Product

Infrared Microscope

DDR200 & DDR300

-

McBain Systems

DDR200 & DDR300 - McBain Systems

The McBain DDR200 and DDR300 for 200mm and 300mm wafer defect detection and review are unmatched in value and features in this special application and price category. The systems offer significant and unique advantages for both production and engineering use, and provide an ideal solution when both defect detection and dimensional metrology are required.

Product

Handheld Optics

-

Teledyne FLIR

Teledyne FLIR

Teledyne FLIR Handheld Optics Solutions

Product

Field-installation Type Dissolved Oxygen Meter (Four-Wire Transmission, Optical Type)

HD-200FL

-

HORIBA, Ltd.

HD-200FL - HORIBA, Ltd.

Optical dissolved oxygen sensor with no electrolyte replacement and rugged membrane.Highly intelligent, including automatic recognition of membrane properties when replacing the sensor cap.The HD-200FL is an optical (fluorescent) dissolved oxygen meter suitable for monitoring aeration tanks used for sewage treatment, effluent treatment, and other processes. Compared to conventional membrane polarographic type sensors, there is no need for electrolyte (internal fluid) replacement or warming, up. Characteristics of optical sensors are utilized to realize unequaled, improvement in ease of maintenance and reduction in running costs. Moreover, it features enhanced user-friendliness, with sensor caps that have built-in memory and a membrane replacement notification function.

Product

Four outputs FTTB CATV optical receiver

B9428

-

Hangzhou Huatai Optic Tech. Co., Ltd.

B9428 - Hangzhou Huatai Optic Tech. Co., Ltd.

Huatai B9428 product series, 47~862MHz operate bandwidth, output level Vo=88dBμV ( Pin=-2dBm ), suitable for FTTP optical fiber access network, which is a low power consumption, high performance, and excellent cost performance RFTV broadcast network ONU(Optical network unit). This series of product adopts high sensitivity receiving tube and Huatai special low noise matching circuit Under 3.8% modulation, when transmitting in full channels and with receiving power of -10dBm, the CNR can still reach high index of 45dB. Therefore, if adopting B9428, it is only need very low optical power to reach 45dB CNR required by the user.

Product

Optics Test Equipment

MTF Measuring Systems For Industrial Applications

-

Optik Elektronik Gerätetechnik GmbH

MTF Measuring Systems For Industrial Applications - Optik Elektronik Gerätetechnik GmbH

The MTF (modulation transfer function) is a recognized quality criterion for the imaging quality of optics. OEG GmbH develops and manufactures computer-controlled, fully automatic measuring systems for MTF and other parameters for quality assurance in optics production, incoming goods inspection, research and teaching.

Product

Digital Microscopes

-

Leica Microsystems

Leica Microsystems

Digital microscopes are microscopes without eyepieces. A digital camera acts as a detector. Images are displayed on a screen or monitor, turning the microscopy workstation into an ergonomic digital workplace.

Product

Mini OTDR Fiber Optic Reflectometer with VFL OPM Laser Source

MT-1300 Plus

-

Guangzhou Wanglu Communications Co., Ltd.

MT-1300 Plus - Guangzhou Wanglu Communications Co., Ltd.

- Display: 3.5 inch color TFT-LCD screen- Handheld design, light weight and easy operation- Single mode: 1310/1550 nm- Dynamic range: 24 / 22dB (can test about 60 km)- Automatic measurement mode: 1310/1550 nm dual wavelength can be tested simultaneously- Applicable fiber: SM- <8m extra-short event dead zone- Wavelength: 1550nm- Up to 24dB High Dynamic Range- Distance Range: 4,8,16,32,64,128,256km- Pulse width: 3ns-10us- RJ45 cable TDR test & cable sequence test- Optical power meter, Visual fault locator, Laser source- Event Map, can display the length of the link, the type of event point and the position of break point.- USB interfaces, supporting USB stick and printer and direct cable download to PC via ActiveSync- LED light- Built-in friendly-environment lith ium battery with high capacity for over 12 hours of operating life

Product

Bare Fiber Aligner

1120

-

Photon Kinetics

1120 - Photon Kinetics

The Photon Kinetics 1120 Bare Fiber Aligner makes it possible to reduce test setup time to seconds, thereby reducing overall testing cost. Just strip the fiber, scribe and break it (or use a more precise fiber cleaver, if desired) and then insert the prepared end into the 1120. In an instant, the fiber is coupled to your OTDR or chromatic dispersion test system with low optical loss and low reflectance. The 1120's compact, ergonomic industrial design is well-suited for low to moderate volume fiber and cable testing applications where automated fiber alignment systems are less economical. It is particularly useful as part of an in-process or finished cable test station employing either the 8000i or 8000 OTDR, and the OASYS.net OTDR Automation Software.

Product

Easycheck Fiber Endface Inspector

CA3002

-

UC Instruments, Corp.

CA3002 - UC Instruments, Corp.

The integrated style design makes the size compact and operation easy. You are no longer to worry about so many cables between monitor and microscope, greatly saving the time for operation and worktable space, thus creating more productivity. Easycheck have a series different model according to different application, it has photo capture function; for transceiver checking; X、Y adjustable; image auto analysis and judgement, etc. The user can choose the desired model per the requirement.

Product

TS Stream Optical Transceiver

OD2000

-

Hangzhou Huatai Optic Tech. Co., Ltd.

OD2000 - Hangzhou Huatai Optic Tech. Co., Ltd.

Huatai OD2000 digital fiber transmission system is designed and produced specially for long transmission and network construction of DVB DTV TS stream. OD2000 can modulate the MTS program signal (coming from the 1~8 ways separate multiplexer at the head-end generator room) to FMTS optical signal high-speed code stream. It is an important device to transmit TS stream between DTV head-ends.

Product

Digital Microscope Camera

-

Dewinter Optical Inc.

Dewinter Optical Inc.

Providing you the best range of digi eye 510 microscope camera, digital microscope camera, digi eye 510c microscope camera, digi eye 210 digital microscope camera, digi eye 510c digital tablet and digi 4k microscope camera with effective & timely delivery.

Product

Dual Channel Optical Power Meter

UC8202

-

UC Instruments, Corp.

UC8202 - UC Instruments, Corp.

The UC8202 Dual channel optical power meter offer superior performance for the test of DWDM components, AWG , WSS, OPM, PLC components, optical amplifiers, transceiver/receiver and other general purpose of fiber optical test and measurement applications

Product

Digital Microscopes

-

Vision Engineering Inc.

Vision Engineering Inc.

Great for capturing and sharing digital information with anyone, anywhere, digital microscopes by Vision Engineering are built with quality to last a lifetime. Powerful and easy to use, their versatile, operator-friendly design means they can be repurposed as your needs change, protecting your return on investment.

Product

1310nm Direct Modulated Optical Transmitter

ONT-8600AR

-

Hangzhou Huatai Optic Tech. Co., Ltd.

ONT-8600AR - Hangzhou Huatai Optic Tech. Co., Ltd.

Huatai 1310nm direct modulation optical transmitter, adopts high linearity DFB laser of famous brand in the world, and builds-in perfect pre-distortion adjustment circuit and laser APC, ATC closed loop control circuit. All the operating parameters are controlled by microprocessor, and the LCD screen on the front panel can display relative operating status and the fault information. ONT-8600AR has all the technical characteristic and function of ONT-8600AS. For its rainproof structure, it can be installed outside and its power supply is 220VAC or 60VAC optional.

Product

High-Speed Optical Delay Line

-

MesaPhotonics, LLC

MesaPhotonics, LLC

The Peregrine Optical Delay Line (1-cm, 60 ps delay) and the Gyrfalcon Optical Delay Line (2-cm, 120 ps) are high-speed, high precision, voice coil motor optical delay lines. They have zero-backlash and no hysteresis. Both have similar form factors that are compatible with 30-mm cage components and 1.035” – 40 threads. Both include full digital and analog control and include a USB interface.

Product

TOC-L For Monitoring A Microscopic Algae Biomass

-

Shimadzu Corp.

Shimadzu Corp.

Biomass is considered a prospective new energy source. The dry weight method has been typically used to determine the amount of microscopic algae in biomass. However, Shimadzu proposes a new method, one that is rapid, easy, and accurate, utilizing the TOC-L total organic carbon analyzer.

Product

Fiber Fusion Splicer

KL-500

-

Hangzhou Softel Optic Co., Ltd.

KL-500 - Hangzhou Softel Optic Co., Ltd.

Fusion Splicer

Product

PXI Single 2 Channel Fiber MUX SC

40-855-212-M

-

Pickering Interfaces Inc.

40-855-212-M - Pickering Interfaces Inc.

Pickering PXI Fiber Optic MEMS Switching cards are available in many high density formats with a choice of 5 different connector styles to suit most applications: FC/APC (for optimal performance), FC/PC and SC/PC for general applications and LC and MU for high density applications. Fiber optic multiplexers create a signal path by redirecting the optical signal into a selected output fiber. This is achieved using Micro-Mechanical Mirrors driven by a highly precise mechanism and activated via an electrical control signal.

Product

Fiber Optic Loopback

LC/SC/MTRJ

-

Huihong Fiber Inc

LC/SC/MTRJ - Huihong Fiber Inc

Fiber Loopbacks is designed to provide a media of return patch for a fiber optic signal; typically it is used for fiber optic testing applications or network restorations. For the testing applications, the loopback signal is used for diagnosing a problem. Sending a loopback test to network equipment, one at a time, is a technique for isolating a problem.

Product

Optical Switches

-

Senko Advance Co., Ltd

Senko Advance Co., Ltd

Optical Switches by Senko

Product

1211a Optical Receiver/Distribution

-

Precise Time and Frequency, Inc.

Precise Time and Frequency, Inc.

To complement the range of high quality frequency and timing references, Precise Time and Frequency, LLC. has now introduced a new Optical Time Code Receiver, with Auto Switching, a full complement of time code outputs, and Ethernet/RS232 remote monitoring/control interface.In addition to the auto switching capability, the new ptf 1211A delivers up to thirty six channels of Time Code outputs, including re-transmission of the optical input. The unit can accept a pair of inputs (usually from separate primary and backup sources), and provides monitoring of both the inputs and outputs for signal integrity.If the primary input fails, the unit will automatically switch to the backup input and indicate a primary signal fault.Full remote monitoring and control via RS232 and Ethernet interfaces includes telnet, http (web browser), and SNMP protocols.