Inspection
check and evaluate to a quality control value.
See Also: Inspection Systems, Inspection Services
-
Product
Sensor for Filament Inspection
EyeFI
-
EVT presents the EyeFI - the sensor for the inspection of filaments. The sensor contains two cameras with an Aptina sensor and S-Mount lenses. The cameras are perpendicular to each other. It is therefore possible to inspect two sides of the filament, which means that the EyeFI can detect if the filament is out-of-roundness. Additionally the errors and defects can be detected. For example the occurring flaws are point-shaped or partly flaked, or point-shaped and transverse, or also looking like a longitudial rib, or only spots in different shapes. The defects can be detected with the EyeFI sensor. The EyeFI contains board cameras with sensors from Aptina, the IoCap and an evaluation processor. The housing is about 14x10x4 cm in size. The IoCap is the image-capture-IO-board, which is designed and developped by EVT.
-
Product
System to Handle Wafer Levels
AMI AW Series
-
Operator-Free Wafer Inspection, Analysis and Sorting The AW Series are advanced high-capacity, high throughput automated wafer C-SAM® instruments specialized to deliver maximum sensitivity for the evaluation of wafer and device level applications.
-
Product
Intelligent PCB Inspection
-
It uses a proprietary image analysis system based on Artificial Intelligence. Eliminates time-consuming (re)programming of the process thanks to advanced self-learning. Guarantees high efficiency of the error detection process regardless of the type of component or PCB being inspected. Effectively supports decision-making processes in the area of quality control. Fully compatible with every production line. Ideal for high-variability production models thanks to self-configuration.
-
Product
2D Automated Optical Inspection Systems (2D-AOI)
BF1 Series
-
Saki’s unique line scanning technology and coaxial overhead lighting enables high-speed accurate inspection.
-
Product
Concrete Inspection System
StructureScan Pro
-
Geophysical Survey Systems, Inc.
StructureScan Pro is a versatile concrete inspection system offering a wide variety of antenna options for concrete and other applications. Based on the SIR 4000 controller, the StructureScan Pro provides the GPR professional with solutions to any scanning situation.
-
Product
Property Inspection Solution
DJI / IMGING
-
Advanced DJI drone solutions for the P&C Insurance industry. IMGING™ to conduct full roof and property inspections with incredible detail in as little as ten minutes from start to finish, and they’re getting high-resolution, actionable data they can use to make informed decisions. By combining Insurance-focused workflows and patents-pending autonomous flight control technology, IMGING is making roof inspections safer, quicker, and more consistent. It’s deceptively simple, amazingly powerful, and built specifically for Insurance.
-
Product
Inspection Solutions
-
Entire range of optical inspection systems. From the SPI machine (SPI inspection) for checking solder paste printing, to an inline AOI for THT or SMD-assembled PCBA, to AXI machine for BGA x ray inspection. And furthermore, GÖPEL electronic's AOI PCB inspection can be used for conformal coating inspection (CCI) of various protective coatings applied to boards.
-
Product
Real-time X-ray Inspection Systems
JewelBox Series
-
JewelBox x-ray inspection systems feature ultra-high resolution, powerful microfocus x-ray tubes, five-axis, and positioners. The JewelBox Series is divided into three broad categories: JewelBox 70-T, JewelBox 90-T and Ultra Compact each of which can be customized for specific applications.
-
Product
Robotic 2D & 3D Vision Inspection
EyeT+Inspect
-
EyeT+Inspect is the outstanding 3D device for robotic visual inspection combining robust 3D vision to inspect product shape with fast 2D vision to inspect product surface. EyeT+Inspect optimizes production thanks to automatic and objective removal of defective products from the production line.
-
Product
Industrial CT X-Ray Inspection System
X25
-
The X25 is quite possibly the most conveniently sized industrial CT system on the market. The system offers all of the same features as the larger systems while still maintaining the ability to fit through a standard interior door. The X25 is well suited for small to medium sized objects.
-
Product
Optical BGA Inspection
-
Imaging hidden solder joints of BGA, IBGA, FlipChip, CSP, CGA and SMD components
-
Product
Manual & Automatic Inspection systems
-
Manual and Automatic inspection systems mounted on vehicles such as motortruck, van, railway testing wagons etc. Operation is either on the move or during a stop. Ideal for inspecting transmission and distribution lines and for electric transportation.
-
Product
Signal Integrity Test Products
S1
-
*Fixtureless Test Solution*Automated Optical Inspection*DC Electrical test*Tests any backplane – Small, large, simple, complex*Now available with 4 heads
-
Product
Jeepmeter
-
The output voltage of your holiday detector is subject to influence by weather conditions, moisture on the pipe, improper grounding and soil conditions. In order to assure absolute highest accuracy and performance from your holiday detectors (jeeps), Pipeline Inspection Company has developed three special Jeepmeters for checking detector voltage output.
-
Product
DIP Vision Inspection Machine
Optima III
-
Landrex Technologies Co., Ltd.
DIP Vision Inspection Machine
-
Product
Code Verification Systems for Quality Inspection
-
Matrix codes enable the comprehensive and seamless traceability of goods, which turns out as significant advantage considering everyday product recalls across all industries. Whether salmonella in food, contaminated cosmetics or poor components: defective products can harm consumers, cause losses of image as well as massive economic losses. Using the 2D code, each individual article can be localized globally. Based on the specific serial number, producers and consumers can clearly identify articles if required. That represents a perfect tool for determining whether the article is subject to be withdrawn from circulation. The proper application and specification of 2D code contents allows for serious and sustainable companies to limit recalls, save costs, and to take responsibility for consumer protection.
-
Product
Vacuum Inspection
INDEC
-
INDEC vacuum test systems monitor a wide range of containers during the production process, including bottles, jars and cans, by measuring the cap panel concavity of their closures which is dependent on the vacuum inside. This non-contact inspection reliably identifies defective containers for automatic rejection.
-
Product
Complete Non-Contact Inspection System For OLED/TFT/LTPS
GX3/GX7
-
*Fastest*Workable to large panel as well as fine pattern of medium-small panel*Workable to large mother glass of every generation*Possible to dock width Repair Machine
-
Product
Macro Inspection
-
High-throughput automated macro inspectionAny wafer size, in less than one second with ~75 micron resolutionSmall footprint table-top system
-
Product
Tracing-Type Non-Contact Inspection System For LCD/STN/Touch Panel/FPC
TTS
-
*"Probe + Non-Contact Sensor" enables to delect SHORT after sticking LCD*No Fixture in LCD Inspection*Applicable to FPC Inspection
-
Product
Inspection System
Pixie
-
3-D Metrology for automation. Pixie is a standard system for automated optical quality inspection. Pixie can be configured with 2 to 5 servo driven axis movement and the high-speed measurement capabilities make it suitable for inline and stand-alone solutions.
-
Product
Vison Inspection System
-
High Speed stroboscopic 2D vision inspection system for die attached and wirebond quality in back-end semiconductor processes. User friendly HMI for easy recipe creation and management. Able to configure with various defect identification module. (Strip Mapping, Inker, Scriber, Pucher, Bristle, Laser wire cutter and Laser clip bonding cutter.)
-
Product
NI Vision Builder for Automated Inspection (AI)
-
With Vision Builder AI, you can easily configure your vision system. An easy-to-use interactive development environment replaces the complexities of classic programming, making development and maintenance easy without sacrificing performance or functionality.
-
Product
Foreign Matter Inspection Device For FPDs
HS-930
-
By adopting our original optical technology, we achieve an inspection speed of about 30% up (compared to HS-830). Improved the front / back judging ability to thin substrates.
-
Product
Inspection Kits
-
Elcometer offers one of the widest ranges of inspection equipment available. Our products are used across numerous industry sectors. In all cases, there is always a need to undertake a number of specific inspections during quality control assessments - as one parameter can affect another.
-
Product
Connector Inspection
-
The USB Connector Inspection System features easy focusing with high resolution imaging. The system includes standard software that provides image display, image capture, digital zoom, auto calibration, and basic analysis tools. Pass/Fail analysis and reporting features are optional software features. The Inspection System scope is fully compatible with the FiberWarrior Pro OTDR as well as other FiberWarrior Pro test sets, providing a full fiber optic testing solution.
-
Product
In-line Inspection And Integrity Services
-
The safety, integrity, and operating efficiency of your assets are at the core of what we do. Baker Hughes Process & Pipeline Services (PPS) unique portfolio of services helps you confidently manage the lifecycle of your pipeline—delivering timely and stress-free startup, supporting day-to-day reliability, and enabling controlled decommissioning.
-
Product
Hand-held Fiber Inspection Microscopes
-
The WL-C series hand-held fiber microscopes use coaxial illumination to provide users with maximum detail. It easily can detect the finest scratches and contamination, making it ideal for critically inspecting polish quality.
-
Product
High Precision Angular Positioning Calibration and Geometry Inspection
LabStandard
-
Rotary Precision Instruments UK Ltd
Ultra precise rotary tables intended for fine inspection, metrology and test applications.Designed for horizontal and vertical applications with self-locking worm gearing and a high accuracy angular encoder ensures sensitivity and fine positioning for metrology and precision testing.
-
Product
Semiconductor / FPD Inspection Microscope
MX61L
-
Motorized Microscope for 300mm dia. Wafer/17 inch Glass Substrate use Reflected/Transmitted Illumination.
