Product

Digital LOOP/PSC/LOAD Tester

1825 LP

-

Standard Electric Works Co., Ltd

1825 LP - Standard Electric Works Co., Ltd

● Microprocessor-controlled.● Measures the voltage drop as if 16A was flowing between Line and Neutral.● Displays voltage without current (V at 0A).● Display voltage as if 16A flowing between Line and Neutral (V at 16A).● Loop test for L-E● PSC between L-N.● Single one smart push button operation; ON, Scroll through results and menus.● Checks wiring integrity (LEDs).● Auto off/auto ranging (software range).● Combined prospective short circuit current, loop and load tester.● Display can be customized for large orders.

Product

Dummy Load

-

RKR Designs LLC

RKR Designs LLC

Dummy load is capable of dissipating four times the legal limit 6 kW for 2 minutes and legal limit 1500 watts key down, forever. It covers the 160 meter to 6 meter bands (actually 1 Mhz-60 MHz continuously). It is a dry dummy load intended for testing amplifiers and station conditions. Two fans on the rear of the unit are automatically turned on when the internal temperature reaches 120°F/49°C . The unit runs off a universal AC supply. Simple to operate and use, the dummy load includes an RF sample output of -60 dBc.

Product

Hand-Held/Digital Load Tester

6030DV

-

Associated Equipment Corp.

6030DV - Associated Equipment Corp.

• Full 125 Amp load Tests 12 Volt and 24 Volt batteries (DUAL LOAD) alternators and starters on all types of vehicles• PATENTED• Made in USA of US and Global Components

Product

PXIe High Voltage Programmable Resistor Module, REDEL Connector

42-230-251-HI

-

Pickering Interfaces Inc.

42-230-251-HI - Pickering Interfaces Inc.

The 40-230-251-HI (PXI) and 42-230-251-HI (PXIe) are programmable resistor modules with 2 channels which can be set between 4.5Ω and 2.95MΩ with 0.25Ω resolution with maximum voltage of 1.2kV. The 40/42-230 range provides a simple solution for applications requiring voltage handling up to 1kV (9-pin D-type connector) or 1.2kV (22-pin REDEL connector).

Product

Programmable, 2-Channel Low-Pass Filter Module

AAF-2Fe

-

Alligator Technologies

AAF-2Fe - Alligator Technologies

Programmable, 2-Channel Low-Pass Filter Module. The AAF-2Fe may be used with the AAF-3PCI, AAF-3, AAF-2, or AAF-1 filter boards. 

Product

User Programmable Logic

PCIe-Spartan-VI

-

Dynamic Engineering

PCIe-Spartan-VI - Dynamic Engineering

User Programmable logic - Spartan VI 100 with 40 differential and 12 TTL IO plus PLL(24). 16 DMA ports, to support 8 full duplex byte lanes between the Bus and User FPGAs. Additional GPB interface to support R/W operations to registers etc. Driver and reference SW package includes user defined R/W to User FPGA to support User Architecture without a new driver.

Product

Load Cell Simulators / Testers

-

Load Cell Central

Load Cell Central

A load cell simulator is a handy tool during initial setup, particularly of a batching by weight scale. It replaces the load cell(s) in the system allowing the scale technician to simulate various weights that will trigger the outputs setpoints for activating valves, gates, and mixers. These products are a must for anyone involved in scale installations and repairs.

Product

Force Load Cells

-

TE Connectivity Ltd.

TE Connectivity Ltd.

TE Connectivity (TE) offers load cell assemblies for test and measurement applications that require high performance or unique packaging. Our broad range of packaged load cells feature foil strain gages enabling OEM's to measure force with low cost and high reliability. The gages produce a high level of output signal for a low operating stain using inorganic materials to offer long term stability. Load cells are gaged in a variety of materials from high strength stainless steel to special alloys.

Product

Load & Fatigue Testing

-

DATASYST Engineering & Testing Services, Inc.

DATASYST Engineering & Testing Services, Inc.

Due to variations in types and levels of load and fatigue exposure, DATASYST works with each client to determine the best possible test plan to capture the information and issues that may be present in application.

Product

ResMap or DualMap Manual Load

-

Creative Design Engineering, Inc.

Creative Design Engineering, Inc.

*Type: Table Top*Wafer load: Manual *Wafer size: 2" to 8", 152mm x 152mm*Mini Environment: N/A*Probe Changer: N/A*Aligner: N/A*Size: 12" x 19" x 10"*Range: 1m/ to 10M/*Accuracy: 0.5%*Repeatability: 0.02% *Static Repeatability: 0.1% dynamic

Product

Mini Low Profile Load Cell Universal/ Tension or Compression

MLP SERIES

-

Transducer Techniques, Inc

MLP SERIES - Transducer Techniques, Inc

The model MLP Series load cells were designed with economy as first priority. They are a scaled down version of our successful LPO Series Load Cells. MLP-10 through MLP-300 are anodized aluminum and the MLP-500 through MLP-1K are made from 17-4ph heat treated stainless steel. The unique low profile design of the MLP Series provides excellent stability for in line applications for tension and/or compression, while saving space at the same time.

Product

48V / 250 Amp Load

EL15-48M

-

Manatronics Pty Ltd

EL15-48M - Manatronics Pty Ltd

For Telecom Rectifier and Power Supply testing. This particular Load has been designed to operate with Telecom 48V Rectifiers and Power Supplies with output Voltages in the range of 38V to 60V and is extremely cost effective.

Product

Press Force Load Cell

6000 Series

-

HITEC Sensor Solutions Inc.

6000 Series - HITEC Sensor Solutions Inc.

Press Force Load Cells are strain gage based transducers for press-force monitoring. This type offers capacities up to 100 kN with compensated temperature performances. Cable is contained within a stainless steel spring for strain relief purposes for additional protection.

Product

Programmable 70W Electronic Load

MightyWatt R3

-

kaktus circuits

MightyWatt R3 - kaktus circuits

The All-New MightyWatt revision 3 turns your Arduino Uno R3 or Arduino Zero (M0/M0 Pro) into an electronic load capable of dissipating 70 Watts in a very small form factor. Ideal for testing power supplies, batteries, solar cells, fuel cells or power amplifiers. MightyWatt R3 has a research-grade electronics and is aimed not only at hobbyists but also at professionals.

Product

Suitable For Strain Gauge / Load Cell Sensors

SEM1600B -

-

Labfacility Ltd.

SEM1600B - - Labfacility Ltd.

Suitable For Strain Gauge / Load Cell Sensors

Product

Battery Load Bank

K-3980

-

Kongter Test & Measurement Co., Limited

K-3980 - Kongter Test & Measurement Co., Limited

Kongter offers a series of customized DC load banks with many different models for constant current battery discharge test and battery capacity test. They cover a wide voltage range from 12V to 480V nominal voltages with current up to 600A. They are widely applied in various industries. With its optional battery Data Acquisition Case (DAC), discharge values of EACH cell could be monitored in battery load bank and PC software simultaneously by using Kongter’s data view software.

Product

Electronic DC Load

DL Series

-

Vitrek Corporation

DL Series - Vitrek Corporation

Industry’s Easiest-To-Use DC Load – Vitrek’s DL Series Electronic Loads are available in a multiple configurations to meet your unique application requirements. No other electronic DC load on the market today is easier to use. Equipped with a full color LCD touchscreen display, the unit can quickly be set up for your next test. In addition, the DL is equipped with a comprehensive self-test that ensures that all loading and measurement circuitry is functioning properly.

Product

Load Cell Transducer

-

Unitech Scales And Measurements Pvt. Ltd

Unitech Scales And Measurements Pvt. Ltd

Force can be measured by different methods, one of the most effective and accurate method is by using strain gauge based load cells. Four Transducer class strain gauges are bonded on the specimen and are connected in the form of Whetstone Bridge. The specimens are of different types depending on the requirement such as S, column, beam, ring, shear beam, binocular etc. UNITEH’S Load Cells are used for wide applications rite from commercial weighing scale to industrial process controlling, R & D applications and educational institutions. UNITECH’S manufacture load cells from 1Kg to 100Tons for compression or tension or universal (Compression and tension) applications. We also undertake custom built load cells for specific requirement and for OEM users.

Product

High Power DC Electronic Load

IT8800 Series

-

I-TECH Electronic Co., Ltd

IT8800 Series - I-TECH Electronic Co., Ltd

IT8800 series has wide power range 150W~10KW, voltage and current measurement speed up to 50KHZ, resolution up to 0.1mV/0.01mA, adjustable measurement current rising speed 0.001A/us~2.5A/us, built-in RS232/GPIB/USB interface. IT8800 series has wide application fields because of its high performance products, it has been applied to LED lighting, aerospace, automotive electronics and other fields.

Product

Heavy Load Ball Screw with Caged Ball Structur

HBN

-

THK America, Inc.

HBN - THK America, Inc.

Heavy Load Ball Screw with Caged Ball Structure. Heavy load ball screws with the caged ball structure (HBN model) drastically improve the rated load compared to the conventional products by utilizing the optimum internal structure for use in heavy load condition. In this model, the caged ball structure is adopted between balls to eliminate collisions and mutual frictions of the balls and improve the lubricant maintenance. This modification brings about a longer lifetime under heavy load conditions.

Product

Signal Converters & Load Cell Signal Converter

-

Mantracourt Electronics Ltd

Mantracourt Electronics Ltd

Mantracourt provide a range of signal converter modules which take load cell or strain bridge inputs and provide a data output in a variety of bus and protocol formats. Hardware formats include RS232, RS422 RS485, CAN and USB. Signal converter protocols include Industry Standards such as MODBUS, or Mantracourt’s own proprietary protocols which have been optimised for either ease of use (MantraASCII2) or higher speed communications (MantraBus2).