Product

Erbium Doped Fiber Amplifier

EDFA

-

Fibotec Fiberoptics GmbH

EDFA - Fibotec Fiberoptics GmbH

EDFAs are based on the light amplification in erbium-doped fiber, which are optically pumped by means of 980 nm or 1480 nm light sources. In this way, the light of a larger wavelength within the C or L band applied to the input of the amplifier is amplified, thus widening the range of optical communication links. EDFAs typically operate in saturation and the average signal power determines the average gain. The dynamics of EDFA are unaffected by the sequence and dynamics of a digital signal or channel interaction in DWDM systems. As a result, multiple channels can be bundled within the total erbium spectral amplification bandwidth. However, the total average output power in both cases is determined by the saturation power of the specific EDFA.

Product

Loopbacks

-

Amphenol Fiber Systems International

Amphenol Fiber Systems International

Amphenol Fiber Systems International (AFSI) has developed the Loopback TFOCA and TFOCA-II® plug configuration as an aid to system maintenance and troubleshooting of the tactical cable reels and systems that use them. The Loopback plugs come in a variety of configurations from 0 dB to -23dB to simulate a system operational condition. The use of the Loopback plug enables a technician to test a cable reel in the bi-directional mode by simply swapping leads on the test meter, thus saving considerable time and effort in establishing a systems operational status.

Product

Optical Fiber

10 Gbps SFP+

-

Liverage Corp

10 Gbps SFP+ - Liverage Corp

Are designed for 10 Gbps serialoptical interfaces for data communications with multimode fiber (MMF).

Product

Optical Fiber 1×25 Switch

OFSW - 1 × 25

-

Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW - 1 × 25 - Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW- 1×25 is a 1×25 prism optical switch. It can support 1 optical fibers input and 25 fiber output, channel switch. Wide operating wavelength range, low insertion loss and speedy switching rate, can use network trends configuration, network monitor and lab application.

Product

Fiber Optic Tester

OPTOWARE-FTTx-PON Test Solutions

-

Notice

OPTOWARE-FTTx-PON Test Solutions - Notice

FTTx networks using PON technology can be characterized and maintained every step of the way using very simple new fiber-optic test equipment.

Product

Ytterbium-doped Fiber Amplifier

YDFA

-

Amonics Ltd.

YDFA - Amonics Ltd.

Ytterbium-doped Fiber Amplifier (YDFA) is another Amonics specialised product line. Like our highly recognized optical amplifiers, the YDFA offers high output power and high gain with exceptional reliability. ideal for high power YDFA applications. The turnkey microprocessor controlled benchtop YDFAs manage alarms and status indicators. An integrated RS232 or Ethernet computer interface enables easy control, diagnostic functions and data acquisition. Available options include single frequency operation, linearly polarized operation.

Product

Mini Fiber Optical Switch at Single Mode Latching 1310/1550nm 5V with LC/PC Connector

SUN-FSW-1x4

-

Guilin GLsun Science and Tech Group Co., LTD

SUN-FSW-1x4 - Guilin GLsun Science and Tech Group Co., LTD

GLsun 1*4 Optical Switch micaro optical switch informationFeatures•Low Insertion Loss•Wide Wavelength Range•Low Crosstalk•High Stability,High Reliability•Epoxy-free onOptical Path•Latching and Non-latchingApplications•F&D in Laboratory•System Monintoring•OADM•MAN(Metropolitan Area Network)•Network Security and MonitoringSpecificationsParameters Unit SUN-FSW-1×4Wavelength Range nm 850±40 / 1300±40 1260 ~ 1650Test Wavelength nm 850 / 1300 1310 / 1550Insertion Loss 1, 2 dB ≤1.0Return Loss 1, 2 dB MM ≥ 30 SM ≥ 50Crosstalk 1 dB ≥ 55PDL dB SM ≤0.1WDL dB ≤0.25Repeatability dB ≤±0.02Operating Voltage V 3.0 or 5.0Voltage Pluse Width(Latching) ms ≥ 20Durability Cycles ≥ 10 MillionSwitching Time ms ≤8Optical Power mW ≤500Operating Temperature ℃ 0 ~ +70Storage Temperature ℃ -40 ~ +85Relative Humidity % 5 ~ 95Dimension mm (L)33.5×(W)25.5×(H)9.5 ±0.2Note: 1 Within operating temperature and SOP.2 Excluding connectors.GLSUN 1x4 fiber optic switch micaro optical switch

Product

100GHz Single Fiber Bi-Direction Dense WDM

DWDM-1200

-

Hangzhou Huatai Optic Tech. Co., Ltd.

DWDM-1200 - Hangzhou Huatai Optic Tech. Co., Ltd.

Huatai DWDM-1204, DWDM-1208 dense DWDM DWDM, which is based on mature thin film filtering technology, It has the feature of low insertion loss, high isolation and flexible channel configuration. It can bi-direction transmit 4 channel(1204) or 8 channel(1208) on one fiber up stream/down stream.

Product

Field Fiber Cleaver

HW-09C

-

Shanghai Fibretool Technology Co.,Ltd.

HW-09C - Shanghai Fibretool Technology Co.,Ltd.

The Fibretool HW-09C is a single fiber cleaver designed to accommodate either 900µm buffered or 250µm coated fiber. The HW-09C cleaver's quick and easy three-step operation is well suited for mechanical splice and quick termination field connector applications. The leaf spring base is ruled to allow for cleave lengths of 2 to 20mm. The standard carbide blade will perform up to 6000 cleaves before replacement.

Product

Fiber Optic Rotary Joints

-

Everaxis

Everaxis

Fiber Optic Rotary Joints ensure flawless high-speed data transmission even in environments with strong electromagnetic interference. They are a maintenance-free alternative that eliminates friction and/or heating between rotating and stationary components.

Product

Fiber Optics

-

Blonder Tongue Laboratories, Inc.

Blonder Tongue Laboratories, Inc.

Blonder Tongue has a comprehensive line of robust fiber optic transmitters and receivers for optical networks delivering both broadband CATV and data within campus-style environments with up to 1000 MHz bandwidth.

Product

Single Fiber Aligner

1100

-

Photon Kinetics

1100 - Photon Kinetics

The 1100 Single Fiber Aligner uses patented fiber alignment concepts to produce virtually instantaneous temporary couplings for OTDR, dispersion, or any other optical fiber or component test that requires a fiber-to-fiber connection. It delivers low loss, low reflectance couplings on the first try virtually every time, without the need for test instrument feedback. As a result, temporary coupling times are minimized and manufacturing costs are reduced without compromising product quality.

Product

1.0µm PM Fiber Amplifier ( PM YDFA )

HAPM1000

-

Hangzhou Huatai Optic Tech. Co., Ltd.

HAPM1000 - Hangzhou Huatai Optic Tech. Co., Ltd.

Huatai HAPM1000 is a Polarization Maintaining Fiber Amplifier which worked in 1050~1080nm operating wavelength. Adopt Polarization Maintaining (PM) ytterbium-doped fiber, output optical power range 0.5W~5W, extinction ratio >20dB.

Product

Fiber Fusion Splicer

AV6471

-

Hangzhou Softel Optic Co., Ltd.

AV6471 - Hangzhou Softel Optic Co., Ltd.

The fiber fusion splicer(AV6471A )is FTTH fiber splicing machines is a new design of the optical fiber in equipment. In the light of the special FTTH environment.

Product

Professional LAN Cable Tester w. 4 Remote Loopback Plugs

LANTESTPRO

-

StarTech.com USA LLP

LANTESTPRO - StarTech.com USA LLP

The StarTech.com Advanced RJ45 LAN Cable tester allows a single person to test several long cables faster and more efficiently than ever before. The tester uses remote loop-back plugs that each have their own unique ID number that the tester can identify.

Product

Fiber Manufacturing

-

Photon Kinetics

Photon Kinetics

From preform fabrication to final quality control, our fiber test instruments are designed to provide a complete end-to-end solution for all of your testing needs. Our technology is so widely used that virtually all fibers produced globally encounter multiple PK instruments before leaving the factory.

Product

Fiber Optics

-

Avantes Inc.

Avantes Inc.

The use of fiber optics as light guidance allows great modularity and flexibility in the setup of an optical measurement system. Optical fibers can be made of many materials, such as plastic, glass, and silicates (SiO2). For high-quality fibre optics, as used in spectroscopic applications, synthetic fused silica (amorphous silicon dioxide) is used, which can be intentionally doped with trace elements to adjust the optical properties of the glass.

Product

RF over Fiber Link TX/RX

L-Band

-

QuestTel

L-Band - QuestTel

QuestTel''s Satellite L-Band optical fiber Transmitter/Receiver set offers high pefromance and cost effective alternative to conventional coaxial systems. The L-Band Transmitter and Receiver pair is used for transporting L-Band RF over fiber from the antenna to the satellite receiver. Additionally transmitter provides optional 13/18V LNB power as well as Automatic Gain Control (AGC) to manage RF input level. By transporting the L-Band RF over fiber this range can be extended from several hundred feet to over 80 miles. Since optical signal is not affected by electromagnetic field, the quality of your signal will always stay at the high level. Also this fiber solution is more cost effective than coaxial system, as well as more reliable and flexible.

Product

Optical Protection System ( Single Fiber Two-Way )

OPS-1000

-

Hangzhou Huatai Optic Tech. Co., Ltd.

OPS-1000 - Hangzhou Huatai Optic Tech. Co., Ltd.

OPS-1000 Optics Protection System product series, mainly applies to optical communication field of single fiber two-way for main, light path switching equipment. It makes up from light path switching unit, optical power monitoring unit and network management terminal. In optical communication networks, OPS-1000 real-time monitor the optical power of operating fibers and spare fibers, when monitor the optical light path’s optical power is lower than setting switching threshold, it will alarming prompt and switch to the spare fiber to realize the line protection of optical transmission system.

Product

Fiber Optic Type Chemical Solution Concentration Monitor

CS-100F1 Series

-

HORIBA, Ltd.

CS-100F1 Series - HORIBA, Ltd.

The CS-100F1 Series is equipped with fiber optics cable based on the CS-100 Series. It offers real-time, in-line measurements by directly integrating the sample cell into the cleaning system piping and by using a fiber optic cable for light signal transmission. A single concentration monitor can take up to four measurements and monitoring of multiple chemical solutions in a single-bath or single-wafer cleaning system is also possible.