Product

VHF True RMS Probe

-

COMM-connect

COMM-connect

The VHF True RMS Probe is a frequency compensated power probe capable of measuring power even in a multiple carrier installation. Regardless of physical waveform, the probe will measure the True RMS power of the signal. When used together with our Broadcast Power Monitor type 3024, you can add Web and SNMP capabilities to your mast site installation.

Product

AGC, SNMP Bi-Direction Optical Receiver

NGB-9912, NGB-9924

-

Hangzhou Huatai Optic Tech. Co., Ltd.

NGB-9912, NGB-9924 - Hangzhou Huatai Optic Tech. Co., Ltd.

Huatai NGB-9912 ( two-port  ), NGB-9924 ( four-port ), is a type of high-grade AGC, Network management, Bi-direction, outdoor optical receiver. Various operating parameters of machine are microprocessor-controlled, LED display. Through the keys of machine can adjust and set EQ、ATT. Optional network transponder, implement remote network management. Large dynamic range of optical AGC characteristics, NGB-9912 ( two-port  ), NGB-9924 (  four-port ) high output ,for FTTC, FTTN fiber access network. As a unit of CATV network RX, is a high performance, highly flexible, cost-effective CATV opical receiver.

Product

HFC 8 Ways Return Path Optical Receiver

HR2080A, HR2080B

-

Hangzhou Huatai Optic Tech. Co., Ltd.

HR2080A, HR2080B - Hangzhou Huatai Optic Tech. Co., Ltd.

HR2080 series HFC 8 ways return path receiver can convert upstream optical signal to RF signal at the head-end and remote control center. 8 independent receivers integrated into a 1RU 19” casing to supply service for HFC network terminal. Receiver's low noise design, -22dBm receive sensitivity can provide service to farther place. There are two versions of this receiver. HR2080A with LCD on the front panel, HR2080B without LCD. All receivers are temperature tolerance type can be installed in any network surroundings including out-door type. Both of these two types can adopt SNMP function which can control the front panel to realize optimization work at the head-end and remote installment.

Product

MIMIC® IOS Simulator

-

Gambit Communications, Inc.

Gambit Communications, Inc.

MIMIC IOS Simulator is a command line simulator that fully supports Cisco IOS® software as well as NX-OS, JUNOS, NETCONF, other command line interfaces and SNMPv1, v2, v2c, v3. You can simulate up to 100,000 devices in a single workstation, and an unlimited number of devices can be simulated by distributing it over multiple workstations. You can access devices using Telnet, SSH and SNMP. Changes made using one protocol is reflected in the other.

Product

SNMP Test Suite

SilverCreek

-

InterWorking Labs, Inc.

SilverCreek - InterWorking Labs, Inc.

SilverCreek is the Authoritative SNMP Test Suite -- designed to test implementations of the Simple Network Management Protocol (SNMP agents) and standard and private MIBs (Management Information Bases). SilverCreek incorporates thousands of small, single function tests written in the Tcl scripting language to exercise one or a small number of parameters. The syntactic tests verify protocol compliance, error and exception handling, and boundary condition behavior. The functionality tests (semantic tests) verify performance, trap/alert/event/notification handling, counter accuracy, security, and many other implementation specific areas.

Product

HFC 4 Ways Return Path Optical Receiver

HR2040A, HR2040B

-

Hangzhou Huatai Optic Tech. Co., Ltd.

HR2040A, HR2040B - Hangzhou Huatai Optic Tech. Co., Ltd.

HR2040 series HFC four ways return path receiver can convert upstream optical signal to RF signal at the head-end and remote control center. Four independent receivers integrated into a 1RU 19” casing to supply service for HFC network terminal. Receiver's low noise design, -22dBm receive sensitivity can provide service to farther place. There are two versions of this receiver. HR2040A with LCD on the front panel, HR2040B without LCD. All receivers are temperature tolerance type can be installed in any network surroundings including out-door type. Both of these two types can adopt SNMP function which can control the front panel to realize optimization work at the head-end and remote installment.

Product

Remote Monitor Management Information Base

SNMP RMON MIB

-

InterWorking Labs, Inc.

SNMP RMON MIB - InterWorking Labs, Inc.

For every control table in the MIB, create and delete rows with various combinations of SNMP requests (all variables in a single request throughall variables in individual requests).Determine which row of this table is modeling the ethernet interface connected to the agent (requires that we are using ethernet). Check that this is for the same interface discovered in the "interfaces" test. Check counters.Build a history control row pointing to the interface connected to the agent. Check validity and traffic reported.Test agent's ability to generate an alarm on an RMON variable, then on threshold condition. Test for support of alarms on failing events, and in the event of target variable vanishing.Set up agent to track hosts on the ethernet interface connected to the agent. Check that entry was added for Rmon device's own ethernet address.Generate various top N reports (hostTopN test) and check validity.Start a matrix capture and check that the src-dst and dst-src tables are in sync.Check a channel and check for event generation (filter test).Create a channel and start a capture. Test locking and wrapWhenFull operation.

Product

SNMP Agent

-

EDB GmbH

EDB GmbH

The SNMP Agent provides comprehensive monitoring features on all technical layers and an SNMP MIB consisting of more than 1000 SNMP operations and traps.

Product

SNMP Client

-

EDB GmbH

EDB GmbH

The SNMP Client ‘SAMager-Console’ is a comprehensive Network Management System (NMS) software for operators, service staff and system engineers, especially suited to monitor Digital TV and/or Mobile DTV networks.

Product

Ethernet I/O Modules With Daisy Chain

ADAM-6200

-

Advantech Co. Ltd.

ADAM-6200 - Advantech Co. Ltd.

Ethernet remote I/O modules with daisy chain connect the edge to the Azure cloud, and AWS through protocols MQTT(TLS), SNMP, RESTful and HTTP.

Product

5KVA to 100KVA Industrial UPS (3Ø – 1Ø)

NSP Series 5KVA to 100KVA

-

Aplab Limited

NSP Series 5KVA to 100KVA - Aplab Limited

- Designed for powering critical Industrial and IT systems- DSP controlled IGBT based PWM technology- Design topology enables N+1 parallel redundancy- Industrial grade high speed CAN bus communication- User Friendly Matrix LCD and LED mimic front control and digital monitoring- Fully rated make before break maintenance bypass operation- Optional break-less load transfer via static switch- Low harmonic distortion- High crest factor tolerance and dynamic stability- Lower TCO- Continuous full rated power at ambient as high as 45°C- N+1 Parallel operation of UPS without any common hardware- Advanced Communication Capability (RS485/Modbus/SNMP)- High branch fuse clearing capacity- On-line battery bank test without load disconnection- Compact, elegant, and light weight enclosure- Easy installation with wheels for maneuverability and front bottom terminals

Product

1211a Optical Receiver/Distribution

-

Precise Time and Frequency, Inc.

Precise Time and Frequency, Inc.

To complement the range of high quality frequency and timing references, Precise Time and Frequency, LLC. has now introduced a new Optical Time Code Receiver, with Auto Switching, a full complement of time code outputs, and Ethernet/RS232 remote monitoring/control interface.In addition to the auto switching capability, the new ptf 1211A delivers up to thirty six channels of Time Code outputs, including re-transmission of the optical input. The unit can accept a pair of inputs (usually from separate primary and backup sources), and provides monitoring of both the inputs and outputs for signal integrity.If the primary input fails, the unit will automatically switch to the backup input and indicate a primary signal fault.Full remote monitoring and control via RS232 and Ethernet interfaces includes telnet, http (web browser), and SNMP protocols.

Product

Network Monitor

PRTG

-

Paessler AG

PRTG - Paessler AG

PRTG monitors all systems, devices, traffic and applications of your IT infrastructure using these technologies: SNMP: ready to use and custom options. WMI and Windows Performance Counters. SSH: for Linux/Unix and MacOS systems. Flows and Packet Sniffing. HTTP requests. Any REST API returning XML or JSON. Ping, SQL and many more.