Product

New Line of Frequency Synthesizers (Insight FS) from 36 to 1250 GHz

-

Insight Product Company

Insight Product Company

In the millimeter wave range, each synthesizer covers a full waveguide band (Q, U, V, E, W, F, D, G, Y, J). Insight FS provides several options for frequency and amplitude modulation (analog FM/AM modulation, frequency manipulation, pulses modulation).  Insight FS are compact in size and controlled by IEEE, analog input, or manually.

Product

UV & Visible Frequency Mixing Module

SolsTiS EMM

-

M Squared Lasers

SolsTiS EMM - M Squared Lasers

The SolsTiS External Mixing Module (SolsTiS EMM) provides fully automated tuning in the visible (480-670 nm) and IR (1.1-4.5 µm) with further extensions options into the UV (300-350 nm). It delivers high stability sum and difference frequency mixing of SolsTiS wavelengths with other single frequency sources, primarily via high efficiency single pass mixing in PPLN. This all-solid state solution for wavelength coverage supersedes dye lasers, removing the hazards and instabilities associated with this toxic gain material. SolsTiS EMM delivers unparalleled performance and reliability, enabling you to automatically tune and scan over a broad wavelength range.

Product

125 Mbps Low Frequency Bit-Error-Ratio Test System

OPBK125

-

Optellent, Inc.

OPBK125 - Optellent, Inc.

The OPTELLENT OptoBERT™ OPBK125 is a costeffective easy-to-use bit-error-ratio (BER) measurement system for testing components and systems in R&D and manufacturing environments as well as field installations. It incorporates a pattern generator, clock recovery circuits, and a bit-error-ratio analyzer in one compact module that provides electrical interfaces at data rates up to 125 Mb/s.

Product

Frequency Multipliers

-

Qorvo

Qorvo

A nonlinear electronic circuit that takes an input signal and generates an output signal at an integer multiple (like 2x, 4x, 8x) of the input frequency.

Product

Standard Transmitter

Tipix 3000

-

IRIS Instruments

Tipix 3000 - IRIS Instruments

The TIPIX 3000 is a transmitter purposely designed for deep Induced Polarisation or Resistivity sounding investigations. This transmitter is generally used together with V-Fullwavers or Elrec Pro receivers.

Product

Standard Voltage 9-Pin D-Type Connector & Cable Accessories

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

The Standard Voltage 9-Pin D-Type connector is used on PXI switching products to provide a low density connector solution. Connection solutions for modules with High Voltage Rating D-Type connectors are also available.

Product

Rubidium Oscillator

-

IQD Frequency Products Ltd

IQD Frequency Products Ltd

Rubidium oscillators are a type of atomic clock and are the most accurate time standards known and are used as time distribution services to control things such as telecommunications infrastructure, TV broadcasts and global navigation satellite systems (GPS).

Product

Standard Mechanical Calibration Kit, DC To 9 GHz, Type-N, 50 Ohm

85032F

-

Keysight Technologies

85032F - Keysight Technologies

The Keysight 85032F calibration kit contains precision 50 ohm type-N standards used to calibrate Keysight network analyzers. Standards include fixed terminations, open circuits, and short circuits in both genders. This kit is specified from dc to 9 GHz.

Product

AC Power Sources, Frequency Converter

MAC-01, -02, -03

-

Compact Power Company

MAC-01, -02, -03 - Compact Power Company

For reliability, all models of the Titan AC Power Sources/Frequency Converters are fully current limit protected against either continuous or transient short circuit or overload conditions. When an overcurrent condition exists, the internal current control loop overrides the voltage control loop and scales back the sinewave drive until it sees a safe output current level.

Product

Standard - 5.00 (142.00) - 8.30 (235.00)

P3325-1

-

ECT

P3325-1 - ECT

Current Rating (Amps): 10Average DC Resistance lower than (mOhm): 10Test Center (mil): 125Test Center (mm): 3.18Full Travel (mil): 100Full Travel (mm): 2.54Recommended Travel (mil): 66Recommended Travel (mm): 1.68Overall Length (mil): 645Overall Length (mm): 16.38

Product

Absolute Contamination Standards (ACS)

-

VLSI Standards, Inc.

VLSI Standards, Inc.

The Absolute Contamination Standard (ACS) is used to calibrate instruments which size and detect particles on the surface of bare silicon wafers. Use ACS to characterize particles, before particles characterize products.

Product

Capacitance Standard

GenRad 1417

-

IET Labs

GenRad 1417 - IET Labs

The GenRad 1417 Four-Terminal Capacitance Standard consists of a 1 F standard capacitor and two precise inductive voltage dividers used to scale the value of the 1 F capacitor up to 1 F in decade steps. This arrangement provides accuracy and stability unattainable with very high-value true capacitors.

Product

Standard IR Target Projectors

-

Santa Barbara Infrared, Inc.

Santa Barbara Infrared, Inc.

Santa Barbara Infrared’s 14000Zi Series reflective infrared target projectors are turnkey test systems for electro-optical (E-O) testing of FLIRs and other infrared (IR) imaging systems. The standard target projectors are assembled from SBIR’s STC Series Collimators, Infinity Blackbodies and 300 Series Target Wheels. SBIR also offers a standard athermal target projector with a 5.7° field of view (FOV).

Product

Standard Transmitter

Tipix 2200

-

IRIS Instruments

Tipix 2200 - IRIS Instruments

The TIPIX 2200 is a transmitter purposely designed for deep Induced Polarisation or Resistivity sounding investigations. This transmitter is generally used together with V-Fullwavers or Elrec Pro receivers. This entry-level instrument has been designed for an ease of use and for a good productivity together with a strong protection against misuse. This very robust device has proven to be reliable even in very cold weather (up to -40°C) or in wet environment. It is able to inject up to 2200W in the soil and to inject up to 13A, so that it is suitable, even on conductive soils, to measure resistivity and IP at medium range depths. It is powered by standard generator.

Product

Incremental > Standard Encoders - Hollow Shaft

-

SCANCON

SCANCON

Incremental > Standard Encoders - Hollow Shaft

Product

Frequency Converters

-

Ducommun Inc

Ducommun Inc

Ducommun's frequency converter families include waveguide detectors (FAS), passive and active multipliers (FMP and FMA), up and down converters (FUB and FDB), harmonic mixers (FDH), subharmonically pumped up and down converters (FUS and FDS) and phase detectors and single sideband modulators (FPB and FSS). These devices are offered in 7 waveguide bands to cover entire 18 to 110 GHz frequency spectrum. These converters employ high performance GaAs Schottky beamlead diodes and DLT's proprietary circuit configuration to produce superior performance, such as low conversion loss and up to full waveguide instantaneous operation bandwidth.

Product

High Frequency Coaxial Analytical Probes

-

D-COAX, Inc.

D-COAX, Inc.

D-COAX offers four analytical probe models: HyPac model for package characterization, and two models, Omni and OmniJet, for board level characterization, and DP1.4mm differential, single-ended probe.

Product

8-Channel, 100 MHz Counter/Timer/Frequency Meter Function Card

ProDAQ 3808

-

Bustec Ltd.

ProDAQ 3808 - Bustec Ltd.

The ProDAQ 3808 function card, an enhanced version of the ProDAQ 3806 counter/timer function card, is designed to operate in one of three modes: pulse counter, frequency meter, or time interval counter. In the pulse counter and frequency measurement modes, users can process incoming signals of up to 25 MHz on each of the six channels. A time interval counter range is divided into six sub-ranges, covering times from 40 ns to 20000 s with a maximum resolution of 10 ns. For pulse-width measurements, the same ranges apply.