3U PXI Chassis
See Also: PXI Chassis, 6U PXI Chassis, Portable PXI Chassis
-
Product
16 Slot 3U VPX Sealed Air Cooled Chassis
Falcon
-
Sealed chassis with high density cooling fins on the inner chassis, cooled by forced air from the front to the back. (ATR type cooling and sealing in 3U VPX) The fans are protected by shields.
-
Product
PXIe-1095, 18-Slot, Up to 24 GB/s PXI Chassis
783882-01
-
PXIe, 18-Slot, Up to 24 GB/s PXI Chassis—The PXIe-1095 features a high-bandwidth backplane and 58 W of power and cooling in every slot to meet a wide range of high-performance test and measurement application needs. The chassis incorporates two hot-swappable power supplies to improve the mean time to repair (MTTR) of the PXI system; it also offers an optional timing and synchronization upgrade that includes a built-in oven-controlled crystal oscillator (OCXO) for increased clock accuracy and external clock and trigger routing. It accepts PXI Express modules in every slot and supports standard PXI hybrid-compatible modules in up to five slots.
-
Product
PCI Express® Bus to 3U PXI Express™ Chassis Expansion Kit
ACL-EXPRESS-1
-
The PCIe-to-PXIe expansion kit includes one PCIe-8560, one PXIe- 8565, and one ACL-EXPRESS cable (1 meter)
-
Product
Chassis - Controls up to 16 Switch Modules in 16x8, 32x4, or Dual 16x4 Configurations
CXB/128-MF
-
These Chassis controls up to 16 switch modules in 16x8, 32x4 or dual 16x4 configurations. Available as single pole systems with the outer conductor of the BNC taken to ground, or isolated 2 pole systems switching both center conductor and ground. LEDs on the front panel show switch and power status. Add Switch Modules, Driver Modules and a Control Module to complete the system.
-
Product
cDAQ-9185, 4-Slot, TSN-Enabled Ethernet CompactDAQ Chassis
785064-01
-
4-Slot, TSN-Enabled Ethernet CompactDAQ Chassis - The cDAQ-9185 is a CompactDAQ Ethernet chassis designed for distributed sensor measurement systems. The chassis controls the timing, synchronization, and data transfer between C Series I/O modules and an external host. With this chassis, you can combine C Series I/O modules to create a mix of analog I/O, digital I/O, and counter/timer measurements. The chassis provides precise, synchronized timing over the network using TSN, ideal for highly distributed measurements over long distances. The chassis has an integrated network switch for simple daisy-chaining. The chassis also has four 32-bit general-purpose counters/timers, accessible through a hardware-timed digital C Series module for applications that involve quadrature encoders, PWM, pulse train generation, and more.
-
Product
Server Chassis
-
From 1U to 4U Rackmount Server Chassis, Advantech aim to provide the best solutions and fulfill the most complex requests from different industrials. The tower chassis series are IPC chassis featuring enhanced storage and high-efficiency power supplies beneficial to Industrial server and application such as AOI.
-
Product
PXIe-1085, 18-Slot (16 Hybrid Slots, 1 PXIe Timing Slot), Up to 24 GB/s PXI Chassis
781813-01
-
PXIe, 18-Slot (16 Hybrid Slots, 1 PXIe Timing Slot), Up to 24 GB/s PXI Chassis—The PXIe‑1085 features a high-bandwidth, all-hybrid backplane to meet a wide range of high-performance test and measurement application needs. The hybrid connector type in every peripheral slot enables the most flexibility in terms of instrumentation module placement.
-
Product
Outdoor Chassis
PXI-8S
-
Specifically designed after customer requirements, the PXI-8S Outdoor Chassis purpose focuses on applications in measurement technology - outdoor acoustic measurements in this case with the possibility to connect up to 64 microphones. Tailored solutions for complex customer requirements is a challenge we're facing with confidence; got yourself a mission critical application lacking that certain something? Contact us for further evaluation and eventual resolution of your problem
-
Product
Chassis
-
Highest channel densityUser exchangeable TRIONTM modulesfor analog, digital, counter, CAN inputsSelectable resolution 16 or 24 bit
-
Product
Desktop/Wallmount Chassis
IPC-7120
-
Desktop/Wallmount Chassis with front I/O Interfaces for ATX/mATX Motherboard. With front I/O interface and four to seven expansion slots. Shockproof drive bay for one 5.25" ODD and two 3.5" HDDs. LED indicators for power status and HDD activity, Support four to seven half-size add-on cards.
-
Product
Desktop/Wallmount Chassis
IPC-730
-
Desktop/Wallmount Chassis with front I/O Interfaces for ATX/mATX Motherboard. Built-in ATX 3.0 high wattage PSU for high performance GPU applications. Great heat dissipation to ensure system performance and reliability. Optimized inner space to support powerful 450 W GPU cards. Front I/O for easy cabling and maintenance.
-
Product
2U Chassis
-
2U chassis supports comes in 2U 12 Bays to 2U 24 Bays with multiple configurations including AOI and SATA hard drive which can apply for various types of server systems.
-
Product
LXI/USB Modular Chassis
-
For applications requiring diverse switching functions but preferring an LXI interface, look no further than our LXI/USB modular chassis. These chassis are capable of hosting our extensive range of 3U PXI switching and simulation modules in an LXI environment, allowing remote control over a gigabit Ethernet connection. Additionally, our LXI/USB Chassis support up to 18 PXI modules and can be controlled via USB or Ethernet.
-
Product
cDAQ-9188, 8‑Slot, Ethernet CompactDAQ Chassis
781424-01
-
8‑Slot, Ethernet CompactDAQ Chassis - The cDAQ‑9188 is a CompactDAQ Ethernet chassis designed for small, distributed sensor measurement systems. The chassis controls the timing, synchronization, and data transfer between C Series I/O modules and an external host. You can use this … chassis with a combination of C Series I/O modules to create a mix of analog I/O, digital I/O, and counter/timer measurements. The chassis also has four 32‑bit general‑purpose counters/timers. You can access these counters through an installed, hardware‑timed digital C Series module for applications that involve quadrature encoders, PWM, event counting, pulse train generation, and period or frequency measurement.
-
Product
Chassis Dynamometers
-
SuperFlow offers a complete line of chassis dynamometers for everything from performance tuning to pre-emissions, mileage accumulation and heavy-duty truck testing. Unique features like true all-wheel-drive speed synchronization and trunnion mounted differentials allow our dynos to give you increased load capacity and test duration across the entire operating range. View our models below and give us a call at any time to discuss your project – remember we often design and build custom chassis dynamometers for unique needs.
-
Product
USB Modular Products Chassis
U2781A
-
The Keysight U2781A USB modular instrument chassis is a high-performance 4U high chassis that comes with a 200 W universal AC power supply and a built-in protection circuit. This portable chassis can house up to six Keysight USB modular products. The U2781A targets a wide range of applications in both industrial and scientific environments in the research and development (R&D), design-validation, and manufacturing fields. The primary advantage of this chassis is its synchronization capability between modules. This can help you to lower your cost of testing and accelerate your test system integration and development.
-
Product
6U cPCI / PXI / PXIe 6021 Full Size Chassis
-
The WIENER 6021 crate series can be outfitted with cPCI, PXI or PXIe backplanes to provide high performance chassis with highly reliable low-noise power supplies for these bus standards. Typical applications are data acquisition, beam line control and test instrumentation.
-
Product
8-Slot ShoeBox Chassis
AX60552
-
*Two 5.25 and one 3.5 HDD drive bays*Desktop or wallmount industrial computer chassis*Equipped with PS/2 type power supply
-
Product
OpenVPX Backplanes - 3U, 6U
-
OpenVPX provides a versatile, high-speed architecture utilizing the rugged Eurocard form factor. There are backwards-compatibility options with VME/64x with hybrid backplanes.
-
Product
cPCI 3U AC 300W
-
Hartmann’s cPCI Power Supplies comply with PICMIG and offer a wide range AC input. These supplies are developed and produced with quality and durability in mind, at a price that won’t bankrupt your project. Talk to a Hartmann representative today about your power needs!
-
Product
CompactPCI Serial 3U Backplanes
-
Hartmann Electronic’s cPCI Serial Backplanes are compliant to PICMG CPCI S.0 CompactPCI Serial specification. These backplane are outfitted with a cPCI S.0 system slot for the CPU on either the left or right side and then have up to eight CPCI S.0 peripheral slots.
-
Product
2U Rackmount Chassis
-
2U rackmount chassis is compact yet highly expandable computer chassis featuring modular design for easy maintenance. The 2U computer chassis provide the best support for various wallmount and rackmount system.
-
-
Product
6U Mini Chassis
cPCI395
-
The cPCI395 mini crate series offers hot-swappable, redundant power supplies in 9 slots, compact but modular designed desktop / 19″ chassis. A front-side-plug high performance DC fan is used for cooling with front to rear air flow. One or two redundant operating plug-in 250W cPCI power supplies provide sufficient power for all applications.
-
Product
2U Rackmount Chassis with Dual AC-Input Mini Redundant Power Supplies
cPCIS-6235R
-
The cPCIS-6235R Series sub-systems are designed for 6U cPCI boards with 80mm RTMs and are suitable for computer telephony applications. The chassis is 2U height and standard 19" rack mount width.
-
Product
3U VPX/OpenVPX graphics processor
VPX3-716
-
Curtiss-Wright Defense Solutions
The VPX3-716 is an industry-leading rugged 3U VPX/OpenVPX, high performance graphics processor based on the AMD Radeon E8860 Graphics Processing Unit (GPU). The E8860 meets the long lifecycle availability required for military programs through the use of a suite of CoreAVI software drivers and 20-year component supply program.
-
Product
3U VPX GPGPU Modules
-
Curtiss-Wright Defense Solutions
For systems requiring enhanced situational awareness or using deep learning frameworks for artificial intelligence applications, these highly engineered modules provide a field-proven hardware foundation. Answering the growing demand for (AI) and high-performance processing in deployed EW and ISR applications, our 3U VPX GPGPU modules are designed to deliver advanced capabilities in a highly rugged, SWaP-optimized board.
-
Product
9U VME Chassis
DP-VME-8001
-
DP-VME-8001 is a compact high performance, high reliability 9U VME chassis. The DP-VME-8001 provides the right platform options to meet system integration needs. The chassis complies with the features defined by the VME specifications. Rugged features, modular construction, integrated cooling are available.
-
Product
2U Rackmount Chassis
ACP-2320
-
2U Rackmount Chassis for ATX/ MicroATX Motherboard with Low-Profile Rear Bracket Option
-
Product
Chassis - Built as 60 or 75 ohm Matrix Configuration Switch Modules for High Bandpass
CXG Matrix
-
These Chassis are built as 50 or 75 ohm matrix configurations of 4x8 or 8x8 using tree switch configuration switch modules for high bandpass. The internal matrix block is wired out to BNC, SMA or other 50 or 75 ohm connectors. LEDs on the front panel show switch and power status. Add a Control Module to complete the system.
