Engineering Services
See Also: Services, Calibration Services, Consulting
-
Product
Non-functional Testing Services
-
Good software has both- efficient functionality and excellent performance. While functional testing pays attention to improve the functioning of the software, our non-functional testing solutions aids in enhancing software performance under various conditions. QACraft has helped several enterprises all over the globe to boost performance by evaluating the software when it comes to software and eradicating the lacking factors from it. Carrying out non-functional testing for the software helps in checking the software’s accessibility, scalability, and responsiveness.
-
Product
Services
-
Our services and technological know how help you attain your business goals as we provide bespoke solutions to meet your specific requirements.The range of Konrad Technologies solutions span from single hardware and software modules, up to the fully automated turnkey systems.
-
Product
Test Services
-
INFRAMET offers two types of services in field of electro-optical imaging systems: 1)Trainining and consulting; 2)Test services.
-
Product
Open Source Service to Help Secure and Trust Your Software
Community Attestation Service / CAS
-
- CAS stores all signatures inside of immudb, the standard for open source immutable databases.- CAS is protected against tampering. All attestation data is integrity-checked and cryptographically verified by the CAS client.- CAS is also protected against MITM attacks. The public key below is checked by every communication.A Software Bill of Materials (SBOM) is a list of components in a piece of software.Like a list of ingredients on food packaging -- where you might consult a label to avoid foods that may cause an allergy -- SBOMs can help companies avoid use of software that may harm their organization.If defects are later found in a specific part, the SBOM makes it easy to locate affected products.
-
Product
JETCAL® Engine Analyze
BH112JD-80
-
An operator can program the Data Acquisition Unit (DAU) withthe appropriate frequency and pressure calibrations required totest 10 selectable engine types. Test results may then be printedimmediately using the printer installed in the unit.
-
Product
Engine Dynamometer
DE250
-
Power: 335 hp (250 kW)Torque: 886 lb-ft (1,200 Nm)Speed: 8,000 rpmWater Use*: 47 gpm (177.9 lpm)Inertia Value: 11 lb·ft2 (0.464 kg·m2)Shipping Weight: 3,086 lb (1,400 kg)Rotation: bi-directional*No Cooling System
-
Product
Services
-
Application & retrofit, start up, training/tech support, and more from TLP Solutions
-
Product
Analytical Services
-
At IONICON we believe that we can only serve you well, if we understand your needs and have expertise in analytical services ourselves. Therefore we have built a team of chemists and physicists, who have many years of experience, not only conducting active research with PTR-MS and other analytical methods, but also working together with customers in many different applications.
-
Product
Engineering Data Management SOoftware
EDM Modal
-
Engineering Data Management (EDM) is a PC-based software program designed for real-time data management and processing. This easy-to-use, Windows-native software manages the communication between the PC and all Crystal Instruments hardware platforms.
-
Product
Calibration / AVP Service
-
Comware Technical Services, Inc.
Regular calibrations / AVPs will help ensure the measurement integrity of your system. We supply the calibration equipment or you can provide us with your own in-house equipment.
-
Product
Build to Print Services
-
Amfax are a Build to Print manufacturer with the production and quality processes necessary to service the demanding Aerospace, defence and commercial markets, but it is our extensive engineering and manufacturing expertise that really differentiates us. As a leading test system integrator and supplier, we are able to apply this expertise to your Build-to-Print projects.
-
Product
Test Automation Service
-
Test Automation framework and test development. Mobile Test Automation. Test Automation execution and maintenance.
-
Product
Digital Mission Engineering
-
From chip to mission, connect modeling and simulation efforts across all phases of the engineering product life cycle. Model multi-domain operational environments, including land, sea, air and space, with accurate, dynamic, physics-based simulations. Integrate with the Ansys portfolio of multi-physics tools and solvers to achieve unmatched end-to-end modeling and simulation.
-
Product
Thin Films, Plasma and Surface Engineering
-
A residual gas analyser for vacuum process analysis. Measures the vacuum process gas composition, contamination and leak detection.
-
Product
Thermal Characterization Testing Services
-
Thermal Engineering Associates, Inc.
Thermal Characterization - TEA offers this service to customers having need for precise thermal parameter values for product data sheets, purchase specifications, specific application configurations, and/or device comparisons. This service is offered for a wide range of Discrete Devices (i.e., Bipolar Junction Transistors, MOSFETs, IGBTs, Diodes, SCRs, Triacs) and Integrated Circuits (i.e., digital, linear and mixed-signal devices).
-
Product
Calibration Services
-
Your CLIO hardware can be furnished with (or be submitted for) a SIT Certificate of Calibration. This document, produced by a laboratory accredited by the Italian Calibration Service, reports measurement data of the primary quantities generated and analyzed by the instrument (AC Voltages) traceable to National and International Standards. This document is usually requested for ISO compliance.
-
Product
Calibration and Measurement Services
-
A uniform light source which provides spatially uniform luminance and illuminance for flat-field correction and calibration imaging systems, calibration photometers and spectroradiometers.
-
Product
Infrared Simulation Services
-
INO offers a simulation service to assist with the hardware and software design of infrared and electro-optical devices. Precise performance predictions help integrators understand application requirements and bring application performance in line with client specificationsbefore the advance design and fabrication phases. For a minimal investment, infrared simulations help minimize risk in the early stages of development.
-
Product
Engine Dynamometer
DX34
-
Power: 1,000 hp (746 kW)Torque: 3,217 lb-ft (4,361 Nm)Speed: 4,000 rpmWater Use*: 73 gpm (276.3 lpm)Inertia Value**: 82 lb·ft2 (3.5 kg·m2)Shipping Weight: 1,846 lb (837 kg)Rotation: bi-directional
-
Product
Engine Dynamometer
DE30
-
Power: 40 hp (30 kW)Torque: 70 lb-ft (95 Nm)Speed: 14,000 rpmWater Use*: 10 gpm (37.9 lpm)Inertia Value: 0.40 lb·ft2 (0.0168 kg·m2)Shipping Weight: 1,213 lb (550 kg)Rotation: bi-directional*No Cooling System
-
Product
Engine Dynamometer
DX3012
-
Power: 3,000 hp (2,237 kW)Torque: 9,651 lb-ft (13,085 Nm)Speed: 4,000 rpmWater Use*: 218 gpm (825.2 lpm)Inertia Value**: 239.1 lb·ft2 (10.1 kg·m2)Shipping Weight: 3,423 lb (1,553 kg)Rotation: bi-directional
-
-
Product
Failure Analysis Services
-
BMP Testing and Calibration Services Inc.
Failure analysis plays a crucial role in product development that enables industries to prevent future product failures and improve them for the end-user. It’s a multi-faceted approach to finding how and why a product failed and involves an in-depth investigation of the circumstances surrounding the failure and discovery of relevant background information, including but not limited to the type of application, environmental factors, service life, and pertinent design information.
-
Product
Failure Analysis Services
-
Innovative Circuits Engineering, inc
Innovative circuits engineerin's failure analysis group performs root cause analysis on a wide variety of integrated circuit devices.
-
Product
Service Assurance And Analytics
-
VIAVI Service Assurance provides a proactive system to quickly trend, identify, and resolve video and audio issues providing an overall subscriber QoE from ingest all the way through to the subscriber addressing multicast and unicast wireline networks.
-
Product
Reverse Engineering 3D Scanner
peel 3.CAD
-
peel 3.CAD is your go-to fully integrated 3D scanning solution for all your reverse engineering needs. Extract all the information you need and send them right to your preferred CAD software.
-
Product
Performance Testing Services
-
Alphabin Technology Consulting
There are over 1.5 million mobile apps that are abandoned due to performance issues. Guard your application with our performance testing services.
-
Product
AC Engine Dynamometer
DA100
-
Power: 100 hp (74.6 kW)Torque: 175 lb-ft (237.3 Nm)Maximum Speed: 8,500 rpmConstant Torque Range: 0 - 3,000 rpmConstant Power Range: 3,000 - 5,100 rpmDecreasing Power Range: 5,100 - 8,500 rpmRotation: bi-directional
-
Product
Assessment Services
-
Datacolor assessment services ensure that supply chains are qualified and capable of meeting expectations for color quality. Helping brands, vendors and suppliers dramatically reduce the time and cost of product development.
-
Product
Quality Vision Services
QVS
-
Quality Vision International Inc.
Quality Vision Services Incorporated is the North American service division of Quality Vision International. QVS provides technical support, field service, calibration, and upgrade services for measuring systems manufactured by QVI.
