Engineering Services
See Also: Services, Calibration Services, Consulting
-
Product
Engine Simulator
MS 1118
-
Test Set-A calibration unit is a test jig is used to simulate parameters of Adour 804E and 811 engines of Jaguar aircrafts. It simulates current, voltage, speed, and turbine gas temperature. It performs NL Check, NH Check, TGT1 (Non T2 Compensated), TGT2 (T2 Compensated), Amp (Non T2 Compensated), Amp (T2 Compensated), Solenoid Volt, TGT Inject, NL Inject, and NL/TGT Redatum.
-
Product
Services
-
GrayStone Automation's engineering group is well experienced in working with our customers to develop automation, wireless and embedded control solutions to meet the demands of complex applications.Our engineers are equipped with the latest in state-of-the-art design, development tools and equipment to produce the analysis, drawings, software/firmware, and documentation required to take your ideas from concept to completion.
-
Product
Engine Dynamometer
DH23
-
Power: 805 hp (615 kW)Torque: 1,275 lb-ft (1,729 Nm)Speed: 4,500 rpmWater Use*: 60 gpm (227.1 lpm)Inertia Value: 11.4 lb·ft2 (0.48 kg·m2)Shipping Weight: 475 lb (215 kg)*No Cooling System
-
Product
Calibration Services
-
Trescal US is accredited to ISO/IEC 17025, ANSI/NCSL Z450-1 and ANSI/NCSL Z540.3 through A2LA. Trescal has one of the largest scopes of accreditation in the country for electronic, physical and dimensional domains as well as being a factory-authorized service center for many International manufacturers.
-
Product
Services
-
Our teams are dedicated to delivering total support for mission success. We offer the full spectrum of support, from engineering services to information management to commercial, financial, and human resource services, which we tailor to meet the individual requirements of each customer.
-
Product
Test Services
-
Our services cover all aspects of test, from test plan generation; to hardware and software development; to validation, correlation, ramp and production. Our experts have deep experience in digital, memory, mixed-signal and RF applications. We also specialize in secured applications that require personalization/root of trust during backend production.
-
Product
Diesel Engine Tachometer
GE-1400
-
Handheld type digital engine tachometer to be designed for dedicated r/min measurement of 4-cycle diesel engines. R/min direct reading measurement is available only by clamping a CP-044 Diesel Engine Rotation Sensor (sold separately) to a fuel injection pipe.Both analog (switchable between analog and monitor output) and pulse outputs are provided; enabling to use analog output for data recording (monitor output for sensor waveform checking or analysis input signal of FFT analyzer), and to use pulse output for tracking analysis signal of FFT analyzer.
-
Product
Engineering Support Platform
ESP
-
ESP, or Engineering Support Platform, is a low cost, powerful and versatile platform for the development, deployment and support of FPGA Applications. ESP is powered by DSX core, ARC’s core element for the development and deployment of digital and mixed signal systems. The standard system contains 2 custom FPGA system, often configured in combination where one acts as the application firmware, and the other is used for test. But the system is expandable and configurable in any combination to solve any problem in a digital, analog or mixed signal system. The FPGAs can be configured to generate, analyze, process and/or output complex signals at a wide range of voltages, frequencies and serial protocols. It has been used to develop solutions for Radar systems, testers, Pattern Generation, digital signal processing and generating, Video processing, and many more. ESP comes as a desktop or rack mounted solution, and no special interfaces are needed.
-
Product
Engine Dynamometer
H3606
-
Power: 2,000 hp (1,491 kW)Torque: 23,873 lb-ft (32,367 Nm)Speed: 2,550 rpmWater Use*: 146 gpm (552.7 lpm)Inertia Value**: 311.4 lb·ft2 (13.12 kg·m2)Shipping Weight: 3,339 lb (1,515 kg)*No Cooling System**With Companion Flange
-
Product
Service and Support
-
SICK LifeTime Services is a comprehensive set of high-quality services provided to support the entire life cycle of products and applications from plant walk-through to upgrades. These services increase the safety of people, boost the productivity of machines and serve as the basis for our customers’ sustainable business success.
-
Product
Engine Vibration Measurement Unit
MS 1101
-
Used to check engine vibration level. The seismic transducer mounted on both engines. Used for the measurement of vibration levels for various engine rpm. Used for the measurement of amplitude on each frequency component
-
Product
Engine Dynamometer
DS4012-HS
-
Power: 4,250 hp (3,169 kW)Torque: 14,250 lb-ft (19,320 Nm)Speed: 4,000 rpmWater Use*: 309 gpm (1,169.7 lpm)Inertia Value**: 350 lb·ft2 (14.7 kg·m2)Shipping Weight: 5,500 lb (2,495 kg)Rotation: bi-directional*No Cooling System** With Companion Flange or Torsional Coupling
-
Product
Usability Testing Services
-
Usability is a crucial area to find out a product’s acceptance in the marketplace. Poor user experience can affect your customer loyalty, putting a straight impact on your brand reputation.ImpactQA guarantees delivery of a Product with Implied Usability Heuristics which results in Enhanced User experience. This ensures that the live user has all the comfort available in using the application.This kind of testing comprises testing User Interfaces (UI) and User Experience (UX).
-
Product
Engine Torque Pulse Simulation
ETPS
-
HORIBA has revolutionized the way vehicle manufacturers test their Powertrains and Front End Accessory Devices. The ETPS dynamometer system accurately produces torsional pulse characteristics of an engine. This new technology employs a sophisticated mathematical model to calculate the resulting torque at the output of the engine based on engine and combustion process parameters.
-
Product
Design Services
-
Pole/Zero’s motivated staff of program managers and design engineers stands ready to provide custom solutions to meet your specific needs.
-
Product
Test Solutions Services
-
Spinnaker Contract Manufacturing, Inc.
As standard practice, all of our SMT assemblies are washed and tested through our Automated Optical Inspection and pass through our stringent internal QA/QC policies. In Cables and Wire Harnesses, pretests, such as pull tests and crimp type tests, are performed on all builds before being tested for continuity, hi-pot, shorts and mis-wires, to name a few. Our electromechanical assemblies are capable of receiving full functional testing through custom test fixtures and RF test. Some RF tests include Gain/Loss, Frequency Response, VSWR (Voltage Standing Wave Ratio), Inter-Modulation Distortion and Output Power.
-
Product
MEDTEQ Testing Services
-
The MEDTEQ facility has a medium range of test equipment as detailed below for testing to various standards. MEDTEQ reports have the equivalent status of a manufacturer's report, which is acceptable under medical device regulations for many regions, such as US, Europe, Canada and Australia. The reports contain a cover page, general description, sample identification (including photos), clause list (core evaluation), and test data. Unlike CB scheme reports, the test data section is a self contained record for all items inspected, measured or tested, with full details such as test engineer, sample identification, testing dates, environment, test equipment and methods used. This detail provides confidence for regulatory auditors.
-
Product
Reliability Testing Services
-
Innovative Circuits Engineering, inc
Our Reliability Testing Services make it possible for us to work with many different customers who manufacture devices that need tests such as pressure pot, temp cycle and more.The focus of our reliability testing lab is to provide our customers with an array of services and tests that fulfill all of their reliability testing needs. Whether you need preconditioning, thermal shock, pressure pot, or many other reliability testing needs, we are happy to be of service.
-
Product
ESD Testing Service
-
Innovative Circuits Engineering, inc
ICE’s ESD Testing lab has state-of-the-art equipment and in–house technical expertise to perform a whole range of ESD/Latch-up and associated testing services.
-
Product
Engine Based/Burner Hot Vibration
-
Does your company need to test exhaust joints in real world applications?Trialon’s hot vibration test cell can validate any exhaust joint and interface connection past the manifold.
-
-
Product
Test Services
-
From Test Consultancy for new projects, to fixture program development, Terotest offer their experience and support to help you every step of the way. Terotest also offer a range of services to the existing ATE User including calibration and System Service options.
-
Product
BIM Consulting Services
-
Being Revit BIM outsourcing company, our consultants facilitate 3D Modeling (Architectural, Structural, and MEP), 4D BIM Construction Scheduling, 5D Cost Estimation, Clash Coordination, Scan/PDF/CAD to BIM Conversion, Shop drawing, Construction Documentation . Tejjy Integrated project delivery with Autodesk Revit software for Architecture, Structure, MEP workflow allows smooth execution through a quality assured BIM Management lifecycle.
-
Product
Chemical Testing Services
-
BMP Testing and Calibration Services Inc.
Chemical testing is critical for material and product manufacturing in various industries. It helps identify the contents, composition, and quality of materials used in manufacturing, product development, and other industrial applications. It is also necessary for industries that depend on chemical materials and substances subject to legal regulations, restrictions, standards, and certifications because of their potentially harmful effects for high peroxide strip tests, Chlorine strip tests, the environment, and customers.
-
Product
Gasoline Engine Tachometer
SE-1620
-
The SE-1620 is an engine tachometer that performs measurement of the number of revolutions of a gasoline engine by connecting an engine revolution sensor such as an ignition pulse detector. A 100-mm wide-angle meter is used for the display, and both analog output and pulse output functions are provided as standard.Simply attach an ignition pulse detector or one of our other compatible detectors to the engine to enable measurement of the number of revolutions of a gasoline engine. The inputs, outputs and input power supply are all isolated to ensure the output of analog and pulse signals with superior noise resistance and stability characteristics.
-
Product
Crowdsourced Testing Services
-
CrowdSourced Testing offers companies the opportunity to have their products tested by individuals across the world, using many different devices, system configurations, and networks.
-
Product
Service Lifecycle Management
SLM
-
Align service parts management, technical communication, field service management, and product support operations to maximize customer uptime.
-
Product
Security Testing Service
-
No one on the Internet is immune from security threats. The consequences of a security breach are great:revenue impact, damage to credibility, legal liability, and loss of customer trust. Security testing helps to make data and information on digital networks secure by identifying potential vulnerabilities and flaws in security mechanisms of the network, while ensuring compliance with latest recommended security standards. Security testing assures managements that their systems are secure from attack, vulnerabilities and provides end users with reassurance their data is protected and secured at all times.- Security testing can be carried out in conjunction with or independent of other testing processes- Security testing looks at stopping active intrusion attempts from external sources than fixing only inherent application flaws
-
Product
Engineering Lab Stations
-
Engineering Lab Stations provide an all-in-one solution to engineering education by combining hardware, software, and courseware to give real hands-on experience to students in electronics, mechatronics, and communications courses.
-
Product
Performance Testing Services
-
We're a performance testing company you need to verify your software's speed, stability, and scalability under a variety of loads. By doing software performance testing with us you can eliminate performance problems and launch a future-proof application with high responsiveness and scalability.
