Application Security Testing
assures web application vulnerabilities are identified.
See Also: Penetration Testing
-
Product
ALD Applications
-
Atomic Layer Deposition (ALD) has the potential to optimize product design across a wide array of applications from making silicon chips run faster, to increasing the efficiency of solar panels, to improving the safety of medical implants.
-
Product
Phase Noise Measurement Application
N9068A
-
One-button measurements for analyzing phase noise in frequency domain (log plot) and time domain (spot frequency)Compatible with phase noise measurement personality in Keysight PSA and ESA spectrum analyzers Runs inside the PXA, MXA, EXA signal analyzers and MXE EMI receiver
-
Product
Safety Compliance Test System
EN 60601
Test System
Test system for electrical safety compliance testing of medical products in accordance with EN 60601-1, 3rd edition.The system is equipped with three test fixtures which are connected in parallel order to reduce the number of setup tasks for different variants in the course of day-to-day manufacturing processes. Its purpose is to test medical products, e. g. patient monitors, which are employed at hospitals to monitor heartbeat and oxygen saturation.Based on the integrated electrical safety tester by Associated Research, in combination with an AC power source and a switching matrix, it is possible to fully automate tests like for instance AC/DC high-voltage tests, insulation resistance measurements, earth connection tests and leakage current measurements.The required occupational safety is provided by a high-voltage safety hood in accordance with EN 501191. The entire safety technology, as well as the control PC, is mounted in an aluminum-profile cart.
-
Product
2.5 inch SATA SSD for Industrial Embedded Applications
2.5 inch SATA SSD Series
-
ADLINK’s industrial 2.5 inch SATA SSD Series delivers all the advantages of today’s flash disk technologies with SATA 6Gb/s interface, and is fully compliant with the standard 2.5" form factor, providing low power consumption and hot-swap capability. Capacities of up to 2TB are available and read/write speeds of up to 560MB/s and 500MB/s respectively are supported.
-
Product
MIL-STD-1553 IRIG 106 Chapter 10 Streaming Application
F-SIM-1553-CH10-STREAM
-
Avionics Interface Technologies
Streams MIL-STD-1553 Data from AIT MIL-STD-1553 interfaces in Chapter 10 Format - Software application which is Compatible with all AIT MIL-STD-1553 Interfaces - Capable of streaming data captured from one or multiple MIL-STD-1553 Bus Interfaces - Streamed data can be sent to a single network system or multicast on the Ethernet LAN - Compatible with AIT F-SIM-1553-AVOE analyzer or 3rd party Chapter 10 systems - Timestamps & Errors detected embedded in Chapter 10 stream
-
Product
Teslameter / Gaussmeter For Industrial Application
3MH3
-
The 3MH3 Teslameter/Gaussmeter is a cutting-edge device designed for precision measurement in industrial applications. It features fully integrated 1-, 2-, and 3-axis Hall Probes that deliver high accuracy magnetic field readings across a wide frequency range, including DC and AC up to 1kHz. With an impressive resolution of 100ppm and an accuracy rating of up to 0.05%, the device ensures reliable performance in various settings, from quality control of permanent magnets to magnetic field mapping and process monitoring in production lines.Equipped with a digital module, the Teslameter not only provides an LCD display for real-time monitoring of magnetic field components (Bx, By, and Bz) but also includes a temperature measurement feature, enhancing the device's functionality for comprehensive data analysis. Additionally, automatic data acquisition is possible through USB and RS232 connections, allowing seamless integration into existing measurement routines with widely used programming tools like LabVIEW, Basic, and C++. Whether used in research labs or industrial environments, this Teslameter is engineered to fulfill diverse measurement needs with unmatched precision and ease.
-
Product
Fibre Channel Simulator & Analyzer Applications Software
fcXplorer Simulyzer
-
Avionics Interface Technologies
FC-1, FC-2, and FC4 Analyzer modes and displays - Frame parser for custom display of FC frames and payload data - Captured data can be saved as binary or “csv” files - User-defined trigger and filter features - “Live Capture” real-time display - Error detection and reproduction - Complete control of the transmit link - Replay of recorded data with precision timing or corrected protocol timing - Special testing functions such as defining command/response for exchange management
-
Product
SST Security Assessment
-
Self-Service Terminal (SST) penetration testing is an activity which identifies vulnerabilities in SST that may potentially exist due to the lack of physical security measures, technical configuration or process controls.
-
Product
ARINC 615/615A Tablet PC Secure PDL Solution
PDL-615
-
Avionics Interface Technologies
The PDL-615 is a secure rugged, portable, tablet PC based ARINC 615 & ARINC 615A PDL solution.
-
Product
Hybrid Network Security Policy Management
AlgoSec Cloud
-
Across cloud, SDN, on-premises and anything in between - one platform to manage it all.
-
Product
Cloud Security Testing
-
Using a cloud infrastructure is no more a new phenomenon in the digital world. Businesses use it as a basic practice now a days due to numerous benefits associated with it. Hence, it should be a top most priority for the businesses to secure their cloud infrastructure as that’s the nucleus of their business from all aspects. In cloud security testing, the cloud infrastructure is screened to identify security risks and the areas which can be exploited by the attackers. Cloud security testing is mainly performed to ensure that cloud infrastructure can protect the confidential information of an organization. QA Mentor adopts three different approaches during the cloud security testing process:
-
Product
Application Specific LC Systems
Method Scouting System
-
Method Scouting System is a method development system based on Shimadzu’s UHPLC technology. The combination with Method Scouting Solution dedicated control software achieves a fast and accurate method scouting workflow, offering excellent support for method development.
-
Product
EcoKit 11R - The Cost-Effective 19" Subrack For Railway Applications
EcoKit-11R
-
Shielded subrack with aluminum side panels. A cost-effective solution for PCB mounting systems with Eurocard depths of 160 or 220 mm. Tested and certified according to EN 50155.
-
Product
3-Axis Non-Robotic Automated Testing System
AT3
Test Instrument
The Instron AT3 is a space-efficient, highly adaptable 3-axis mechanical testing platform designed for automated execution of tensile, compression, flexural, and lap shear tests. Built to comply with a broad spectrum of ASTM and ISO standards, it’s well-suited for evaluating materials such as plastics, elastomers, thin films, foils, and metals. The system streamlines the entire testing workflow from specimen measurement and handling to strain measurement and specimen disposal—enabling users to load up to 160 samples and let the AT3 take care of the rest. Boost productivity, reduce manual intervention, and achieve consistent, dependable results with every test cycle.
-
Product
Chatbot Testing
-
QAble tests chatbots and conversational AI systems across NLP accuracy, dialogue flow correctness, fallback handling, LLM response quality, and backend integrations, ensuring your bot delivers the right response every time, including when the conversation goes off-script.
-
Product
Application Performance Monitoring Tool
APPEDO
-
Elevate your application's performance and ensure an exceptional user experience with Appedo, the comprehensive Application Performance Monitoring (APM) solution. Appedo provides detailed insights into your application's performance from multiple perspectives, enabling proactive optimizations and rapid troubleshooting.
-
Product
Hi-Pot Testing
-
The CableEye HVX System combines our M3U tester with a high voltage module to provide Hi-Pot testing of insulation resistance and dielectric breakdown up to 1500Vdc and 1000Vac.
-
Product
ATE Self Test Fixtures
AL663
Test Fixture
AL663 fixtures include all the electronic parts required to perform an effective test platform diagnostic. The AQ818 device allows to perform a series of tests, obtaining a report of the faulty instruments or switch modules and also a report about the relay contacts estimated life.
-
Product
Stackable And Configurable Signal Generator For CAN Applications.
K- Volt
-
The K-Volt can be used to generate fast configurable analog and digital signals from CAN messages. Designed for high speed and accurate simulation of sensors (For example HIL and Replay systems). The K-Volt can be connected directly to a PC via a USB connection.
-
Product
Hipot Testing
-
Educated Design & Development, Inc.
Automated Digital Hipot Testers, models HP1000 & HP2000 Part of ED&D's leading-edge "Millennium Series" line of electrical testers Makes your job easy and safe! Simply put, the Millennium Series testers from ED&D make all others obsolete. The world's fastest, easiest and most affordable automated dielectric withstand (hipot) testers. Also available with universal receptacle! Please visit the Hipot Blog to learn more about Hipot Testing.
-
Product
Penetration Testing
-
Tailored penetration testing scenarios to challenge common attack vectors and unique environments.
-
Product
Functional Testing and Test Engineering
-
Customer-supplied or developed in-house• Ruggedization of existing (lab-built) fixtures• Co-develop hardware/software• Deployment, implementation, and training• Engineering evaluation tools• Design verification• Medical device evaluation• Manufacturing test systems• Verification test systems• Go/No-go tests• Serialization, recordkeeping, and datalogging• Troubleshooting failed units with other test platforms
-
Product
Test Software
ATI
-
The ATI Test System Software and its utilities are built on a core of mature, object-oriented software components that have been thoroughly field tested and refined over many years. All of ATI's systems share a common core functionality and an easy to use program interface. Our highly skilled software and engineering experts are able to integrate nearly any OEM test or embedded systems equipment into the test system's design whether it's standard or proprietary.
-
Product
VLSI Test System
3380P
Test System
The 3380D/3380P/3380 test system have 4 wires HD VI source and any-pins-to-any-site high parallel test (multi-sites test) functions (512 I/O pins to test 512 ICs in parallel) that can meet the upcoming higher IC testing demands.
-
Product
Test System
2000/DATS
-
WesTest Engineering Corporation
The WesTest-2000/DATS features Teradyne's high performance Digital Test Instrument and state-of-the-art intrsuments from Agilent, Elgar and North Atlantic.
-
Product
Test Chambers
-
Test Chambers: climate test chamber, climactic temperature test chamber, humidity seed chamber, medical stability test chamber, plant growth chamber, salt spray test chamber, temperature and humidity test chamber, UV test chamber, xenon test chamber, and more.
-
Product
Integration Test
-
We test the interfaces between the functions and modules and the time dependence between the different functions to ensure that they meet the specification determines by the Classification Tree Method (CTM)
-
Product
Thermal Security Camera with Onboard Analytics
Triton™ F-Series ID
-
The FLIR Triton™ F-Series ID thermal security cameras set the new standard of perimeter protection for critical infrastructure. The Triton F-Series ID features best-in-class thermal imaging detail and high-performance onboard analytics for classifying human or vehicular intrusions. FLIR’s premium line offers five models with full 640 × 480 thermal resolution, longer detection ranges, and better analytics performance than ever before.
-
Product
In-Circuit Testing and Test Engineering
-
5184 Test NodesHPUX or Windows60 Mhz ASRU Frequency Counter, Timer10 Mhz Clock, 6 Mhz data ratesVector Test for VLSI, PLCC & ASICSTestjet and VTEP Vectorless TestingAdvanced Boundary ScanSilicon Nails AvailableSeries V upgradeable
-
Product
Secure DNS
-
DNS attacks are still a regular occurrence for cybercriminals and many companies are targeted by such attacks not only once a year. With Secure DNS, you not only ensure secure access to your website, but also benefit from extra protection against such attacks.
