Product

PLCC-to-PGA JEDEC Type 0.050 [1.27] Pitch Adaptor

Series 505

-

Aries

Series 505 - Aries

PLCC to PGA Adapter for JEDEC Type .050 [1.27] Pitch Devices.

Product

Probing & Analysis Adapters

-

Ironwood Electronics

Ironwood Electronics

No matter how well designed a circuit is, there is almost always a need to hook up test instruments to it to verify function, look for bugs, or baseline performance. As IC packages become smaller and pin counts grow this becomes harder and harder. probing adapters are required to alleviate this de-bug problem. Many different types of adapters fall into the test and debug category. The common feature is that they bring the signals of an IC out to a format that is easy to interface with test and analysis equipment.

Product

Accessories

-

Amprobe Test Tools

Amprobe Test Tools

Check out the full line of quality Amprobe accessories, which are field tested to help you get the most out of your Amprobe tools, including:*Rugged test leads of all types and sizes for Amprobe instruments*Current transducers for maximum accuracy and safety*Temperature accessories for surface, air/gas, or liquid temperature measurements*AC relays for low-voltage control circuits*Adapters, software, carrying cases and more

Product

1 MOhm Adapter

AP-1M

-

Teledyne LeCroy

AP-1M - Teledyne LeCroy

1 MOhm Adapter

Product

MultifunctionAsync Serial Communications Adapter

2628

-

Technobox, Inc.

2628 - Technobox, Inc.

The Multifunction RS422/RS485/Digital I/O board provides a collection of various interfaces on a single-wide PMC module. The two 16550 UARTs on the board provide asynchronous communication at bit rates to 115Kbaud. The 16550?s are mapped into host processor space so that standard drivers can be used with the board.

Product

2.92mm to ProLink Adapter with Probe Power and Communication Pass Through

L2.92A-PLINK

-

Teledyne LeCroy

L2.92A-PLINK - Teledyne LeCroy

The Teledyne LeCroy LabMaster 10 Zi oscilloscope utilizes precision 2.92mm input connectors to achieve up to 36GHz of input bandwidth. But some applications may require the use of lower-bandwidth probes for performance and cost reasons.The L2.92A-PLINK adapter converts the 2.92mm interface to a ProLink interface. This brings the benefits of a wider selection of probes to the LabMaster 10 Zi such as Dx10/Dx20/Dx00A-AT 4-6 GHz differential probes and DH Series 8 to 20 GHz differential probes using the ProLink oscilloscope probe connection. Full probe power and control is provided through a built-in LEMO interface.

Product

Flexible MiniPCI Express to 2 MiniPCI Splitter

SKU-069-2X

-

Amfeltec Corp.

SKU-069-2X - Amfeltec Corp.

Flexible MiniPCI Express to 2 MiniPCI Splitter (Splitter) was designed to expand a modern motherboard (ATX, mini ATX etc.) that doesn’t have the MiniPCI interface. It allows you to connect up to two (2) 124-pin MiniPCI add-in boards to a motherboard’s standard MiniPCI Express connector.Splitter includes 2 MiniPCI Adapter boards, MiniPCI Express Host board and 2 Flat PCI Express Cables.

Product

Installation Testers/Adapters

-

Testboy GmbH

Testboy GmbH

Using five glow lamps, the rotary field tester, Testboy TV 410N, indicates the presence of all three phases and, through their sequence, determines the correct order of the phases. The housing is made from impact-resistant, unbreakable ABS plastic, the fully insulated 4 mm sockets and the associated comprehensive and adaptable connection cable set provide safe testing and rapid determination of the phasing in a three-phase system.

Product

Tap Adapter

-

Techimp HQ S.r.L

Techimp HQ S.r.L

Techimp Voltage Tap Adapter is gender changer which allows the user to connect to the test tap (sometimes called power factor tap) of high voltage transformer bushings.While keeping the test tap well below the safety voltage level required by the manufacturer, the Tap Adapter lets the user to drain high frequency PD signals for diagnostic assessment of insulating materials.A synchronization signal can be derived as well.It is suitable for both single shot as well as continuous PD monitoring.Although it must be customized on the basis of the shape and dimension of the test tap (to be provided by the Customer), many models are readily available for the most established transformer bushings. A list of the presently available models is reported below.Several thousands of hours of operation are a guarantee of reliability and accurate design.

Product

Chip Test Adapter

RAMCHECK Sync

-

INNOVENTIONS, Inc.

RAMCHECK Sync - INNOVENTIONS, Inc.

The RAMCHECK Sync Chip Adapter tests popular TSOP SDRAM memory chips in sizes of 16Mx16, 4Mx16, 32Mx8, 8Mx8, 64Mx4, 16Mx4 and more. Picture above shows the adapter with all optional sockets for 54, 50 and 44-pin.

Product

Surface Mount-to-DIP JEDEC SOT-25, SOT-23A-6 Adaptor

1110748

-

Aries

1110748 - Aries

Surface Mount to DIP Adapter for SOT-25, SOT-23A-6. Allows for breadboarding or substitution of microgate SOT-23A-6 and SOT-25 IC and transistor packages into .100 [2.54] pitch proto boards or PC boards. Solder masked top-side pads allow user to hand solder devices directly to topside of adapter with fewer problems of solder bridging. Longer male bottom pins are available at special request for easy use of probe clips. Large topside pads allow for soldering test pins, jumpers, etc. to top of adapter.

Product

Back Pressure Tester

MDBPT2

-

Matco Tools

MDBPT2 - Matco Tools

Quickly test for back pressure and identify clogged or obstructed catalytic converters. Three stage adapter (18mm-12mm) for accessing O2 sensor ports or (standard 1/4-20) self tap access anywhere. Adapter flange for common Toyota style O2 sensors.

Product

Hubs & Adapters

-

Satechi

Satechi

Hubs & Adapters

Product

NF-SM 50 N-Female to SMA-Male Adapter

-

Copper Mountain Technologies

Copper Mountain Technologies

NF-SM 50 Adapter, N-Female to SMA-Male, Frequency Range: DC to 18 GHz, Impedance: 50 Ohm

Product

USB I2C Adapter

MS (Master & Slave)

-

Coptonix GmbH

MS (Master & Slave) - Coptonix GmbH

*Plug & Play*No additional driver necessary*HID device drivers are included in major operating systems*Open interface description enables communication without a DLL

Product

Termination

WTER-6N2

-

Warison Technology inc

WTER-6N2 - Warison Technology inc

Warison provides wide range of wireless passive coaxial components, includes Adapters, Attenuators, Coaxial Cables Assemblies, DC Blocks, Filters, Isolators & Circulators, Probes & Terminations. With outstanding capability of development and design, Warison is able to custom the spec based on customer��s demand. All Warison��s products pass inspection and electronic performance test before shipping out. It is our principal to deliver the best solution to all our clients.

Product

SysMon / Shelf Manager Adapter Board

042-751

-

ELMA Electronic, Inc.

042-751 - ELMA Electronic, Inc.

Adapter board for pluggable SysMon and Shelf Manager versions.

Product

Prototyping Adapters/Interposers

-

Winslow Adaptics, Ltd.

Winslow Adaptics, Ltd.

Prototyping adapters breakout from any package type to 2.54mm pitch pins or a larger pitch SMT footprint to solder to your development board. Our extensive design library means that many are available for fast delivery or next day from RS Components.

Product

PCIe Gen 4.0 RAID Adapter

MegaRAID 9580-8i8e

-

Broadcom Limited

MegaRAID 9580-8i8e - Broadcom Limited

The MegaRAID 9500 series is the industry’s first PCIe Gen 4.0 RAID adapter family, offering PCIe Gen 4.0 host and storage interfaces. The MegaRAID 9580-8i8e adapter, based on the SAS3916 high-port count PCIe 4.0 x8 RAID-on-Chip (RoC), delivers twice the performance of previous generations.

Product

MCB Test Option, Monitor Voltage Adapter

PTE-FCB

-

EUROSMC, S.A.

PTE-FCB - EUROSMC, S.A.

The PTE-FCB / PTE-FCD can be used to effectively reduce the sensitivity of the monitor input. The monitor input detects the relay’s operation and stops (or starts) the chronometer when testing with the PTE-100-C, PTE-50-CE, PTE-50-CET, and all LETs excluding the LET-400 (which lacks a chronometer).