-A/B/G, IEEE 1344, IEEE C37.118 or AFNOR NF S87-500 time codes and can be used for synchronizing the system time of its host PC. The IRIG output of this card can generate an IRIG signal for other IRIG time code readers. It is used in applications like data acquisition, standalone computer time synchronization (for systems without a network connection or higher accuracy requirements).
-
Product
Internet-Wide, Real-Time Data Sharing via the Cloud and the Network's Edge
Vortex Link
-
Vortex Link provides universally accessible Routing and Discovery Services that enable ubiquitous and transparent data sharing and WAN connectivity for Vortex DDS systems or any other system/device that uses a compliant Data Distribution Service (DDS) software stack. Vortex Link provides transparent discovery and routing between data readers and data writers regardless of location. Vortex Link supports a number of different deployment and connectivity scenarios, including individual device to cloud, system to cloud and also connecting your different LAN’s to turn them into a single system.
-
Product
1D/2D Barcode Reader
UTC-510P-B
-
1D/2D:752x480 CMOS2D Barcode Decoder Chip 72MHzRed LED 625±10 nm. 1D Linear:20% minimum reflective differenceTypical 3 mil (Code 39, PCS 0.9)Up to 24 inches on 100% UPC/EAN symbolsUp to 31.5 inches on 20 mil Code 39630nm visible red LED.
-
Product
Smartcard Interfaces
-
ST offers complete analog interfaces for asynchronous 1.8 V, 3 V and 5 V smartcards. They can be placed between the card and the microcontroller with only a few external components to perform all supply protection and control functions. Main targeted applications are smartcard readers for set-top boxes, IC card readers for banking, identification and pay TV.
-
Product
Immunochromato-Readers
-
The C10066-10 Immunochromato-Reader makes rapid, high sensitivity, quantitative measurements of color intensities for red/blue-based immunochromatographic reagents. Since measurement data is saved as a CSV file, it can be analyzed on commercially available spreadsheet software, and calibration curve and time-course graphs then easily drawn. The C10066-10 Immunochromato-Reader is an optimal tool for R&D work as well as quality control of immunochromatography reagent kits.
-
Product
Connectivity
-
Complete range of connection boxes, controllers and accessories for reader network building and flexible connection to all industrial fieldbus
-
Product
Dual Channel Bit Synchronizer for Rates up to 45 Mbps
LS-45-DB
-
The Lumistar LS-45-DB Dual Channel Bit Synchronizer Daughterboard provides optimal reconstruction of a serial PCM data stream that has been corrupted by noise, phase jitter, amplitude modulation, or base line variations. The all-digitaldesign assures a high performance, consistent product, with excellent reliability and long-term stability. Dual channel design can feed each channel of the LS-55-DD dual decom. The LS-45-DB also has a post D combiner that allows for optimal ratiocombining of the two input signals A unique Built-in-Test feature allows performance verification for the Bit Synchronizer to ensure the highest level of operation. Auto-test BIT is performed for a short duration on the application of power and tests more than 90% of the Bit Synchronizer components. This test verifies that power is properly applied, verifies that there are no internal bit errors, and performs other tests to ensure that the bit synchronizer is fully operational with status indication of results. Command-test BIT performs the same functions and can be initiated by the user at any time through the Lumistar software when used on Lumistar PC products. The user has the ability to generate internal pseudo-random patterns and calculate internal bit error rates with or without the injection of forced errors.Various status indicators are also available through the software. The Bit Synchronizer also contains a BER reader as well as frame sync pattern indicator.
-
Product
Mobile I/O Expander & Keypad Controller
-
Analog Devices' family of mobile I/O expanders are ideal for smartphone designs and portable devices that require a large extended keypad and/or expanded I/Os such as inventory scanners, medical equipment, and meter readers. Microprocessors in portable systems are GPIO constrained due to the number of functions they must interface with and control. They are also power hungry, making them inefficient for debouncing, polling, and key press scanning algorithms. ADI’s family of mobile I/O expanders offloads key scan and GPIO functions from the CPU, freeing up the processor for higher priority functions while saving energy.
-
Product
SSI to USB Code Reader
SSI2USB
-
Plant Control and Automation Pty Ltd
SSI to USB Code Reader
-
Product
1D/2D Hand-Held Scanners
-
Leuze electronic GmbH + Co. KG
Mobile bar code readers can read all common bar codes and 2D-codes at various positions in warehousing and logistics omnidirectionally. Depending on the area of application, versions with cable-connected interface for RS 232 or USB interface as well as wireless scanners with Bluetooth interface are available. Configuration can be performed using configuration codes or software.
-
Product
Automated Mask Aligner with Integrated Mask Changer
Model 6000A-MC
-
The Model 6000A-MC is a precision system combining OAI’s Model 6000, Automated Production Mask Aligner, with an integrated mask changer. The mask changer can handle from 10 to 150 masks. Ideal for both semiconductor and bio-tech applications. It also is designed with a bar code reader to assure each mask is coordinated to the right process. Please contact OAI for further product information.
-
Product
Wireless Pulse Input Transmitter Module
T24-PA
-
The T24-PA transmitter module collects and processes pulse related measurements, such as speed of rotation, proximity, flow and count, forming part of the T24 modular telemetry system. The data transmitted by the T24-PA can be received by multiple T24 receivers that include displays, handheld readers, analogue outputs, relay modules and computer interfaces.
-
Product
2D Code Reader
LP-ABR10
-
Panasonic Industrial Devices Sales Company of America
Code Reading, together with Laser Marking, is widely used to enhance production management and traceability. This is possible because the Code Readers from Panasonic are able to read 2D codes marked directly on products.Now users can combine a Panasonic Laser Marker with the new sensitive 2D Code Reader LP-ABR10 for higher-quality management.
-
Product
Smart Card Reader
UTC-510P-S01E
-
Memory card -Synchronous 2-line, 3-line and I2C interface. CPU card -Complies with ISO7816-1,2,3,T=1 and T=0 protocol. Reliability: 200,000 cycles.
-
Product
UV & WH Meter
Apollo 3.0
-
Radiometer/photometer measuring UV and visible light via a single wireless sensor. Available as a single kit (1 Reader and 1 Sensor) or double kit (1 Reader and 2 Sensors). Each sensor measures both UV and White Light.
-
Product
Magnetic Stripe Card Reader
UTC-P02-A2E
-
RS232 optional. USB connection to UTC. Head life 1,000,000 times. Reading speed: 1-60ips. Card standard: ANSI, ISO, ABA.
-
Product
2nd Generation PCIe Multi-function Decommutator
LS-50-E
-
The Lumistar LS-50-E PCIe Multi-function PCM Decommutator offers a PCM decom, PCM simulator, time code reader/generator, and optional bit synchronizer in a single short PCIe card slot. The multi-function decom and simulator is implemented in FPGA using a next generation design based on the LS-50-P. The simulator, decommutator, time code reader and time code generator are achieved on the main board and the bit synchronizer is achieved through an optional low-profiledaughterboard. CVSD voice decoding, h.261 videodecoding, and IRIG Chapter 8 decoding are achievedthrough software.
-
Product
Midi Time Code Reader
MTC
-
MTC - Midi Time Code hardware Analyzer or Analyser /Reader/Decoder. The MTC Decodes any (FX) System Common or System Real-Time Messages and displays them in a clock format, independent from your MTC generating device. The MTC has the same input and HOLD and SCROLL features as described in the MA1 module.
-
Product
RF Test Benches
-
FIME laboratory equipment qualified for RF testingValidate the analogue behaviour of RF devices with a single set of laboratory tools and services before seeking contactless Level 1 type approval or launching mass production. FIME RF test benches are built for RF testing of: EMV contactless cards and readers; ICAO e-passports and readers; ISO devices (PICC and PCD), HF and UHF RFID tags and readers.
